Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Hirao et al., “Beam Transport System for the INS 176-cm Sector-Focusing Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-22, pp. 312-314.
[n] V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
[n] D. R. Walters, “Aluminum Coating in the Undulator Vacuum Chamber for the LINAC Coherence Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN115, pp. 437-439.
[n] R. Kuroda et al., “Development of Laser System for Compact Laser Compton Scattering X-ray Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP158, pp. 1878-1880.
[n] M. Poelker et al., “Status of High Polarization DC High Voltage GaAs Photoguns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB01, pp. 3756-3760.
[n] J. A. Uythoven et al., “Experience with the LHC Beam Dump Post-Operational Checks System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP029, pp. 1599-1601.
[n] K. E. Robinson and D. C. Quimby, “Canted-Pole Transverse Gradients in Planar Undulators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 428-431.
[n] M. Znidarcic, R. Hrovatin, and M. Satoh, “High Precision Electronics for Single Pass Applications”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO88, pp. 715-718.
[n] Y. S. Tan and R. Seviour, “Metamaterial Mediated Inverse Cherenkov Acceleration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD043, pp. 4378-4380.
[n] P. V. Bogdanov et al., “Experience of the MGC-20 Operation and its Prospects”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-04, pp. 673-676.
[n] M. White et al., “Magnets, Supports, and Controls for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH088, pp. 452-454.
[n] M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
[n] J. Einstein, S. Biedron, H. Freund, S. V. Milton, and G. Dattoli, “Simulation and Analysis of Laser/Electron Beam interaction for use as a Free Electron Laser”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1875-1877. doi:10.18429/JACoW-IPAC2015-TUPMA019
[n] J. A. Carter et al., “Progress on the Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 30-32. doi:10.18429/JACoW-MEDSI2018-TUPH04
[n] G. Burton, “Cyclotron Beam Sharing for Multiple Target Irradiations”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C11, pp. XX-XX.
[n] P. L. Lemut, T. Karcnik, and A. Kosicek, “Interlock -- the Machine Protection Function of Libera Brilliance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC148, pp. 3336-3338.
[n] A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784.
[n] B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1293-1296.
[n] G. Wu, L. Phillips, R. Sundelin, and A.-M. Valente, “Niobium Thin Film Properties Affected by Deposition Energy during Vacuum Depostion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB087, pp. 1401-1403.
[n] M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 63-65. doi:10.18429/JACoW-IBIC2023-MOP013
[n] J. M. Grames et al., “Lifetime Measurements of High Polarization Strained-Superlattice Gallium Arsenide at Beam Current > 1 Milliamp using a New 100kV Load Lock Photogun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS064, pp. 3130-3132.
[n] K. N. Li et al., “Design and Development of the Control System for a Compact Carbon-14 AMS Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 722-723. doi:10.18429/JACoW-ICALEPCS2017-TUPHA130
[n] P. F. Schultz, E. P. Colton, V. W. Hughes, A. Kponou, and D. R. Moffett, “Polarized H- Ion Source Development for the AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2675-2678.
[n] M. J. Barnes, L. Ducimeti?¿re, and J. A. Uythoven, “CLIC Pre-Damping and Damping Ring Kickers: Initial Ideas to Achieve Stability Requirements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD089, pp. 3305-3307.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Hirao et al., “Beam Transport System for the INS 176-cm Sector-Focusing Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-22, pp. 312-314.
- V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
- D. R. Walters, “Aluminum Coating in the Undulator Vacuum Chamber for the LINAC Coherence Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN115, pp. 437-439.
- R. Kuroda et al., “Development of Laser System for Compact Laser Compton Scattering X-ray Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP158, pp. 1878-1880.
- M. Poelker et al., “Status of High Polarization DC High Voltage GaAs Photoguns”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB01, pp. 3756-3760.
- J. A. Uythoven et al., “Experience with the LHC Beam Dump Post-Operational Checks System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP029, pp. 1599-1601.
- K. E. Robinson and D. C. Quimby, “Canted-Pole Transverse Gradients in Planar Undulators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 428-431.
- M. Znidarcic, R. Hrovatin, and M. Satoh, “High Precision Electronics for Single Pass Applications”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO88, pp. 715-718.
- Y. S. Tan and R. Seviour, “Metamaterial Mediated Inverse Cherenkov Acceleration”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD043, pp. 4378-4380.
- P. V. Bogdanov et al., “Experience of the MGC-20 Operation and its Prospects”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper J-04, pp. 673-676.
- M. White et al., “Magnets, Supports, and Controls for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH088, pp. 452-454.
- M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
- J. Einstein, S. Biedron, H. Freund, S. V. Milton, and G. Dattoli, “Simulation and Analysis of Laser/Electron Beam interaction for use as a Free Electron Laser”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1875-1877.
- J. A. Carter et al., “Progress on the Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 30-32.
- G. Burton, “Cyclotron Beam Sharing for Multiple Target Irradiations”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C11, pp. XX-XX.
- P. L. Lemut, T. Karcnik, and A. Kosicek, “Interlock -- the Machine Protection Function of Libera Brilliance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC148, pp. 3336-3338.
- A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 781-784.
- B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1293-1296.
- G. Wu, L. Phillips, R. Sundelin, and A.-M. Valente, “Niobium Thin Film Properties Affected by Deposition Energy during Vacuum Depostion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB087, pp. 1401-1403.
- M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP013, pp. 63-65.
- J. M. Grames et al., “Lifetime Measurements of High Polarization Strained-Superlattice Gallium Arsenide at Beam Current > 1 Milliamp using a New 100kV Load Lock Photogun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS064, pp. 3130-3132.
- K. N. Li et al., “Design and Development of the Control System for a Compact Carbon-14 AMS Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 722-723.
- P. F. Schultz, E. P. Colton, V. W. Hughes, A. Kponou, and D. R. Moffett, “Polarized H- Ion Source Development for the AGS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2675-2678.
- M. J. Barnes, L. Ducimeti?¿re, and J. A. Uythoven, “CLIC Pre-Damping and Damping Ring Kickers: Initial Ideas to Achieve Stability Requirements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD089, pp. 3305-3307.
Back to search