JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. E. Richards et al., “TRIUMF's ARIEL Project”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU017, pp. 465-468. 
[n]	B. C. Jiang, S. Q. Tian, M. Z. Zhang, Q. L. Zhang, and Z. T. Zhentang, “On-axis Injection Scheme for Ultimate Storage Ring with Double RF Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1657-1660. doi:10.18429/JACoW-IPAC2015-TUPJE018
[n]	M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179. 
[n]	S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and A. I. Titov, “2D Non-Destructive Transverse Diagnostics by Beam Cross-section Monitor”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 393-395. doi:10.18429/JACoW-IBIC2017-WEPCC17
[n]	M. Aiba et al., “Magnet crosstalk in highly-compact light-source storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB072, unpublished. 
[n]	L. Bian, S. P. Li, and Y. P. Liu, “The measurements of static heat loss and unloaded Q0 on the BEPCII SRF cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP82, pp. 708-711. 
[n]	Y. T. Li, C. Y. Liu, and K.-B. Liu, “Inrush Current Suppression Scheme of Hot Swap Power Modules”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3200-3202. doi:10.18429/JACoW-IPAC2015-WEPHA039
[n]	G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911. 
[n]	S. Adam and A. C. Mezger, “Two Dimensional Scans with Adaptive Domain Control”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-09, pp. 668-671. 
[n]	W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174. 
[n]	A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR32, unpublished. 
[n]	S. Alfredson, F. Marti, P. Miller, D. Poe, and G. Stork, “Electrostatic Septum for Kilowatt Heavy Ion Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-10, pp. XX-XX. 
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	M. Yoshioka et al., “Installation and Radiation Maintenance Scenario for J-PARC 50 GeV Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE002, pp. 835-837. 
[n]	Q. Ji et al., “Micro-Electromechanical Systems Based Multi-Beam Ion Accelerators”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZD5, unpublished. 
[n]	V. A. Batalin, “The Acceleration of Different Specific Charge Ions in the Heavy Ions RFQ Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP29, pp. 719-721. 
[n]	J. E. Clendenin, G. A. Loew, R. H. Miller, J.-L. Pellegrin, and J. B. Truher, “Single Bunch Beam Measurements for the Proposed SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2452-2455. 
[n]	M. Louvet, H. D. Dias, M. Diop, and P. Marchand, “Operational Experience With the SOLEIL Storage Ring RF Cryogenic Plant”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP083, pp. 337-340. 
[n]	V. I. Bobylev et al., “The Experience of Big Pulsed Current Acceleration on the Linac I-2”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper J03, pp. 275-278. 
[n]	A. Adelmann, S. R. A. Adam, H. Fitze, R. Geus, M. Humbel, and L. Stingelin, “On Start to End Simulation and Modeling Issues of the Megawatt Proton Beam Facility at PSI”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT055, pp. 3319-3321. 
[n]	K. Tsumaki, M. Hara, R. Nagaoka, H. Tanaka, and K. Yoshida, “Lattice Comparison for the 8 GeV Synchrotron Radiation Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1358-1361. 
[n]	R. E. Laxdal et al., “The ISAC-II SC-Linac Over Current Monitoring System”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP071, pp. 557-559. 
[n]	A. Issatov, P. A. Chubunov, S. V. Mitrofanov, D. K. Pugachev, and Yu. G. Teterev, “Ion Energy Measurement System on the Sample Surface for the High Energy Beam-Line of U400M Accelerator”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC49, unpublished. 
[n]	K. Baptiste et al., “A Third-Harmonic RF Cavity for the Advanced Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20F, pp. 1808-1810. 
[n]	M. Bousonville, S. Choroba, and F. Eints, “Planning and Controlling of the Cold Accelerator Sections Installation in XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 716-718. doi:10.18429/JACoW-IPAC2016-MOPOW006
[n]	L. Bollinger, “The ATLAS Upgrade Project”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-03, pp. 237-241. 
[n]	M. Prom?®, “Design of a 20 MeV Proton Linear Accelerator, New Injector for SATURNE”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-03, pp. 403-409. 
