Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Petenev, T. Atkinson, A. V. Bondarenko, and A. N. Matveenko, “Multi-turn ERL Based Light Source: Analysis of Injection and Recovery Schemes”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA004, pp. 2129-2131.
[n] G. A. Krafft et al., “Coherent Synchrotron Radiation Detector for a Non-Invasive Subpicosecond Bunch Length Monitor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC04, pp. 2601-2603.
[n] M. A. G. Johansson, Y. Cai, and V. Yakimenko, “SLAC FACET-II Positron Damping Ring Magnet Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1154-1156. doi:10.18429/JACoW-IPAC2016-TUPMB021
[n] T. Higo, H. Sakai, Y. Higashi, T. Takatomi, and S. Koike, “Precise Fabrication of X-Band Detuned Accelerating Structure for Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ15, pp. 1753-1755.
[n] D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
[n] G. D'Auria, A. Fabris, C. Pasotti, V. Rizzi, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA RF System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1185-1188.
[n] F. A. Laham, G. H. Hoffstaetter, C. E. Mayes, and J. R. Thompson, “An Extension of Cornell's Energy Recovery Linac for Compressed High-charge Bunches”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA072, pp. 2651-2653.
[n] A. V. Shemyakin et al., “Status of the Warm Front End of PIP-II Injector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2421-2424. doi:10.18429/JACoW-IPAC2017-TUPVA138
[n] F. Lackner et al., “Improvements of the SPS slow extraction electrostatic septum”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1176-1179. doi:10.18429/JACoW-IPAC2024-TUPC72
[n] J. Andersson, F. Curbis, M. Kotur, F. Lindau, S. Thorin, and S. Werin, “Emittance Improvements in the MAX IV Photocathode Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1533-1536. doi:10.18429/JACoW-IPAC2017-TUPAB094
[n] R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
[n] J. S. Diamond and K. S. Martin, “Managing a Real-time Embedded Linux Platform with Buildroot”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 926-929. doi:10.18429/JACoW-ICALEPCS2015-WEPGF096
[n] S. Kurennoy and Y. Batygin, “Electromagnetic and beam dynamics modeling of the LANSCE coupled-cavity linac with CST studio”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2209-2211. doi:10.18429/JACoW-IPAC2023-TUPM008
[n] C. Arnaud et al., “CERN's Technology for Superconducting Cavities in European Industry”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1275-1277.
[n] W. S. Chan, J.-C. Chang, and T. Y. Hsieh, “Numerical analysis on a modified air conditioning system of the experimental hall at TPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3861-3863. doi:10.18429/JACoW-IPAC2024-THPS53
[n] H. S. Kim, Y.-S. Cho, H.-J. Kwon, and K. T. Seol, “RF Characteristics of the PEFP DTL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH134, pp. 1331-1333.
[n] C. Xu, B. Dehning, F. S. Domingues Sousa, and E. Griesmayer, “Diamond Monitor Based Beam Loss Measurements in the LHC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 82-85. doi:10.18429/JACoW-IBIC2016-MOPG19
[n] T. Hattori, E. Arai, Y. Oguri, K. Sato, and H. Suzuki, “Construction and Acceleration Characteristics of the Tokyo Institute of Technology Heavy Ion Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-50, pp. 377-379.
[n] J. C. Brutus et al., “Update on the CeC POP 704 MHz 5-Cell Cavity Cryomodule Design and Fabrication”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3603-3605. doi:10.18429/JACoW-IPAC2015-WEPWI051
[n] H. Ikeda, T. Mimashi, S. Nakamura, T. Oki, and S. Sasaki, “Fast Trigger System for Beam Abort System in SuperKEKB”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 754-756. doi:10.18429/JACoW-IPAC2022-MOPOMS048
[n] V. Ovchar, E. Kuper, and G.-J. Coelingh, “ARC DETECTOR SYSTEM FOR EXTRACTION SWITCHES IN LHC CERN”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MODP24, pp. XX-XX.
[n] A. Grudiev et al., “Design and Fabrication of CLIC Test Structures”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP057, pp. 533-535.
[n] K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Petenev, T. Atkinson, A. V. Bondarenko, and A. N. Matveenko, “Multi-turn ERL Based Light Source: Analysis of Injection and Recovery Schemes”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA004, pp. 2129-2131.
- G. A. Krafft et al., “Coherent Synchrotron Radiation Detector for a Non-Invasive Subpicosecond Bunch Length Monitor”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC04, pp. 2601-2603.
- M. A. G. Johansson, Y. Cai, and V. Yakimenko, “SLAC FACET-II Positron Damping Ring Magnet Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1154-1156.
- T. Higo, H. Sakai, Y. Higashi, T. Takatomi, and S. Koike, “Precise Fabrication of X-Band Detuned Accelerating Structure for Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ15, pp. 1753-1755.
- D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
- G. D'Auria, A. Fabris, C. Pasotti, V. Rizzi, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA RF System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1185-1188.
- F. A. Laham, G. H. Hoffstaetter, C. E. Mayes, and J. R. Thompson, “An Extension of Cornell's Energy Recovery Linac for Compressed High-charge Bunches”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA072, pp. 2651-2653.
- A. V. Shemyakin et al., “Status of the Warm Front End of PIP-II Injector Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2421-2424.
- F. Lackner et al., “Improvements of the SPS slow extraction electrostatic septum”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC72, pp. 1176-1179.
- J. Andersson, F. Curbis, M. Kotur, F. Lindau, S. Thorin, and S. Werin, “Emittance Improvements in the MAX IV Photocathode Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1533-1536.
- R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
- J. S. Diamond and K. S. Martin, “Managing a Real-time Embedded Linux Platform with Buildroot”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 926-929.
- S. Kurennoy and Y. Batygin, “Electromagnetic and beam dynamics modeling of the LANSCE coupled-cavity linac with CST studio”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM008, pp. 2209-2211.
- C. Arnaud et al., “CERN's Technology for Superconducting Cavities in European Industry”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1275-1277.
- W. S. Chan, J.-C. Chang, and T. Y. Hsieh, “Numerical analysis on a modified air conditioning system of the experimental hall at TPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS53, pp. 3861-3863.
- H. S. Kim, Y.-S. Cho, H.-J. Kwon, and K. T. Seol, “RF Characteristics of the PEFP DTL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH134, pp. 1331-1333.
- C. Xu, B. Dehning, F. S. Domingues Sousa, and E. Griesmayer, “Diamond Monitor Based Beam Loss Measurements in the LHC”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 82-85.
- T. Hattori, E. Arai, Y. Oguri, K. Sato, and H. Suzuki, “Construction and Acceleration Characteristics of the Tokyo Institute of Technology Heavy Ion Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-50, pp. 377-379.
- J. C. Brutus et al., “Update on the CeC POP 704 MHz 5-Cell Cavity Cryomodule Design and Fabrication”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3603-3605.
- H. Ikeda, T. Mimashi, S. Nakamura, T. Oki, and S. Sasaki, “Fast Trigger System for Beam Abort System in SuperKEKB”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 754-756.
- V. Ovchar, E. Kuper, and G.-J. Coelingh, “ARC DETECTOR SYSTEM FOR EXTRACTION SWITCHES IN LHC CERN”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MODP24, pp. XX-XX.
- A. Grudiev et al., “Design and Fabrication of CLIC Test Structures”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP057, pp. 533-535.
- K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
Back to search