Favourites
For Word
[n] E. E. Ergenlik, C. Bruni, A. Gamelin, D. Le Guidec, and P. Lepercq, “Transverse Impedance Coaxial Wire Measurement in an Extended Frequency Range”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4227-4230. doi:10.18429/JACoW-IPAC2021-THPAB222
[n] B. Laune et al., “Injection from the K500 Superconducting Cyclotron into the 88 Cyclotron at Texas A&M"”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2111-2114.
[n] E. Zaidman, D. C. Barnes, K. Mima, D. Neuffer, T. Ohsuga, and T. Tajima, “Study of the Plasma Fiber Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3545-3548.
[n] M. Schaumann, M. Juchno, M. Lamont, M. Solfaroli Camillocci, E. Todesco, and J. Wenninger, “Tune and Chromaticity Control During Snapback and Ramp in 2015 LHC Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1501-1504. doi:10.18429/JACoW-IPAC2016-TUPMW029
[n] G. D'Auria, J. Gonichon, and T. Manfroi, “Preliminary Design for a Thermionic R.F. Gun”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1978-1981.
[n] V. V. Paramonov, L. V. Kravchuk, A. S. Levchenko, T. Kato, F. Naito, and Y. Yamazaki, “The Bridge Coupling Cavities in the Separated Drift Tube Linac Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4078, pp. 582-584.
[n] J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Measurement of Field Inaccuracy and Shim Simulation of a 130-Pole Superconducting Undolator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB021, pp. 322-324.
[n] E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
[n] N. Kuklev, I. Lobach, H. Shang, and R. Soliday, “Upgrades to logging and ml analytics architecture at APS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4432-4435. doi:10.18429/JACoW-IPAC2023-THPL008
[n] G. R. Murdoch, D. W. Crisp, M. Holding, P. Ladd, K. G. Potter, and R. T. Roseberry, “Review of the Mechanical Engineering Challenges Associated with the SNS Power Ramp Up”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD034, pp. 1500-1502.
[n] M. Borland, R. R. Lindberg, R. Soliday, and A. Xiao, “Tools for Use of Generalized Gradient Expansions in Accelerator Simulations”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 253-256. doi:10.18429/JACoW-IPAC2021-MOPAB059
[n] S. P. Chia, S. P. Moo, and D. A. Bradley, “Accelerator-Related Research Activities in Malaysia”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4B002, pp. 28-31.
[n] J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2346-2348. doi:10.18429/JACoW-IPAC2021-TUPAB357
[n] N. Ohuchi et al., “Status of LHC Low-Beta Quadrupole Magnets, MQXA, at KEK”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE019, pp. 1978-1980.
[n] E. Prebys, R. J. Abergel, W. H. Casey, and D. A. Cebra, “Development of 211-Astatine Production in the Crocker Nuclear Laboratory Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3564-3567. doi:10.18429/JACoW-IPAC2019-THPMP051
[n] B. Kuske, G. Isoyama, H. Lehr, and G. Wuestefeld, “Layout of the BESSY II Lattice”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1420-1423.
[n] R. Bakker, T. Birke, B. Kuske, R. Lange, and R. Mueller, “Experiences with Commissioning Software Tools at BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP49, pp. 2382-2384.
[n] A. Yamamoto et al., “Development of LHC Low-β Quadrupole Magnets at KEK”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH313, pp. 3633-3635.
[n] V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 994-997.
[n] C. J. Yao and H. J. Chang, “The INR 30 MeV(p) Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-09, pp. 65-67.
[n] J. van de Walle et al., “Dosimetry of Pulsed Beams in Proton Therapy”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF08, pp. 548-552.
[n] E. S. Masunov, D. A. Efimov, and P. N. Ostroumov, “RF Focusing of Low-Charge-to-Mass-Ratio Heavy-Ions in a Superconducting Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT111, pp. 1405-1407.
[n] C. Sun, J. De Chant, and C. Steier, “OTR beam profile monitor at ALS/ALS-U”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 566-570. doi:10.18429/JACoW-IBIC2025-TUPMO40
[n] G. R. Murdoch, D. Crisp, S. Henderson, M. Holding, K. Potter, and T. Roseberry, “Design amp; Handling of High Activity Collimators amp;Ring Components on the SNS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT172, pp. 2233-2235.
[n] J. L. Bol, A. Chevalier, Y. Jongen, M. Lacroix, F. Mathy, and G. Ryckewaert, “Operation Experience with the CYCLONE-OCTOPUS Combination”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-16, pp. 90-93.
