Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Sullivan et al., “Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P043, pp. 3330-3332.
[n] E. Gianfelice-Wendt et al., “Longitudinal Positron Polarisation in HERA-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT044, pp. 644-646.
[n] D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770.
[n] O. A. Shevchenko et al., “Electronic Modulation of the FEL-Oscillator Radiation Power Driven by ERL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 98-101. doi:10.18429/JACoW-FEL2019-TUP024
[n] P. Pierini et al., “Limits for the Operation of the European XFEL 3.9 GHz System in CW Mode”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1023-1026. doi:10.18429/JACoW-IPAC2017-MOPVA066
[n] H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
[n] M. Lee, “Model-Based Expert Systems for Linac Computer Controls”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-05, pp. 470-473.
[n] S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
[n] O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3617-3619. doi:10.18429/JACoW-IPAC2014-THPME153
[n] W. Blokland and G. Armstrong, “A CompactRIO-based Beam Loss Monitor for the SNS RF Test Cave”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC006, pp. 1050-1052.
[n] O. A. Plotnikova, V. I. Kaplin, S. E. Karnaev, A. N. Kvashnin, and S. P. Vasichev, “The Total-Temperature Measurements and Interlock System at the VEPP-4M Collider”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP012, pp. 105-107.
[n] F. D. Hudson, “Build the Future Harnessing Advanced Technology Innovations and Inclusion”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper TUKPP01, pp. XX-XX.
[n] T. Ogitsu et al., “Superconducting Focusing Solenoid for X-band Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ08, pp. 1405-1407.
[n] V. Ptitsyn et al., “eRHIC, Future Electron-ion Collider at BNL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT170, pp. 923-925.
[n] C. Bloomer, G. Rehm, and C. A. Thomas, “Numerical and Experimental Investigation of the Contamination of X-ray Beam Position Monitors by Bending Magnet Edge Radiation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC007, pp. 1053-1055.
[n] C. Olson, “Achromatic Magnetic Lens Systems for High Current Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-03, pp. 34-37.
[n] H. Ego and Y. Otake, “Design of the Transverse C-band Deflecting Structure for Measurement of Bunch Length in X-FEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC023, pp. 1098-1100.
[n] A. N. Zhuravlev et al., “The VEPP-4M Dynamic Aperture Determination Through the Precise Measurement of the Beam Lifetime”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB04, pp. 238-240.
[n] A. Schempp et al., “Performance of the DESY RFQs”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-14, pp. 73-75.
[n] R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
[n] S. Henderson et al., “Beam Dynamics Studies and Beam Quality in the SNS Normal-Conducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE057, pp. 3381-3383.
[n] A. Martinez Landete et al., “A flexible validation framework for streamlining hardware testing in accelerator control systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1831-1837. doi:10.18429/JACoW-ICALEPCS2025-THPD101
[n] L. Harwood, “Upgrading the CEBAF Accelerator to 12 GeV: Project Status”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP018, pp. 70-72.
[n] F. Stulle, A. Adelmann, and M. Pedrozzi, “A Bunch Compressor for the CLIC Main Beam”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP006, pp. 40-42.
[n] G. Geschonke, “Status of the CLIC Test Facility (CTF3)”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MO2001, pp. 11-15.
[n] E. L. Wright, “High-Power RF Sources”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MO2003, pp. 17-17.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Sullivan et al., “Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P043, pp. 3330-3332.
- E. Gianfelice-Wendt et al., “Longitudinal Positron Polarisation in HERA-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT044, pp. 644-646.
- D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770.
- O. A. Shevchenko et al., “Electronic Modulation of the FEL-Oscillator Radiation Power Driven by ERL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 98-101.
- P. Pierini et al., “Limits for the Operation of the European XFEL 3.9 GHz System in CW Mode”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1023-1026.
- H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
- M. Lee, “Model-Based Expert Systems for Linac Computer Controls”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE4-05, pp. 470-473.
- S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
- O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3617-3619.
- W. Blokland and G. Armstrong, “A CompactRIO-based Beam Loss Monitor for the SNS RF Test Cave”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC006, pp. 1050-1052.
- O. A. Plotnikova, V. I. Kaplin, S. E. Karnaev, A. N. Kvashnin, and S. P. Vasichev, “The Total-Temperature Measurements and Interlock System at the VEPP-4M Collider”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP012, pp. 105-107.
- F. D. Hudson, “Build the Future Harnessing Advanced Technology Innovations and Inclusion”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper TUKPP01, pp. XX-XX.
- T. Ogitsu et al., “Superconducting Focusing Solenoid for X-band Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ08, pp. 1405-1407.
- V. Ptitsyn et al., “eRHIC, Future Electron-ion Collider at BNL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT170, pp. 923-925.
- C. Bloomer, G. Rehm, and C. A. Thomas, “Numerical and Experimental Investigation of the Contamination of X-ray Beam Position Monitors by Bending Magnet Edge Radiation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC007, pp. 1053-1055.
- C. Olson, “Achromatic Magnetic Lens Systems for High Current Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-03, pp. 34-37.
- H. Ego and Y. Otake, “Design of the Transverse C-band Deflecting Structure for Measurement of Bunch Length in X-FEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC023, pp. 1098-1100.
- A. N. Zhuravlev et al., “The VEPP-4M Dynamic Aperture Determination Through the Precise Measurement of the Beam Lifetime”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB04, pp. 238-240.
- A. Schempp et al., “Performance of the DESY RFQs”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-14, pp. 73-75.
- R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
- S. Henderson et al., “Beam Dynamics Studies and Beam Quality in the SNS Normal-Conducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE057, pp. 3381-3383.
- A. Martinez Landete et al., “A flexible validation framework for streamlining hardware testing in accelerator control systems”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1831-1837.
- L. Harwood, “Upgrading the CEBAF Accelerator to 12 GeV: Project Status”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP018, pp. 70-72.
- F. Stulle, A. Adelmann, and M. Pedrozzi, “A Bunch Compressor for the CLIC Main Beam”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP006, pp. 40-42.
- G. Geschonke, “Status of the CLIC Test Facility (CTF3)”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MO2001, pp. 11-15.
- E. L. Wright, “High-Power RF Sources”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MO2003, pp. 17-17.
Back to search