Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Feng and K. Zhang, “A Compact Accelerator-based Light Source for High-power, Full-bandwidth Tunable Coherent THz Generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL085, unpublished.
[n] S. D. Dhole, S. Akhter, V. N. Bhoraskar, B. J. Patil, and N. S. Shinde, “Pulsed Electron Beam Current and Flux Monitor for the Race-track Microtron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA06, pp. 337-340.
[n] Y. S. Yuan, “Unified rms envelope model and the envelope instability family in high-intensity hadron synchrotrons”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB004, unpublished.
[n] J. Carwardine et al., “Commissioning of the APS Real-Time Orbit Feedback System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7PC003, pp. XX-XX.
[n] Y. Kang, C. Feng, K. Zhang, and H. Sun, “Recent progress of THz source at the SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1927-1930. doi:10.18429/JACoW-IPAC2023-TUPL080
[n] Y. Lu, G. Feng, B. Liu, Z. Ren, and C. ZHANG, “Magnet Measurements of the HALF Magnets”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7651, unpublished.
[n] A. I. Drozhdin, M. A. Kostin, and N. V. Mokhov, “Energy Deposition Issues at 8 GeV H- Beam Collimation and Injection to the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP035, pp. 2372-2374.
[n] T. Sinkovits, F. Gangini, and M. Canetti, “Challenges for Fabricating Aluminium Alloy Insertion-Device Vacuum Chambers”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA152, unpublished.
[n] A. Banerjee et al., “Parallelization of Radia Magnetostatics Code”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 481-484. doi:10.18429/JACoW-IPAC2022-MOPOTK018
[n] R. Zhang et al., “Initial Operation and Beam Characteristics of the UCLA S-Band Photo-Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3216-3219.
[n] T. Sinkovits et al., “Fabrication Processes for Low-Emittance Storage Ring Copper Vacuum Chambers”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA153, unpublished.
[n] K. Bishofberger, B. E. Carlsten, and R. Faehl, “Manipulating the Two-Stream Instability for Efficient Terahertz Generation”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP047, pp. 504-505.
[n] Y. Tian et al., “Control and assembly of complex bend magnet for proposed NSLS-II upgrade”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 933-937. doi:10.18429/JACoW-ICALEPCS2025-WEMG007
[n] J. P. Edelen, B. Nash, and R. J. Roussel, “Magnets to ML to Light Sources: Designing from the Browser with Sirepo”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper TUZG1, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Feng and K. Zhang, “A Compact Accelerator-based Light Source for High-power, Full-bandwidth Tunable Coherent THz Generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL085, unpublished.
- S. D. Dhole, S. Akhter, V. N. Bhoraskar, B. J. Patil, and N. S. Shinde, “Pulsed Electron Beam Current and Flux Monitor for the Race-track Microtron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA06, pp. 337-340.
- Y. S. Yuan, “Unified rms envelope model and the envelope instability family in high-intensity hadron synchrotrons”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB004, unpublished.
- J. Carwardine et al., “Commissioning of the APS Real-Time Orbit Feedback System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7PC003, pp. XX-XX.
- Y. Kang, C. Feng, K. Zhang, and H. Sun, “Recent progress of THz source at the SXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL080, pp. 1927-1930.
- Y. Lu, G. Feng, B. Liu, Z. Ren, and C. ZHANG, “Magnet Measurements of the HALF Magnets”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7651, this conference.
- A. I. Drozhdin, M. A. Kostin, and N. V. Mokhov, “Energy Deposition Issues at 8 GeV H- Beam Collimation and Injection to the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP035, pp. 2372-2374.
- T. Sinkovits, F. Gangini, and M. Canetti, “Challenges for Fabricating Aluminium Alloy Insertion-Device Vacuum Chambers”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA152, unpublished.
- A. Banerjee et al., “Parallelization of Radia Magnetostatics Code”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 481-484.
- R. Zhang et al., “Initial Operation and Beam Characteristics of the UCLA S-Band Photo-Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3216-3219.
- T. Sinkovits et al., “Fabrication Processes for Low-Emittance Storage Ring Copper Vacuum Chambers”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA153, unpublished.
- K. Bishofberger, B. E. Carlsten, and R. Faehl, “Manipulating the Two-Stream Instability for Efficient Terahertz Generation”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP047, pp. 504-505.
- Y. Tian et al., “Control and assembly of complex bend magnet for proposed NSLS-II upgrade”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 933-937.
- J. P. Edelen, B. Nash, and R. J. Roussel, “Magnets to ML to Light Sources: Designing from the Browser with Sirepo”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper TUZG1, unpublished.
Back to search