JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. A. Bogacz, “The LHeC ERL - Optics and Performance Optimizations”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 34-38. doi:10.18429/JACoW-ERL2019-TUCOXBS04
[n]	W. Chen, Y. Kang, B. Jiang, C. Feng, and H. Sun, “A modified round to flat beam transformation lattice for angular dispersion induced microbunching technique”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2770-2773. doi:10.18429/JACoW-IPAC2023-WEPA050
[n]	J. Yang, K. Tanimura, Y. Yoshida, and J. Urakawa, “RF Gun Based Ultrafast Electron Microscopy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2259-2261. doi:10.18429/JACoW-IPAC2015-TUPWI008
[n]	P. C. Wang, X. Sun, S. Liu, C. Meng, H. Wang, and D. H. Zhu, “Gas Permeability Measurement of Graphene Films”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2856-2859. doi:10.18429/JACoW-IPAC2018-WEPML072
[n]	M. Kando et al., “Improvement of the Low Energy Beam Transport System at the ICR 7 MeV Proton Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-30, pp. 122-124. 
[n]	R. Moriyama et al., “Development of High Brightness Soft X-ray Source Based on Inverse Compton Scattering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH056, pp. 166-168. 
[n]	D. Manglunki, “LEIR Operations for the LHC and Future Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA01, pp. 31-35. 
[n]	P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442. 
[n]	A. Valishev, “Tevatron Accelerator Physics and Operation Highlights”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCN2, pp. 37-40. 
[n]	M. Dehn, F. Fichtner, J. Diefenbach, K. Aulenbacher, and R. Heine, “Beam diagnostics and instrumentation for MESA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4746-4748. doi:10.18429/JACoW-IPAC2023-THPL118
[n]	B. Steiner et al., “Simulation for a New Polarized Electron Injector (SPIN) for the S-DALINAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP008, pp. 1117-1119. 
[n]	C. Thomas-Madec et al., “Synchrotron Soleil Superconducting RF Status”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP48, pp. 451-453. 
[n]	Y. P. Chong, G. J. Caporaso, and K. W. Struve, “Initial Measurements of Beam Breakup Instability in the Advanced Test Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3210-3213. 
[n]	S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194. 
[n]	M. R. Masullo et al., “Approaching to a Mono-modal Accelerating Cavity based on Photonic Band-gap Concepts”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT069, pp. 1309-1311. 
[n]	M. J. Rhee and T. A. Fine, “Circuit Description of Pulsed Power Systems”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1954-1957. 
[n]	I. V. Rybakov et al., “Proposal of the Accelerating Structure for the First Cavity of the Main Part of INR Linac”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 217-219. doi:10.18429/JACoW-RUPAC2016-TUPSA004
[n]	B. G. Chidley, “Beam Transport Design Using a Thin Lens Approximation”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P07, pp. 338-342. 
[n]	D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX. 
[n]	R. Bruce, R. Alemany-Fern?índez, H. Bartosik, M. A. Jebramcik, J. M. Jowett, and M. Schaumann, “Studies for an LHC Pilot Run with Oxygen Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 53-56. doi:10.18429/JACoW-IPAC2021-MOPAB005
[n]	O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop:  A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719. 
[n]	D. Wang, J. Gao, and Y. Wang, “A New Design for ILC 3.2 km Damping Ring Based on FODO Cell”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE088, pp. 3551-3553. 
[n]	J. Muratore et al., “Test Results from the Completed Production Run of Superconducting Corrector Magnets for RHIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P007, pp. 3353-3355. 
[n]	M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n]	S. Varnasseri, J.-P. Lavieville, P. Lebasque, and A. Nadji, “Finalized Design of the Pulsed Magnets and their PS for SESAME Ring Injection”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC093, pp. 2210-2212. 
[n]	H.-J. Kwon et al., “Test Results of the PEFP 20-MeV Proton Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP041, pp. 133-135. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search