Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] J. W. Flanagan, Y. Funakoshi, M. Masuzawa, and K. Oide, “IP Orbital Feedback for Collision Tuning at KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A16, pp. 1211-1213.
[n] S. W. Xu et al., “Design and Analysis of the Cold Cathode Ion Source for 200 MeV Superconducting Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2040-2042. doi:10.18429/JACoW-IPAC2019-TUPTS050
[n] M. Bieler, I. V. Agapov, Y.-C. Chae, J. Keil, G. K. Sahoo, and R. Wanzenberg, “Petra III Operation and Studies 2018”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1419-1421. doi:10.18429/JACoW-IPAC2019-TUPGW015
[n] S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1736-1739.
[n] M. Aiba, M. B?Âge, D. Castronovo, S. Di Mitri, L. Froehlich, and G. Gaio, “Corrector Response Based Alignment at FERMI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO01, pp. 205-208.
[n] Y. Batygin and T. Katayama, “Beam-Beam Interaction of Electrons and Ions at RIKEN RI Beam Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP095L, pp. 1170-1172.
[n] S. M. Khan, M. Gehlot, and G. Mishra, “Pulsed Wire Measurement of 20 mm Period Hybrid Undulator and Effects of Dispersion”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 218-220. doi:10.18429/JACoW-FLS2023-WE4P38
[n] Tmyers, “Development of a Novel Superconducting RF Photocathode Electron Gun”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB11, pp. 116-118.
[n] L. Emery, “Beam Simulation and Radiation Dose Calculation at the Advanced Photon Source with SHOWER, an Interface Program to the EGS4 Code System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB17, pp. 2309-2311.
[n] P. K. Saha, H. Harada, H. Hotchi, Y. Irie, and F. Noda, “Realistic Beam Loss Estimation from the Nuclear Scattering at the RCS Charge-exchange Foil”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH122, pp. 333-335.
[n] A. K. Mitra and P. J. Tallerico, “Spark-Gap Crowbar for High-Voltage Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2862-2865.
[n] S. W. Xu et al., “Design and Analysis of the Cold Cathode Ion Source for 200 MeV Superconducting Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2040-2042. doi:10.18429/JACoW-IPAC2019-TUPTS050
[n] L. Schachter, J. A. Nation, J. D. Ivers, and G. S. Kerslick, “A Compact Modulator for RF Source Development”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1312-1315.
[n] H. Padamsee, J. Kirchgessner, J. Mioduszewski, R. Sundelin, and M. Tigner, “/sup> Colliding Beam Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3240-3242.
[n] M. E. Yuly, “The Houghton College Cyclotron: a Tool for Educating Undergraduates”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE1PB01, pp. 286-290.
[n] S. Schmitz, “The S-Band Linear Collider Test Facility at DESY”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W006, pp. 569-571.
[n] Y. Yamamoto et al., “A New Cavity Diagnostic System for the Vertical Test of 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP076, pp. 1002-1004.
[n] A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 479-482.
[n] S. B. Potter et al., “The Intelligent Observatory”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1-5. doi:10.18429/JACoW-ICALEPCS2023-MO1BCO01
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Flanagan, Y. Funakoshi, M. Masuzawa, and K. Oide, “IP Orbital Feedback for Collision Tuning at KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A16, pp. 1211-1213.
- S. W. Xu et al., “Design and Analysis of the Cold Cathode Ion Source for 200 MeV Superconducting Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2040-2042.
- M. Bieler, I. V. Agapov, Y.-C. Chae, J. Keil, G. K. Sahoo, and R. Wanzenberg, “Petra III Operation and Studies 2018”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1419-1421.
- S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1736-1739.
- M. Aiba, M. B?Âge, D. Castronovo, S. Di Mitri, L. Froehlich, and G. Gaio, “Corrector Response Based Alignment at FERMI”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO01, pp. 205-208.
- Y. Batygin and T. Katayama, “Beam-Beam Interaction of Electrons and Ions at RIKEN RI Beam Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP095L, pp. 1170-1172.
- S. M. Khan, M. Gehlot, and G. Mishra, “Pulsed Wire Measurement of 20 mm Period Hybrid Undulator and Effects of Dispersion”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P38, pp. 218-220.
- Tmyers, “Development of a Novel Superconducting RF Photocathode Electron Gun”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB11, pp. 116-118.
- L. Emery, “Beam Simulation and Radiation Dose Calculation at the Advanced Photon Source with SHOWER, an Interface Program to the EGS4 Code System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB17, pp. 2309-2311.
- P. K. Saha, H. Harada, H. Hotchi, Y. Irie, and F. Noda, “Realistic Beam Loss Estimation from the Nuclear Scattering at the RCS Charge-exchange Foil”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH122, pp. 333-335.
- A. K. Mitra and P. J. Tallerico, “Spark-Gap Crowbar for High-Voltage Power Supply”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2862-2865.
- S. W. Xu et al., “Design and Analysis of the Cold Cathode Ion Source for 200 MeV Superconducting Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2040-2042.
- L. Schachter, J. A. Nation, J. D. Ivers, and G. S. Kerslick, “A Compact Modulator for RF Source Development”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1312-1315.
- H. Padamsee, J. Kirchgessner, J. Mioduszewski, R. Sundelin, and M. Tigner, “/sup> Colliding Beam Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3240-3242.
- M. E. Yuly, “The Houghton College Cyclotron: a Tool for Educating Undergraduates”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE1PB01, pp. 286-290.
- S. Schmitz, “The S-Band Linear Collider Test Facility at DESY”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W006, pp. 569-571.
- Y. Yamamoto et al., “A New Cavity Diagnostic System for the Vertical Test of 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP076, pp. 1002-1004.
- A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 479-482.
- S. B. Potter et al., “The Intelligent Observatory”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO1BCO01, pp. 1-5.
Back to search