[n] Y. Li et al., “Application of Programmable Trim Quadrupoles in Beam Commissioning of CSNS/RCS”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 158-161. doi:10.18429/JACoW-HB2023-TUA4C2
For LaTeX
Use Complete Form
For BibTeX
References
- E. E. Ergenlik, C. Bruni, A. Gamelin, D. Le Guidec, and P. Lepercq, “Transverse Impedance Coaxial Wire Measurement in an Extended Frequency Range”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4227-4230.
- B. Laune et al., “Injection from the K500 Superconducting Cyclotron into the 88 Cyclotron at Texas A&M"”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2111-2114.
- E. Zaidman, D. C. Barnes, K. Mima, D. Neuffer, T. Ohsuga, and T. Tajima, “Study of the Plasma Fiber Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3545-3548.
- M. Schaumann, M. Juchno, M. Lamont, M. Solfaroli Camillocci, E. Todesco, and J. Wenninger, “Tune and Chromaticity Control During Snapback and Ramp in 2015 LHC Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1501-1504.
- G. D'Auria, J. Gonichon, and T. Manfroi, “Preliminary Design for a Thermionic R.F. Gun”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1978-1981.
- V. V. Paramonov, L. V. Kravchuk, A. S. Levchenko, T. Kato, F. Naito, and Y. Yamazaki, “The Bridge Coupling Cavities in the Separated Drift Tube Linac Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4078, pp. 582-584.
- J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Measurement of Field Inaccuracy and Shim Simulation of a 130-Pole Superconducting Undolator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB021, pp. 322-324.
- E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
- N. Kuklev, I. Lobach, H. Shang, and R. Soliday, “Upgrades to logging and ml analytics architecture at APS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL008, pp. 4432-4435.
- G. R. Murdoch, D. W. Crisp, M. Holding, P. Ladd, K. G. Potter, and R. T. Roseberry, “Review of the Mechanical Engineering Challenges Associated with the SNS Power Ramp Up”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD034, pp. 1500-1502.
- M. Borland, R. R. Lindberg, R. Soliday, and A. Xiao, “Tools for Use of Generalized Gradient Expansions in Accelerator Simulations”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 253-256.
- S. P. Chia, S. P. Moo, and D. A. Bradley, “Accelerator-Related Research Activities in Malaysia”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4B002, pp. 28-31.
- J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2346-2348.
- N. Ohuchi et al., “Status of LHC Low-Beta Quadrupole Magnets, MQXA, at KEK”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE019, pp. 1978-1980.
- E. Prebys, R. J. Abergel, W. H. Casey, and D. A. Cebra, “Development of 211-Astatine Production in the Crocker Nuclear Laboratory Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3564-3567.
- B. Kuske, G. Isoyama, H. Lehr, and G. Wuestefeld, “Layout of the BESSY II Lattice”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1420-1423.
- R. Bakker, T. Birke, B. Kuske, R. Lange, and R. Mueller, “Experiences with Commissioning Software Tools at BESSY II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP49, pp. 2382-2384.
- A. Yamamoto et al., “Development of LHC Low-β Quadrupole Magnets at KEK”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH313, pp. 3633-3635.
- V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 994-997.
- C. J. Yao and H. J. Chang, “The INR 30 MeV(p) Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-09, pp. 65-67.
- J. van de Walle et al., “Dosimetry of Pulsed Beams in Proton Therapy”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF08, pp. 548-552.
- E. S. Masunov, D. A. Efimov, and P. N. Ostroumov, “RF Focusing of Low-Charge-to-Mass-Ratio Heavy-Ions in a Superconducting Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT111, pp. 1405-1407.
- C. Sun, J. De Chant, and C. Steier, “OTR beam profile monitor at ALS/ALS-U”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 566-570.
- G. R. Murdoch, D. Crisp, S. Henderson, M. Holding, K. Potter, and T. Roseberry, “Design amp; Handling of High Activity Collimators amp;Ring Components on the SNS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT172, pp. 2233-2235.
- J. L. Bol, A. Chevalier, Y. Jongen, M. Lacroix, F. Mathy, and G. Ryckewaert, “Operation Experience with the CYCLONE-OCTOPUS Combination”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-16, pp. 90-93.
- Y. Li et al., “Application of Programmable Trim Quadrupoles in Beam Commissioning of CSNS/RCS”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA4C2, pp. 158-161.
Back to search