Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. C. Hseuh, C. J. Liaw, and M. Mapes, “Design of the SNS Accumulator Ring Vacuum Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA116, pp. 1345-1347.
[n] P. Musumeci et al., “Status of the SPARC Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
[n] D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The SNS Ring to Target Beam Transport Line”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA94, pp. 1297-1299.
[n] M.-Y. Huang, “Key issues in the high intensity beam commissioning for the CSNS RCS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS057, unpublished.
[n] B. Cheymol, A. Jansson, and T. J. Shea, “Wire Scanner Design for the European Spallation Source”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF10, pp. 830-832.
[n] A. Ghigo et al., “CTF3 Prototypes: Design, Tests and Measurements”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB009, pp. 2742-2744.
[n] D. J. Crawford, R. Andrews, T. W. Hamerla, J. Ruan, J. K. Santucci, and D. Snee, “Assembly and Installation of the UV Laser Delivery and Diagnostic Platform and the Photocathode Imaging System for the ASTA Front-end”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2618-2620. doi:10.18429/JACoW-IPAC2014-WEPRI059
[n] D. Kramer, B. Dehning, C. Fischer, S. C. Hutchins, and J. Koopman, “Optical Design for BIPM Imaging System”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT007, pp. XX-XX.
[n] O. Karamyshev, “A New Design of PET Cyclotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2977-2980. doi:10.18429/JACoW-IPAC2022-THPOMS016
[n] S. Ivanov, “Effect of Feedbacks and Below-Threshold Instabilities on Bunched-Beam Longitudinal Diffusion Inflicted by and External RF-Noise”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1087-1090.
[n] A. Schempp et al., “High current RFQ using laser ion source”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP11, pp. 315-317.
[n] G. D. Kim et al., “Facility for MeV Degree Neutron Capture Cross Section at KIGAM”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19009, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- H. C. Hseuh, C. J. Liaw, and M. Mapes, “Design of the SNS Accumulator Ring Vacuum Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA116, pp. 1345-1347.
- P. Musumeci et al., “Status of the SPARC Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
- D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The SNS Ring to Target Beam Transport Line”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA94, pp. 1297-1299.
- M.-Y. Huang, “Key issues in the high intensity beam commissioning for the CSNS RCS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS057, unpublished.
- B. Cheymol, A. Jansson, and T. J. Shea, “Wire Scanner Design for the European Spallation Source”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF10, pp. 830-832.
- A. Ghigo et al., “CTF3 Prototypes: Design, Tests and Measurements”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB009, pp. 2742-2744.
- D. J. Crawford, R. Andrews, T. W. Hamerla, J. Ruan, J. K. Santucci, and D. Snee, “Assembly and Installation of the UV Laser Delivery and Diagnostic Platform and the Photocathode Imaging System for the ASTA Front-end”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2618-2620.
- D. Kramer, B. Dehning, C. Fischer, S. C. Hutchins, and J. Koopman, “Optical Design for BIPM Imaging System”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT007, pp. XX-XX.
- O. Karamyshev, “A New Design of PET Cyclotron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2977-2980.
- S. Ivanov, “Effect of Feedbacks and Below-Threshold Instabilities on Bunched-Beam Longitudinal Diffusion Inflicted by and External RF-Noise”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1087-1090.
- A. Schempp et al., “High current RFQ using laser ion source”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP11, pp. 315-317.
- G. D. Kim et al., “Facility for MeV Degree Neutron Capture Cross Section at KIGAM”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19009, pp. XX-XX.
Back to search