Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Rank et al., “Design Considerations for a Lambertson Septum Magnet for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB050, pp. 2150-2152.
[n] H. C. Fernandes et al., “Ultra-high Vacuum Seal for Long Chambers using Wire Seals”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC09, pp. 1157-1159.
[n] A. V. Savilov, I. V. Bandurkin, Yu. S. Oparina, and N. Yu. Peskov, “Regime of Multi-Stage Non-Resonant Trapping in Free Electron Lasers”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 83-86. doi:10.18429/JACoW-FEL2019-TUP019
[n] E. D. Vovchenko, K. I. Kozlovskii, S. M. Polozov, and A. E. Shikanov, “Investigation of a Laser Ion Source with Magnetic Contraction of a Plasma Flow”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB42, unpublished.
[n] G. Devanz et al., “Progress in IFMIF Half Wave Resonators Manufacturing and Test Preparation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB045, pp. 1191-1195.
[n] A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
[n] C. Kim, K. Hyun, I. S. Ko, Y. W. Parc, J. Park, and C. Yim, “Laser Pulse Shaping for Generation of Low-Emittance Electron-Beam”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH019, pp. 278-281.
[n] M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
[n] L. Teofili, D. Carbajo Perez, I. Lamas Garcia, M. Migliorati, and A. Perillo, “Design of the Target Dump Injection Segmented (TDIS) in the Framework of the High Luminosity Large Hadron Collider (HL-LHC) Project”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 122-126. doi:10.18429/JACoW-HB2018-TUP2WE04
[n] A. V. Savilov, I. V. Bandurkin, and S. V. Kuzikov, “Cyclotron-Undulator Cooling of a Free-Electron-Laser Beam”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP014, pp. 710-713.
[n] C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT06, pp. XX-XX.
[n] M. Musardo et al., “A Quasi-Periodic Elliptically Polarized Undulator at the National Synchrotron Light Source II”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 88-91. doi:10.18429/JACoW-MEDSI2018-TUPH26
[n] S. V. Kuzikov, I. V. Bandurkin, M. E. Plotkin, A. V. Savilov, and A. A. Vikharev, “Terahertz FEL based on Photoinjector Beam in RF Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP046, pp. 485-488.
[n] M. Felber et al., “New MTCA.4-based Hardware Developments for the Control of the Optical Synchronization Systems at DESY”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD07, pp. 152-156.
[n] I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124.
[n] B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3083-3086. doi:10.18429/JACoW-IPAC2018-THPAF052
[n] E. Magori, N. Balal, and V. Bratman, “Helical undulators of magnetized helices and ring sectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1775-1777. doi:10.18429/JACoW-IPAC2023-TUPL002
[n] C. N. Booth, P. Hodgson, R. Nicholson, and P. J. Smith, “MICE Target Operation & Monitoring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP040, pp. 2881-2883.
[n] C. Lechner et al., “Measurements of the Timing Stability at the FLASH1 Seeding Experiment”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP076, pp. 913-916.
[n] A. V. Savilov and I. V. Bandurkin, “THz Photo-Injector FEM Based on Spontaneous Coherent Emission from a Bunch of Negative-Mass Electrons”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 317-320. doi:10.18429/JACoW-FEL2015-TUP001
[n] A. Nause, A. Friedman, A. Haj Yahya, A. Weinberg, L. Feigin, and E. Magori, “First light at the Israeli superradiant THz free electron laser”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL003, unpublished.
[n] A. G. Gagnaire, Ch. Serre, C. H. Sicard, and N. de Metz-Noblat, “Replacing PS Controls Front End Minicomputers by VME Based 32-bit Processors”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 375-377. doi:10.18429/JACoW-ICALEPCS1991-S11LLC01
[n] K. Fuchsberger and G. H. Hemelsoet, “LHC Online Chromaticity Measurement - Experience After One Year of Operation”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 20-23. doi:10.18429/JACoW-IBIC2016-MOBL04
[n] A. Calia, K. Fuchsberger, G. H. Hemelsoet, and D. Jacquet, “Development of a New System for Detailed LHC Filling Diagnostics and Statistics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1905-1907. doi:10.18429/JACoW-IPAC2017-TUPIK088
[n] K. Fuchsberger et al., “Phase Advance Interlocking Throughout the Whole LHC Cycle”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1901-1904. doi:10.18429/JACoW-IPAC2017-TUPIK087
[n] E. Bamberg, E. Magori, N. Balal, and V. Bratman, “Permanent helical undulators with strong fields”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1180-1183. doi:10.18429/JACoW-IPAC2023-MOPM087
[n] C. Crawford et al., “Prototype "Electron Lens" Set-up for the Tevatron Beam-Beam Compensation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCR5, pp. 237-239.
