Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. de Cos et al., “Beam Dynamics Simulations on the ESS Bilbao RFQ”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODS6, pp. 100-102.
[n] C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1398-1401. doi:10.18429/JACoW-IPAC2024-TUPG64
[n] B. E. J. Scheible et al., “First Measurements of an Electro-Optical Bunch Arrival-Time Monitor Prototype with PCB-Based Pickups for ELBE”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 214-218. doi:10.18429/JACoW-IBIC2023-TUP012
[n] M. V. Vysotskyy and V. I. Vysotskii, “Peculiarities of the Doppler Effect for Moving Radiative Particles in Dispersive Medium at Extreme Conditions”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH044, pp. 139-141.
[n] C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
[n] I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “The Prototype of New Variable Period Undulator for Novosibirsk Free Electron Laser.”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 677-680. doi:10.18429/JACoW-FEL2015-WEP051
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, and T. Weilbach, “Status of the HESR Electron Cooler Test Set-up”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 771-773. doi:10.18429/JACoW-IPAC2014-MOPRI073
[n] S. Shibuya, K. Noda, S. Yamada, E. M. Syresin, J. Iio, and T. Tachikawa, “An Electron-Cooler-Design for the S-ring at NIRS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE085, pp. 1407-1409.
[n] C. H. G. Hernandez-Garcia et al., “Performance and Modeling of the JLab IR FEL Upgrade Injector”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS61, pp. XX-XX.
[n] T. Mitsumoto et al., “Orbit Analysis of the RIKEN Superconducting Ring Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-16, pp. 507-510.
[n] F. P?®rez et al., “3HC - Third Harmonic Normal Conducting Active Cavity Collaboration Between HZB, DESY and ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1471-1474. doi:10.18429/JACoW-IPAC2022-TUPOMS028
[n] V. Morozov et al., “Proton and electron RLA optics design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 958-961. doi:10.18429/JACoW-IPAC2023-MOPL180
[n] J. W. Lewellen and F. L. Krawczyk, “Simulation of Alpha Magnet Elements in Dipole-only Tracking Codes”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP023, pp. 735-738.
[n] L. Merminga, “Energy Recovery Linacs”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOYKI03, pp. 22-26.
[n] H. Hinterberger, J. Satti, C. Schmidt, R. Sheldon, and R. Yamada, “Bending Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 853-857.
[n] J. Gubeli and P. E. Evtushenko, “Cherenkov Converter for Large Dynamic Range, High Sensitivity Detectors for Use on Wire-Scanners”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 550-553. doi:10.18429/JACoW-IBIC2015-TUPB084
[n] J. W. Lewellen et al., “Technology Maturation for the MaRIE 1.0 X-FEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 181-184. doi:10.18429/JACoW-FEL2015-MOP062
[n] T. Kawaguchi et al., “Design of the Sector Magnets for the RIKEN Superconducting Ring Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-14, pp. 203-206.
[n] W. Yokota et al., “Design of Beam Chopping System for JAERI AVF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-04, pp. 388-391.
[n] E. Sharples, M. Dirsat, J. Knobloch, and A. V. Velez, “Design of the High Power 1.5 GHz Input Couplers for BESSY VSR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 978-981. doi:10.18429/JACoW-IPAC2017-MOPVA051
[n] B. E. J. Scheible, W. Ackermann, M. K. Czwalinna, H. De Gersem, A. Penirschke, and H. Schlarb, “Evaluation of a Novel Pickup Concept for Ultra-Low Charged Short Bunches in X-Ray Free-Electron Lasers”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 145-149. doi:10.18429/JACoW-IBIC2020-WEPP21
[n] K. Arakawa et al., “Status Report on the JAERI AVF Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-07, pp. 617-620.
[n] N. Mashayekh et al., “Integrating Tools to Aid the Automation of PLC Development Within the TwinCat Environment”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 925-928. doi:10.18429/JACoW-ICALEPCS2023-TUSDSC03
For LaTeX
Use Complete Form
For BibTeX
References
- D. de Cos et al., “Beam Dynamics Simulations on the ESS Bilbao RFQ”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODS6, pp. 100-102.
- C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG64, pp. 1398-1401.
- B. E. J. Scheible et al., “First Measurements of an Electro-Optical Bunch Arrival-Time Monitor Prototype with PCB-Based Pickups for ELBE”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP012, pp. 214-218.
- M. V. Vysotskyy and V. I. Vysotskii, “Peculiarities of the Doppler Effect for Moving Radiative Particles in Dispersive Medium at Extreme Conditions”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH044, pp. 139-141.
- C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
- I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “The Prototype of New Variable Period Undulator for Novosibirsk Free Electron Laser.”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 677-680.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, and T. Weilbach, “Status of the HESR Electron Cooler Test Set-up”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 771-773.
- S. Shibuya, K. Noda, S. Yamada, E. M. Syresin, J. Iio, and T. Tachikawa, “An Electron-Cooler-Design for the S-ring at NIRS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE085, pp. 1407-1409.
- C. H. G. Hernandez-Garcia et al., “Performance and Modeling of the JLab IR FEL Upgrade Injector”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS61, pp. XX-XX.
- T. Mitsumoto et al., “Orbit Analysis of the RIKEN Superconducting Ring Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-16, pp. 507-510.
- F. P?®rez et al., “3HC - Third Harmonic Normal Conducting Active Cavity Collaboration Between HZB, DESY and ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1471-1474.
- V. Morozov et al., “Proton and electron RLA optics design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL180, pp. 958-961.
- J. W. Lewellen and F. L. Krawczyk, “Simulation of Alpha Magnet Elements in Dipole-only Tracking Codes”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP023, pp. 735-738.
- L. Merminga, “Energy Recovery Linacs”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOYKI03, pp. 22-26.
- H. Hinterberger, J. Satti, C. Schmidt, R. Sheldon, and R. Yamada, “Bending Magnets of the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 853-857.
- J. Gubeli and P. E. Evtushenko, “Cherenkov Converter for Large Dynamic Range, High Sensitivity Detectors for Use on Wire-Scanners”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 550-553.
- J. W. Lewellen et al., “Technology Maturation for the MaRIE 1.0 X-FEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 181-184.
- T. Kawaguchi et al., “Design of the Sector Magnets for the RIKEN Superconducting Ring Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-14, pp. 203-206.
- W. Yokota et al., “Design of Beam Chopping System for JAERI AVF Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-04, pp. 388-391.
- E. Sharples, M. Dirsat, J. Knobloch, and A. V. Velez, “Design of the High Power 1.5 GHz Input Couplers for BESSY VSR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 978-981.
- B. E. J. Scheible, W. Ackermann, M. K. Czwalinna, H. De Gersem, A. Penirschke, and H. Schlarb, “Evaluation of a Novel Pickup Concept for Ultra-Low Charged Short Bunches in X-Ray Free-Electron Lasers”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 145-149.
- K. Arakawa et al., “Status Report on the JAERI AVF Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-07, pp. 617-620.
- N. Mashayekh et al., “Integrating Tools to Aid the Automation of PLC Development Within the TwinCat Environment”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUSDSC03, pp. 925-928.
Back to search