Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Zagel, M. Hu, A. Jansson, R. Thurman-Keup, and M.-J. Yang, “Complementary Methods of Transverse Emittance Measurement”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF069, pp. 282-286.
[n] A. Potylitsyn, S. Yu. Gogolev, G. Kube, W. Lauth, A. I. Novokshonov, and A. V. Vukolov, “Experimental Investigation of Spectral-Angular Cherenkov Radiation Characteristics From 855 MeV Electrons”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP36, unpublished.
[n] S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
[n] J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
[n] M. Migliorati, N. Biancacci, H. Damerau, G. Sterbini, L. Ventura, and S. Persichelli, “Measurements of the CERN PS Longitudinal Resistive Coupling Impedance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 626-629. doi:10.18429/JACoW-IPAC2016-MOPOR014
[n] S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1099-1102. doi:10.18429/JACoW-IPAC2023-MOPM047
[n] O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688.
[n] I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3147-3150. doi:10.18429/JACoW-IPAC2023-WEPL018
[n] N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
[n] H. Ferguson et al., “SRF cavity instability detection with machine learning at CEBAF”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1835-1838. doi:10.18429/JACoW-IPAC2024-TUPS69
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] E. M. Vinogradova, N. V. Egorov, and E. V. Kalaturskaja, “The Infinitely Thin Field Emitter Mathematical Modeling”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 342-344. doi:10.18429/JACoW-RUPAC2016-TUPSA064
[n] H.-C. Chao, H. Ghasem, and I. Martin, “Improvement on beam-based alignment methods by reliability weighted average technique”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 607-610. doi:10.18429/JACoW-IPAC2025-MOPS011
[n] K. Oide, “Design of Optics for the Final Focus Test Beam at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1319-1322.
[n] F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
[n] P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1647-1650.
[n] G. M. Kazakevich, H. T. Edwards, R. P. Fliller, S. Nagaitsev, J. Ruan, and R. Thurman-Keup, “Optical Transition Radiation Interferometry for the A0 Photoinjector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC047, pp. 1164-1166.
[n] D. Giove, A. Bosotti, C. Pagani, and G. Varisco, “A Wire Position Monitor (WPM) System to Control the Cold Mass Movements Inside the TTF Cryomodule”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P067, pp. 3657-3659.
[n] N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1600-1603. doi:10.18429/JACoW-IPAC2021-TUPAB095
[n] A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
[n] M. P. May and M. A. Harrison, “Lambertson Magnet Design for the Tevatron Extraction Channel”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2836-2838.
[n] M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
[n] M. Wendt et al., “Beam Instrumentation for Future High Intense Hadron Accelerator at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF02, pp. 440-449.
[n] R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
[n] M. Pachan, “Running-Up of 10 MeV Proton Linear Accelerator at Swierk”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper A-6, pp. 67-76.
[n] Y. Funakoshi et al., “KEKB Performance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH131, pp. 3546-3548.
[n] T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2406-2408. doi:10.18429/JACoW-IPAC2023-TUPM086
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
[n] H. Zhang, S. V. Benson, M. W. Bruker, and Y. Zhang, “JSPEC - A Simulation Program for IBS and Electron Cooling”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 49-52. doi:10.18429/JACoW-IPAC2021-MOPAB004
[n] P. Jiang, Y. He, and Z. J. Wang, “Mathematical Principle and Numerical Reconstruction in Real Space Measurement with a Rotating BPM”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 560-562. doi:10.18429/JACoW-LINAC2018-TUPO106
[n] S. Yunus, “Beam Transport: Routing of High Stability Laser Beams”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA169, pp. XX-XX.
[n] D. Rabusov, R. Fielder, S. Wang, and I.P.S. Martin, “Single-bunch instabilities and their mitigation in Diamond-II”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 786-789. doi:10.18429/JACoW-IPAC2024-MOPS33
[n] A. H. Lumpkin et al., “Upgrades of Beam Diagnostics in Support of Emittance-Exchange Experiments at the Fermilab A0 Photoinjector”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB01, pp. 390-393.
[n] H. Ghasem, H.-C. Chao, I. Martin, and W. Shields, “Collimator study for the Diamond-II storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1250-1253. doi:10.18429/JACoW-IPAC2024-TUPG19
[n] L. Lin, L. Jahnel, and P. Tavares, “The LNLS UVX2 Soft X-ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 450-453.
