Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. G. Arutunian, I. E. Vasiniuk, G. Decker, and G. S. Harutyunyan, “HEAT COUPLING IN MULTI-WIRE VIBRATING WIRE MONITOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH02, pp. XX-XX.
[n] Y. Kim et al., “Linear Accelerator for the PSI-XFEL FEL3 Beamline”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP040, pp. 483-485.
[n] J. Yang, “Status of the HIAF accelerator facility in China”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 8-11. doi:10.18429/JACoW-HIAT2025-MOY01
[n] E. Vinten and A. Lasheen, “Longitudinal microwave instability with long bunches in the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2661-2664. doi:10.18429/JACoW-IPAC2023-WEPA011
[n] I. Neththikumara, K. Deitrick, T. Satogata, N. Sereno, and S. Setiniyaz, “Orbit Correction Studies on The Electron Transport Line from RCS to ESR”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1340, unpublished.
[n] R. Sharankova, A. Shemyakin, E. Chen, and J.-P. Carneiro, “Measurements of the beam longitudinal properties in the Fermilab Linac”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 511-515. doi:10.18429/JACoW-NAPAC2025-TUP065
[n] J. R. Alonso, B. R. Appleton, J. B. Ball, R. A. Gough, A. Jason, and W. T. Weng, “The National Spallation Neutron Source Collaboration: Towards a New Pulsed Neutron Source in the United States”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP085G, pp. 575-577.
[n] P. Alonso Arias et al., “Validation of high efficiency klystron technology”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 663-665. doi:10.18429/JACoW-LINAC2024-THPB015
[n] V. S. Avagyan, A. Babayan, N. M. Dobrovolski, and I. V. Tunyan, “Diffusion Welding of Heterogeneous Materials in Accelerator Technique”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF001, pp. 1586-1587.
[n] N. Delerue and V. Chaumat, “Commissioning of the ThomX heterodyne synchronisation system”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA018, unpublished.
[n] F. E. Mills, S. Reeves, D. G. McGhee, and L. R. Turner, “A Pulsed Septum Magnet for the APS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2817-2820.
[n] S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 160-163. doi:10.18429/JACoW-NAPAC2022-MOPA50
[n] G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1578-1581. doi:10.18429/JACoW-IPAC2024-TUPR64
[n] R. Z. Wu, P. Lu, B. G. Sun, L. L. Tang, D. Y. Wang, and Y. K. Zhao, “A Preliminary Design of Bunch-by-bunch 3D Positions Measurement”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 347-349. doi:10.18429/JACoW-IBIC2023-WEP011
[n] N. Bruchon, I. Karpov, N. Madysa, G. Papotti, and D. Quartullo, “Operational Tool for Automatic Setup of Controlled Longitudinal Emittance Blow-Up in the CERN SPS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 723-728. doi:10.18429/JACoW-ICALEPCS2023-TUPDP086
[n] X. Chang, J. Hirshfield, M. Palmer, M. Fedurin, and Y. Jiang, “Cyclotron resonance accelerator for electron beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1472-1475. doi:10.18429/JACoW-IPAC2023-TUPA062
[n] M. Shirakata and K. Kadowaki, “Development of low-dose proton irradiation test bench using beam window”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5173-5175. doi:10.18429/JACoW-IPAC2023-THPM130
[n] S. Antipov and C. Li, “Coupled bunch stability with variable filling patterns in PETRA IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3542-3545. doi:10.18429/JACoW-IPAC2023-WEPL182
[n] Y. J. Lee, “Physics considerations for a harp system design at the Second Target Station of the Spallation Neutron Source”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 217-221. doi:10.18429/JACoW-NAPAC2025-MOP073
For LaTeX
Use Complete Form
For BibTeX
References
- S. G. Arutunian, I. E. Vasiniuk, G. Decker, and G. S. Harutyunyan, “HEAT COUPLING IN MULTI-WIRE VIBRATING WIRE MONITOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH02, pp. XX-XX.
- Y. Kim et al., “Linear Accelerator for the PSI-XFEL FEL3 Beamline”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP040, pp. 483-485.
- J. Yang, “Status of the HIAF accelerator facility in China”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOY01, pp. 8-11.
- E. Vinten and A. Lasheen, “Longitudinal microwave instability with long bunches in the CERN Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA011, pp. 2661-2664.
- I. Neththikumara, K. Deitrick, T. Satogata, N. Sereno, and S. Setiniyaz, “Orbit Correction Studies on The Electron Transport Line from RCS to ESR”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1340, this conference.
- R. Sharankova, A. Shemyakin, E. Chen, and J.-P. Carneiro, “Measurements of the beam longitudinal properties in the Fermilab Linac”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 511-515.
- J. R. Alonso, B. R. Appleton, J. B. Ball, R. A. Gough, A. Jason, and W. T. Weng, “The National Spallation Neutron Source Collaboration: Towards a New Pulsed Neutron Source in the United States”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP085G, pp. 575-577.
- P. Alonso Arias et al., “Validation of high efficiency klystron technology”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 663-665.
- V. S. Avagyan, A. Babayan, N. M. Dobrovolski, and I. V. Tunyan, “Diffusion Welding of Heterogeneous Materials in Accelerator Technique”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF001, pp. 1586-1587.
- N. Delerue and V. Chaumat, “Commissioning of the ThomX heterodyne synchronisation system”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA018, unpublished.
- F. E. Mills, S. Reeves, D. G. McGhee, and L. R. Turner, “A Pulsed Septum Magnet for the APS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2817-2820.
- S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 160-163.
- G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR64, pp. 1578-1581.
- R. Z. Wu, P. Lu, B. G. Sun, L. L. Tang, D. Y. Wang, and Y. K. Zhao, “A Preliminary Design of Bunch-by-bunch 3D Positions Measurement”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP011, pp. 347-349.
- N. Bruchon, I. Karpov, N. Madysa, G. Papotti, and D. Quartullo, “Operational Tool for Automatic Setup of Controlled Longitudinal Emittance Blow-Up in the CERN SPS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP086, pp. 723-728.
- X. Chang, J. Hirshfield, M. Palmer, M. Fedurin, and Y. Jiang, “Cyclotron resonance accelerator for electron beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA062, pp. 1472-1475.
- M. Shirakata and K. Kadowaki, “Development of low-dose proton irradiation test bench using beam window”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM130, pp. 5173-5175.
- S. Antipov and C. Li, “Coupled bunch stability with variable filling patterns in PETRA IV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL182, pp. 3542-3545.
- Y. J. Lee, “Physics considerations for a harp system design at the Second Target Station of the Spallation Neutron Source”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 217-221.
Back to search