Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. E. Laxdal and W. Joho, “Longitudinal Splitting of Bunches in a Cyclotron by Superposition of Different RF Harmonics”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 590-593.
[n] I. V. Bazarov, G. A. Krafft, and L. Merminga, “Linac Optics for Energy Recovery Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH053, pp. 3347-3349.
[n] B. Singh, A. Ramezani Moghaddam, and I. Martin, “Further investigations into the impacts of insertion devices on the Diamond-II lattice”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1258-1261. doi:10.18429/JACoW-IPAC2024-TUPG21
[n] D. Ji, Z. Duan, S. K. Tian, and Y. Wei, “Study of HEPS Performance with Error Model and Simulated Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 721-723. doi:10.18429/JACoW-IPAC2017-MOPIK081
[n] C. Yao, W. E. Norum, and J. Wang, “An FPGA-based Tune Measurement System for the APS Booster Synchrotron”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF078, pp. 303-306.
[n] J. C. Brutus, B. Xiao, D. Holmes, S. De Silva, and Z. Conway, “Mechanical design and 3-D coupled RF, thermal-structural analysis of the quarter wave stub for 197 MHz crab cavity”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC70, unpublished.
[n] R. Matsushita et al., “Development of Pulsed Beam System for the Three Dimensional Spiral Injection Scheme in the J-PARC muon g-2/EDM Experiment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 809-812. doi:10.18429/JACoW-IPAC2021-MOPAB256
[n] H. Zhongxi, “High Brightness Injector for FEL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 605-608.
[n] F. Mingwu, “Accelerator Research & Development Activities at CIAE”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5B001, pp. 337-341.
[n] A. S. Setty, A. S. Chauchat, D. Fasse, and D. Jousse, “A New Timing System and Electron Gun Modulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI003, pp. 2705-2707.
[n] S. An, “Upgrade the Control System of HIRFL Based-on EPICS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA006, pp. XX-XX.
[n] A. R. Oguz, W. Blokland, and N. J. Evans, “Two-Dimensional Temperature Measurements of Nanocrystalline Diamond Stripper Foils at High Intensity Hydrogen Ion Beams at SNS”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEC2C2, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- R. E. Laxdal and W. Joho, “Longitudinal Splitting of Bunches in a Cyclotron by Superposition of Different RF Harmonics”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 590-593.
- I. V. Bazarov, G. A. Krafft, and L. Merminga, “Linac Optics for Energy Recovery Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH053, pp. 3347-3349.
- B. Singh, A. Ramezani Moghaddam, and I. Martin, “Further investigations into the impacts of insertion devices on the Diamond-II lattice”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG21, pp. 1258-1261.
- D. Ji, Z. Duan, S. K. Tian, and Y. Wei, “Study of HEPS Performance with Error Model and Simulated Correction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 721-723.
- C. Yao, W. E. Norum, and J. Wang, “An FPGA-based Tune Measurement System for the APS Booster Synchrotron”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF078, pp. 303-306.
- J. C. Brutus, B. Xiao, D. Holmes, S. De Silva, and Z. Conway, “Mechanical design and 3-D coupled RF, thermal-structural analysis of the quarter wave stub for 197 MHz crab cavity”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC70, unpublished.
- R. Matsushita et al., “Development of Pulsed Beam System for the Three Dimensional Spiral Injection Scheme in the J-PARC muon g-2/EDM Experiment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 809-812.
- H. Zhongxi, “High Brightness Injector for FEL”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 605-608.
- F. Mingwu, “Accelerator Research & Development Activities at CIAE”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5B001, pp. 337-341.
- A. S. Setty, A. S. Chauchat, D. Fasse, and D. Jousse, “A New Timing System and Electron Gun Modulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI003, pp. 2705-2707.
- S. An, “Upgrade the Control System of HIRFL Based-on EPICS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA006, pp. XX-XX.
- A. R. Oguz, W. Blokland, and N. J. Evans, “Two-Dimensional Temperature Measurements of Nanocrystalline Diamond Stripper Foils at High Intensity Hydrogen Ion Beams at SNS”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC2C2, unpublished.
Back to search