[n] C. Pagani, D. Barni, A. Bosotti, P. Pierini, and G. Ciovati, “Design Criteria for Elliptical Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper FA003, pp. XX-XX.
[n] M. Boland et al., “WaterFEL: Project Update on the New Canadian Infrared Free Electron Laser Facility”, presented at the IPAC'26, Deauville, France, May 2026, paper TUV2303, unpublished.
[n] C. Spezzani et al., “Coherent free-electron laser light with circular polarization at Fe L edge”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL034, unpublished.
[n] M. A. Makarova and E. M. Vinogradova, “The Field Cathodes with the Effect of Space Charge Modeling”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB045, pp. 415-417.
[n] Yu. N. Gavrish, A. M. Fialkovskiy, P. O. Klinovskiy, K. V. Kotenko, and V. P. Malyshev, “The X-ray System with Sub-system of Shaping of Fun-Shaped Beam and its Application in the Custom Inspection Systems”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB41, pp. 254-255.
[n] K. Saito et al., “FRIB Project: Moving to Production Phase”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOAA01, pp. 1-13.
[n] E. M. Vinogradova and A. V. Starikova, “The Multipole Lens Mathematical Modeling”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 535-537. doi:10.18429/JACoW-RUPAC2016-THPSC001
[n] R. D. Kephart et al., “SRF, Compact Accelerators for Industry & Society”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper FRBA03, pp. 1467-1473.
[n] M. Rossetti Conti et al., “Transfer line design for EuPRAXIA@SPARC_LAB”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3223-3226. doi:10.18429/JACoW-IPAC2023-WEPL048
[n] R. Modic, L. Cerne, H. Raiji, D. Sarajlic, and S. Simrock, “Unified Systems Engineering Methodology for the Design of ITER Diagnostic Systems”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper TUPDP067, unpublished.
[n] N. V. Egorov and E. M. Vinogradova, “The Multi-Tip Field Emission Cathode Mathematical Modeling”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB048, pp. 421-423.
[n] J. P. Edelen, B. Nash, and R. J. Roussel, “Magnets to ML to Light Sources: Designing from the Browser with Sirepo”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper TUZG1, unpublished.
[n] H.-C. Chao, I. Martin, and R. Fielder, “Comparison of numerical methods to determine quadrupole centres for beam based alignment”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2017, unpublished.
[n] Y. A. Svistunov, M. F. Vorogushin, A. V. Sidorov, A. M. Fialkovsky, and Y. N. Gavrish, “Advances of NPK LUTS Contraband Detection System”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP090, pp. 472-474.
[n] B. Nagler et al., “Laser Guiding of a 100 TW Laser Beam in a Capillary Discharge Waveguide”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE021, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Zagel, M. Hu, A. Jansson, R. Thurman-Keup, and M.-J. Yang, “Complementary Methods of Transverse Emittance Measurement”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF069, pp. 282-286.
- A. Potylitsyn, S. Yu. Gogolev, G. Kube, W. Lauth, A. I. Novokshonov, and A. V. Vukolov, “Experimental Investigation of Spectral-Angular Cherenkov Radiation Characteristics From 855 MeV Electrons”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP36, unpublished.
- S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
- J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
- M. Migliorati, N. Biancacci, H. Damerau, G. Sterbini, L. Ventura, and S. Persichelli, “Measurements of the CERN PS Longitudinal Resistive Coupling Impedance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 626-629.
- S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM047, pp. 1099-1102.
- O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 685-688.
- I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL018, pp. 3147-3150.
- N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
- H. Ferguson et al., “SRF cavity instability detection with machine learning at CEBAF”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS69, pp. 1835-1838.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- E. M. Vinogradova, N. V. Egorov, and E. V. Kalaturskaja, “The Infinitely Thin Field Emitter Mathematical Modeling”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 342-344.
- H.-C. Chao, H. Ghasem, and I. Martin, “Improvement on beam-based alignment methods by reliability weighted average technique”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS011, pp. 607-610.
- K. Oide, “Design of Optics for the Final Focus Test Beam at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1319-1322.
- F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
- P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1647-1650.
- G. M. Kazakevich, H. T. Edwards, R. P. Fliller, S. Nagaitsev, J. Ruan, and R. Thurman-Keup, “Optical Transition Radiation Interferometry for the A0 Photoinjector”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC047, pp. 1164-1166.
