Favourites
For Word
[n] S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 430-433. doi:10.18429/JACoW-FEL2019-WEP048
[n] G. Pei, “Overview of BEPCII Linac Design”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO406, pp. 49-51.
[n] N. Akasaka, S. Hiramatsu, H. Koiso, M. Masuzawa, K. Satoh, and M. Tejima, “Beam-Based Calibration of Beam Position Monitors and Measurements of the Sextupole Magnet Offsets at KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A16, pp. 1780-1782.
[n] S. M. Lidia, “Beam Diagnostics for FRIB Commissioning”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MO2I1, unpublished.
[n] A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
[n] A. D'Elia, J. Jacob, and V. Serri?¿re, “ESRF-EBS 352 MHz HOM Damped RF Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1034-1036. doi:10.18429/JACoW-IPAC2021-MOPAB333
[n] B. E. Karlsen-Bæck, B. Salvachua, H. Timko, M. Zampetakis, and S. Morales Vigo, “Correlating start-of-ramp losses with beam observables at blat-bottom in the LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 63-66. doi:10.18429/JACoW-IPAC2024-MOPC11
[n] T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 104-107. doi:10.18429/JACoW-IPAC2019-MOPGW017
[n] S. P. Zhang, J. Y. Li, and C. Meng, “Bunching System Optimization Based on MOGA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1018-1020. doi:10.18429/JACoW-IPAC2019-MOPTS073
[n] V. Bekhterev et al., “Modernization of the mVINIS Ion Source”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH016, pp. 68-70.
[n] M. A. Clarke-Gayther, “A Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT138, pp. 1449-1451.
[n] C. Ligi, G. Delle Monache, R. Ricci, and C. Sanelli, “DAFNE Cryogenic System: Status and Perspectives”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE026, pp. 2523-2525.
[n] Y. Suetsugu, M. Ohtsuka, and M. Shirai, “Application of Stain-less Steel, Copper Alloy and Aluminum Alloy MO (Matsumoto-Ohtsuka) -type Flanges to Accelerator Beam Pipes”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA080, pp. 3855-3857.
[n] K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1014-1016. doi:10.18429/JACoW-IPAC2024-TUPC09
[n] J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 640-643.
[n] D. T. Palmer et al., “Simulations of the BNL/SLAC/UCLA 1.6 Cell Emittance Compensated Photocathode RF Gun Low Energy Beam Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WXE03, pp. 2432-2434.
[n] M. M. Al Shehab, “Vibration Measurement & Simulation of Magnet & Girder in SESAME”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 111-113. doi:10.18429/JACoW-MEDSI2018-TUPH33
[n] T. Takahashi, S. Sakanaka, and M. Izawa, “Design of RF Components for the Advanced Ring at KEK”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D034, pp. 761-763.
[n] D. Schrage et al., “A 6.7 MeV CW RFQ Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W025, pp. 1093-1095.
[n] A. Drees, L. Ahrens, R. Fliller III, W. Fu, G. Heppner, and V. Kain, “Abort Gap Studies and Cleaning during RHIC Heavy Ion Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB030, pp. 1685-1687.
[n] N. Inabe, T. Katayama, and M. Tanabe, “Instability of Electron Beams at DSR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP09H, pp. 1017-1022.
[n] N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1444-1448. doi:10.18429/JACoW-ICALEPCS2023-THPDP057
For LaTeX
Use Complete Form
For BibTeX
References
- S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 430-433.
- G. Pei, “Overview of BEPCII Linac Design”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO406, pp. 49-51.
- N. Akasaka, S. Hiramatsu, H. Koiso, M. Masuzawa, K. Satoh, and M. Tejima, “Beam-Based Calibration of Beam Position Monitors and Measurements of the Sextupole Magnet Offsets at KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A16, pp. 1780-1782.
- S. M. Lidia, “Beam Diagnostics for FRIB Commissioning”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper MO2I1, unpublished.
- A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
- A. D'Elia, J. Jacob, and V. Serri?¿re, “ESRF-EBS 352 MHz HOM Damped RF Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1034-1036.
- B. E. Karlsen-Bæck, B. Salvachua, H. Timko, M. Zampetakis, and S. Morales Vigo, “Correlating start-of-ramp losses with beam observables at blat-bottom in the LHC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC11, pp. 63-66.
- T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 104-107.
- S. P. Zhang, J. Y. Li, and C. Meng, “Bunching System Optimization Based on MOGA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1018-1020.
- V. Bekhterev et al., “Modernization of the mVINIS Ion Source”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH016, pp. 68-70.
- M. A. Clarke-Gayther, “A Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT138, pp. 1449-1451.
- C. Ligi, G. Delle Monache, R. Ricci, and C. Sanelli, “DAFNE Cryogenic System: Status and Perspectives”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE026, pp. 2523-2525.
- Y. Suetsugu, M. Ohtsuka, and M. Shirai, “Application of Stain-less Steel, Copper Alloy and Aluminum Alloy MO (Matsumoto-Ohtsuka) -type Flanges to Accelerator Beam Pipes”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA080, pp. 3855-3857.
- K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC09, pp. 1014-1016.
- J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 640-643.
- D. T. Palmer et al., “Simulations of the BNL/SLAC/UCLA 1.6 Cell Emittance Compensated Photocathode RF Gun Low Energy Beam Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WXE03, pp. 2432-2434.
- M. M. Al Shehab, “Vibration Measurement & Simulation of Magnet & Girder in SESAME”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 111-113.
- T. Takahashi, S. Sakanaka, and M. Izawa, “Design of RF Components for the Advanced Ring at KEK”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D034, pp. 761-763.
- D. Schrage et al., “A 6.7 MeV CW RFQ Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W025, pp. 1093-1095.
- A. Drees, L. Ahrens, R. Fliller III, W. Fu, G. Heppner, and V. Kain, “Abort Gap Studies and Cleaning during RHIC Heavy Ion Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB030, pp. 1685-1687.
- N. Inabe, T. Katayama, and M. Tanabe, “Instability of Electron Beams at DSR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP09H, pp. 1017-1022.
- N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP057, pp. 1444-1448.
Back to search