JaCoW Logo

Reference Search

Favourites


For Word

[n]	P. Khodadoost, J. Dehghani, V. Moradi, M. Hashemi, A. Danaeifard, and Z. Azizi, “Girder and support system for the Iranian Light Source Facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM005, unpublished. 
[n]	V. Alexandrov, A. P. Sumbaev, N. Y. Kazarinov, and V. F. Shevtsov, “Calculation of Electron Beam Dynamics of the LUE-200 Accelerator”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP21, pp. 639-641. 
[n]	R. Monroy-Villa et al., “Commissioning of the UHH Quadrupole Resonator at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 952-959. doi:10.18429/JACoW-SRF2023-THCAA02
[n]	J. G. Power, M. Borland, G. Decker, N. Sereno, K.-J. Kim, and X. W. Dong, “Potential for an Ultra-low Emittance Thermionic Triode Gun”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP109, pp. 989-991. 
[n]	J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4352-4354. doi:10.18429/JACoW-IPAC2021-THPAB282
[n]	M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3552-3555. doi:10.18429/JACoW-IPAC2024-THPR28
[n]	A. Halavanau et al., “LCLS Multi-Bunch Improvement Plan”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 365-368. doi:10.18429/JACoW-IPAC2021-MOPAB098
[n]	T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 72-77. doi:10.18429/JACoW-ECRIS2020-TUXZO03
[n]	A. Ate, H. Hähnel, A. Michel, U. Ratzinger, and C. Wagner, “Raspberry Pi cameras as beam induced fluorescence monitors for low and high energy beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4692-4695. doi:10.18429/JACoW-IPAC2023-THPL100
[n]	D. E. Anderson, “Recent Developments in Pulsed High-Power Systems”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH2003, pp. 541-545. 
[n]	J. Keintzel, L. Malina, and R. Tom?ís Garc?¡a, “Momentum Compaction Factor Measurements in the Large Hadron Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1360-1363. doi:10.18429/JACoW-IPAC2021-TUPAB011
[n]	A. Vannozzi, D. Alesini, A. Giribono, and C. Vaccarezza, “Design and Realization of New Solenoids for High Brightness Electron Beam Injectors”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2374-2377. doi:10.18429/JACoW-IPAC2021-TUPAB366
[n]	R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 784-787. doi:10.18429/JACoW-IPAC2023-MOPL097
[n]	Y. He, Z. J. Wang, C. Xiao, W. Wu, and Y. Q. Yang, “The Optimization Design and Tolerance Analysis of DTL in SSC-INAC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP064, pp. 557-559. 
[n]	A. M. Hoover, A. V. Aleksandrov, S. M. Cousineau, K. J. Ruisard, A. P. Shishlo, and A. P. Zhukov, “The Impact of High-Dimensional Phase Space Correlations on the Beam Dynamics in a Linear Accelerator”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 68-72. doi:10.18429/JACoW-HB2023-TUC1C2
[n]	Y. Chung et al., “Beam Position Monitor Data Acquisition for the Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1814-1817. 
[n]	B. Dalena and M. Ben Ghali, “A Machine Learning Technique for Dynamic Aperture Computation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4172-4175. doi:10.18429/JACoW-IPAC2021-THPAB201
[n]	J. R. Ocampo, B. Bravo, F. P?®rez, A. Salom, P. Solans, and J. M. ?ülvarez, “Prototype Fabrication of an Active Normal Conducting Third Harmonic Cavity for the ALBA Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1542-1545. doi:10.18429/JACoW-IPAC2022-TUPOMS051
[n]	J. Resta-Lopez, A. Foussat, C. Welsch, G. Kirby, I. Martel, and V. Rodin, “Design of a compact superconducting recoil separator for HIE-ISOLDE”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1450-1453. doi:10.18429/JACoW-IPAC2023-TUPA050
[n]	Z. Shao, Z. Dong, T. Zhang, S. Dong, L. Wang, and Y. Lu, “Development progress of a tunable terahertz free electron laser based on a pre-bunched linear accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 438-440. doi:10.18429/JACoW-IPAC2024-MOPG74
[n]	G. Le Bec, “A Fast Non-Linear Model for the EBS Combined Sextupole-Corrector Magnets”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2381-2383. doi:10.18429/JACoW-IPAC2021-TUPAB369