[n] R. Rausch and Ch. Serre, “Common Control System for the CERN Accelerators”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 54-58. doi:10.18429/JACoW-ICALEPCS1991-S02SRU02
[n] S. V. Kuzikov, I. V. Bandurkin, and A. V. Savilov, “Cyclotron-Undulator Cooling of Electron Beams”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP084, pp. 1041-1043.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Rank et al., “Design Considerations for a Lambertson Septum Magnet for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB050, pp. 2150-2152.
- H. C. Fernandes et al., “Ultra-high Vacuum Seal for Long Chambers using Wire Seals”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC09, pp. 1157-1159.
- A. V. Savilov, I. V. Bandurkin, Yu. S. Oparina, and N. Yu. Peskov, “Regime of Multi-Stage Non-Resonant Trapping in Free Electron Lasers”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 83-86.
- E. D. Vovchenko, K. I. Kozlovskii, S. M. Polozov, and A. E. Shikanov, “Investigation of a Laser Ion Source with Magnetic Contraction of a Plasma Flow”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB42, unpublished.
- G. Devanz et al., “Progress in IFMIF Half Wave Resonators Manufacturing and Test Preparation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB045, pp. 1191-1195.
- A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
- C. Kim, K. Hyun, I. S. Ko, Y. W. Parc, J. Park, and C. Yim, “Laser Pulse Shaping for Generation of Low-Emittance Electron-Beam”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH019, pp. 278-281.
- M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
- L. Teofili, D. Carbajo Perez, I. Lamas Garcia, M. Migliorati, and A. Perillo, “Design of the Target Dump Injection Segmented (TDIS) in the Framework of the High Luminosity Large Hadron Collider (HL-LHC) Project”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 122-126.
- A. V. Savilov, I. V. Bandurkin, and S. V. Kuzikov, “Cyclotron-Undulator Cooling of a Free-Electron-Laser Beam”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP014, pp. 710-713.
- C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT06, pp. XX-XX.
- M. Musardo et al., “A Quasi-Periodic Elliptically Polarized Undulator at the National Synchrotron Light Source II”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 88-91.
- S. V. Kuzikov, I. V. Bandurkin, M. E. Plotkin, A. V. Savilov, and A. A. Vikharev, “Terahertz FEL based on Photoinjector Beam in RF Undulator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP046, pp. 485-488.
- M. Felber et al., “New MTCA.4-based Hardware Developments for the Control of the Optical Synchronization Systems at DESY”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD07, pp. 152-156.
- I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124.
- B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3083-3086.
- E. Magori, N. Balal, and V. Bratman, “Helical undulators of magnetized helices and ring sectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL002, pp. 1775-1777.
- C. N. Booth, P. Hodgson, R. Nicholson, and P. J. Smith, “MICE Target Operation & Monitoring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP040, pp. 2881-2883.
- C. Lechner et al., “Measurements of the Timing Stability at the FLASH1 Seeding Experiment”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP076, pp. 913-916.
- A. V. Savilov and I. V. Bandurkin, “THz Photo-Injector FEM Based on Spontaneous Coherent Emission from a Bunch of Negative-Mass Electrons”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 317-320.
- A. Nause, A. Friedman, A. Haj Yahya, A. Weinberg, L. Feigin, and E. Magori, “First light at the Israeli superradiant THz free electron laser”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL003, unpublished.
- A. G. Gagnaire, Ch. Serre, C. H. Sicard, and N. de Metz-Noblat, “Replacing PS Controls Front End Minicomputers by VME Based 32-bit Processors”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S11LLC01, pp. 375-377.
- K. Fuchsberger and G. H. Hemelsoet, “LHC Online Chromaticity Measurement - Experience After One Year of Operation”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 20-23.
- A. Calia, K. Fuchsberger, G. H. Hemelsoet, and D. Jacquet, “Development of a New System for Detailed LHC Filling Diagnostics and Statistics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1905-1907.
- K. Fuchsberger et al., “Phase Advance Interlocking Throughout the Whole LHC Cycle”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1901-1904.
- E. Bamberg, E. Magori, N. Balal, and V. Bratman, “Permanent helical undulators with strong fields”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM087, pp. 1180-1183.
- C. Crawford et al., “Prototype "Electron Lens" Set-up for the Tevatron Beam-Beam Compensation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCR5, pp. 237-239.
- R. Rausch and Ch. Serre, “Common Control System for the CERN Accelerators”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S02SRU02, pp. 54-58.
- S. V. Kuzikov, I. V. Bandurkin, and A. V. Savilov, “Cyclotron-Undulator Cooling of Electron Beams”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP084, pp. 1041-1043.
Back to search