- D. Giove, A. Bosotti, C. Pagani, and G. Varisco, “A Wire Position Monitor (WPM) System to Control the Cold Mass Movements Inside the TTF Cryomodule”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P067, pp. 3657-3659.
- N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1600-1603.
- A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
- M. P. May and M. A. Harrison, “Lambertson Magnet Design for the Tevatron Extraction Channel”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2836-2838.
- M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
- M. Wendt et al., “Beam Instrumentation for Future High Intense Hadron Accelerator at Fermilab”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF02, pp. 440-449.
- R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
- M. Pachan, “Running-Up of 10 MeV Proton Linear Accelerator at Swierk”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper A-6, pp. 67-76.
- Y. Funakoshi et al., “KEKB Performance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH131, pp. 3546-3548.
- T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM086, pp. 2406-2408.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
- H. Zhang, S. V. Benson, M. W. Bruker, and Y. Zhang, “JSPEC - A Simulation Program for IBS and Electron Cooling”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 49-52.
- P. Jiang, Y. He, and Z. J. Wang, “Mathematical Principle and Numerical Reconstruction in Real Space Measurement with a Rotating BPM”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 560-562.
- S. Yunus, “Beam Transport: Routing of High Stability Laser Beams”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA169, pp. XX-XX.
- D. Rabusov, R. Fielder, S. Wang, and I.P.S. Martin, “Single-bunch instabilities and their mitigation in Diamond-II”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, pp. 786-789.
- A. H. Lumpkin et al., “Upgrades of Beam Diagnostics in Support of Emittance-Exchange Experiments at the Fermilab A0 Photoinjector”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB01, pp. 390-393.
- H. Ghasem, H.-C. Chao, I. Martin, and W. Shields, “Collimator study for the Diamond-II storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG19, pp. 1250-1253.
- L. Lin, L. Jahnel, and P. Tavares, “The LNLS UVX2 Soft X-ray Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 450-453.
- C. Pagani, D. Barni, A. Bosotti, P. Pierini, and G. Ciovati, “Design Criteria for Elliptical Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper FA003, pp. XX-XX.
- M. Boland et al., “WaterFEL: Project Update on the New Canadian Infrared Free Electron Laser Facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUV2303, this conference.
- C. Spezzani et al., “Coherent free-electron laser light with circular polarization at Fe L edge”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL034, unpublished.
- M. A. Makarova and E. M. Vinogradova, “The Field Cathodes with the Effect of Space Charge Modeling”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB045, pp. 415-417.
- Yu. N. Gavrish, A. M. Fialkovskiy, P. O. Klinovskiy, K. V. Kotenko, and V. P. Malyshev, “The X-ray System with Sub-system of Shaping of Fun-Shaped Beam and its Application in the Custom Inspection Systems”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB41, pp. 254-255.
- K. Saito et al., “FRIB Project: Moving to Production Phase”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOAA01, pp. 1-13.
- E. M. Vinogradova and A. V. Starikova, “The Multipole Lens Mathematical Modeling”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 535-537.
- R. D. Kephart et al., “SRF, Compact Accelerators for Industry & Society”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper FRBA03, pp. 1467-1473.
- M. Rossetti Conti et al., “Transfer line design for EuPRAXIA@SPARC_LAB”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL048, pp. 3223-3226.
- R. Modic, L. Cerne, H. Raiji, D. Sarajlic, and S. Simrock, “Unified Systems Engineering Methodology for the Design of ITER Diagnostic Systems”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP067, unpublished.
- N. V. Egorov and E. M. Vinogradova, “The Multi-Tip Field Emission Cathode Mathematical Modeling”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB048, pp. 421-423.
- J. P. Edelen, B. Nash, and R. J. Roussel, “Magnets to ML to Light Sources: Designing from the Browser with Sirepo”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper TUZG1, unpublished.
- H.-C. Chao, I. Martin, and R. Fielder, “Comparison of numerical methods to determine quadrupole centres for beam based alignment”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2017, this conference.
- Y. A. Svistunov, M. F. Vorogushin, A. V. Sidorov, A. M. Fialkovsky, and Y. N. Gavrish, “Advances of NPK LUTS Contraband Detection System”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP090, pp. 472-474.
- B. Nagler et al., “Laser Guiding of a 100 TW Laser Beam in a Capillary Discharge Waveguide”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE021, unpublished.
Back to search