[n]	O. F. Toader, T. Kubley, F. U. Naab, and E. E. Uberseder, “The Alignment of Convergent Beamlines at a New Triple Ion Beam Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 403-405. doi:10.18429/JACoW-IBIC2016-TUPG31
[n]	A. M. Baldwin et al., “Heavy Ion Accelerator Facility”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4294-4296. 
[n]	S. Shope et al., “RADLAC-II Upgrade Experiments”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-41, pp. 628-630. 
[n]	H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154. 
[n]	S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-IBIC2017-TUPCC12
[n]	G. G. Gulbekyan et al., “Axial Injection Channel Of The Dc-350 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 60-62. 
[n]	F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937. 
[n]	N. S. Ginzburg et al., “Experimental Observation of Generation of Superradiance Pulses in the Process of Backscattering of Pump Wave on the Intense Electron Bunch”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOA003, pp. XX-XX. 
[n]	P. Fernandez Carmona et al., “Introducing Big Data Analysis in a Proton Therapy Facility to Reduce Technical Downtime”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1615. doi:10.18429/JACoW-ICALEPCS2019-THCPL06
[n]	F. Tamura, M. Yamamoto, C. Ohmori, A. Schnase, T. Uesugi, and M. Yoshii, “Digital RF Feedforward Systems for Beam Loading Compensation in JKJ Synchrotrons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI049, pp. 2106-2108. 
[n]	G. H. Gong, S. Chen, Q. Du, J. M. Li, Y. Liu, and H. He, “Sub-nanosecond Timing System Design and Development for LHAASO Project”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHMULT04, pp. 646-649. 
[n]	L. Zwalinski et al., “Progress Towards the Commissioning and Installation of the 2PACL CO₂ Cooling Control Systems for Phase II Upgrade of the ATLAS and CMS Experiments”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 802-806. doi:10.18429/JACoW-ICALEPCS2023-TUPDP104
[n]	Z. Guo, H. Geng, Z. Li, and J. Y. Tang, “MEBT2 Design for the C-ADS Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP217, pp. 93-96. 
[n]	M. E. Hill, D. Whittum, and F. Zimmermann, “New Concepts for a Compact 5 TeV Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP22G, pp. 865-870. 
[n]	D. J. Scott, D. Capista, I. Kourbanis, K. Seiya, and M.-J. Yang, “6 Batch Injection and Slipped Beam Tune Measurements in Fermilab's Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP021, pp. 3776-3778. 
[n]	Y. Polsky, P. J. Geoghegan, L. L. Jacobs, W. Lu, S. M. McTeer, and M. A. Plum, “Beam Stop Design Methodology and Description of a New SNS Beam Stop”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA028, pp. 1384-1386. 
[n]	C. H. Chang et al., “Design of a High Field Strength 3.4 Tesla Wiggler for the SRRC Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP30G, pp. 2210-2212. 
[n]	N. A. Stilin, A. T. Holic, M. Liepe, R. D. Porter, J. Sears, and Z. Sun, “Conduction Cooling Methods for Nb?Sn SRF Cavities and Cryomodules”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1192-1195. doi:10.18429/JACoW-IPAC2021-MOPAB391
[n]	H. P. Bohlen, E. Davies, P. Krzeminski, Y. Li, and R. N. Tornoe, “Inductive Output Tubes for Particle Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF075, pp. 1111-1113. 
[n]	T. Wada, T. Kumahara, T. Masuda, H. Yonehara, H. Yoshikawa, and W. Zhen, “Design of SPring-8 Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 151-153. doi:10.18429/JACoW-ICALEPCS1991-S03SRD12
[n]	A. G. Hinton, M. Kokole, T. Milhar, A. Shahveh, and B. J. A. Shepherd, “Design of a Permanent Magnet Based Dipole Quadrupole Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2784-2787. doi:10.18429/JACoW-IPAC2022-THPOTK009
[n]	N. Tokuda et al., “Stochastic Momentum Cooling of a Low Energy Beam at TARN”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2415-2418. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search