[n]	G. Geloni, M. Guetg, E. Schneidmiller, and S. Serkez, “Revision of optical klystron enhancement effects in self-amplified spontaneous emission free-electron lasers”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1849-1851. doi:10.18429/JACoW-IPAC2023-TUPL041
[n]	N. Pietralla, R. Eichhorn, M. Konrad, U. Bonnes, and C. Burandt, “A Digital Low Level RF Control System for the S-DALINAC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP091, pp. 268-270. 
[n]	P. Chen, “Disruption Effects from the Collision of Quasi-Flat Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 617-620. 
[n]	M. D'Andrea et al., “Crystal collimation performance at the LHC with a 6.8 TeV proton beam”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 563-566. doi:10.18429/JACoW-IPAC2023-MOPL023
[n]	J. W. Lewellen and YL. Li, “Generation of Ellipsoidal Beam Through 3-D Pulse Shaping of a Photoinjector Drive Laser”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP083, pp. 776-778. 
[n]	M. A. Kemp, D. E. Anderson, C. Burkhart, and M. N. Nguyen, “Next Generation IGBT Switch Plate Development for the SNS High Voltage Converter Modulator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP096, pp. 1012-1014. 
[n]	A. M. Hoover, A. V. Aleksandrov, S. M. Cousineau, K. J. Ruisard, and A. P. Zhukov, “Measurements of the Five-Dimensional Phase Space Distribution of an Intense Ion Beam”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 910-913. doi:10.18429/JACoW-NAPAC2022-FRXD3
[n]	R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 645-649. doi:10.18429/JACoW-LINAC2022-WE2AA02
[n]	Y. W. An, L. Huang, Z. P. Li, S. Y. Xu, and Y. S. Yuan, “Resonance Extraction Research Based on China Spallation Neutron Source”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 397-399. doi:10.18429/JACoW-HB2023-THAFP02
[n]	U. Ratzinger, S. Minaev, and C. A. Kitegi, “The IH Cavity for HITRAP”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP10, pp. 54-56. 
[n]	K. J. Ruisard, A. V. Aleksandrov, S. M. Cousineau, A. M. Hoover, and A. P. Zhukov, “Model/Measurement Comparison of the Transverse Phase Space Distribution of an RFQ-Generated Bunch at the SNS BTF”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 584-587. doi:10.18429/JACoW-NAPAC2022-WEYE5
[n]	C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246. 
[n]	Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3816-3818. doi:10.18429/JACoW-IPAC2024-THPS36
[n]	L. Gupta, A. L. Edelen, Y. K. Kim, C. E. Mayes, A. A. Mishra, and N. R. Neveu, “Measurement-Based Surrogate Model of the SLAC LCLS-II Injector”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3395-3398. doi:10.18429/JACoW-IPAC2021-WEPAB308
[n]	D. J. Holder, “First Results from the ERL Prototype (ALICE) at Daresbury”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper WE103, pp. 694-698. 
[n]	L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA085, unpublished. 
[n]	A. K. Orduz et al., “SPIRAL2 Final Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 314-318. doi:10.18429/JACoW-LINAC2022-TU2AA02
[n]	H. M. Churn, C. Benjamin, L. B. Jones, and T. C. Q. Noakes, “The Alkali-Metal Photocathode Preparation Facility at Daresbury Laboratory: First Caesium Telluride Deposition Results”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2693-2696. doi:10.18429/JACoW-IPAC2022-THPOPT044
[n]	A. M. Lombardi, E. Zh. Sargsyan, R. Scrivens, V. Coco, and J. A. Chamings, “Acceleration of Several Charge States of Lead Ion in CERN LINAC3”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP27, pp. 351-353. 
[n]	S. Candela et al., “Laser powder bed fusion of pure niobium for particle accelerator applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4935-4938. doi:10.18429/JACoW-IPAC2023-THPM021
[n]	H. Sun, B. Liu, and C. Feng, “High-gain free-electron laser with orbital angular momentum seeded by an x-ray regenerative amplifier”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1931-1934. doi:10.18429/JACoW-IPAC2023-TUPL081
[n]	A. Oeftiger and O. Boine-Frankenheim, “Space-charge Limits and Possible Mitigation Approaches in the FAIR Synchrotrons”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper MOA4I2, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search