Favourites
For Word
[n] J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4056-4058.
[n] R. A. J. Soden, G. Hill, P.-F. Maistre, Y. A. Maumary, and S. J. Narciso, “Achieving High-Speed Data Acquisition for Real-Time Beam Control and Measurement”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM113, pp. 487-490.
[n] R. Steerenberg et al., “Operation and Performance of the Cern Large Hadron Collider During Proton Run 2”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 504-507. doi:10.18429/JACoW-IPAC2019-MOPMP031
[n] J. Keil and D. Husmann, “Beam-Based Calibration of the Linear Optics Model of ELSA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V004, pp. 1373-1375.
[n] J.-C. Chang, Y.-C. Chung, C. Y. Liu, A. Sheng, Z.-D. Tsai, and T.-S. Ueng, “Numerical Simulation of the Air Conditioning System Design for the 3 GeV TPS Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP051, pp. 2914-2916.
[n] K. M. Schirm, E. Chiaveri, B. Thony, and W. Weingarten, “Analysis of the Coating Success Rate in the Series Production of Nb/Cu Superconducting RF Cavities for LEP2”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C19, pp. 461-465.
[n] H. Butler and T. Collins, “Opening Remarks on Computer Control”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 336-337.
[n] W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 102-105. doi:10.18429/JACoW-NAPAC2019-MOPLM06
[n] R. K. Koul and E. Crosbie, “The APS Transfer Line from Linac to Injector Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 902-905.
[n] R. Gupta, “Field Quality in Superconducting Magnets for Large Particle Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP003G, pp. 2219-2221.
[n] T. Kawaguchi et al., “Design of the Sector Magnets for the RIKEN Superconducting Ring Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-14, pp. 203-206.
[n] H. Safa, “Progress and Trends in SCRF Cavities For Future Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF101, pp. 197-201.
[n] A. Bocci et al., “Beam Diagnostics at IR Wavelengths at NSRL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP056, pp. 3582-3584.
[n] Y. Li et al., “Moderation of Positive Muons by Helium Gas”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3667-3669. doi:10.18429/JACoW-IPAC2019-THPGW039
[n] A. H. Lumpkin et al., “Commissioning Status of the ASTA Facility at Fermilab”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP075, pp. 537-540.
[n] C. P. Welsch, “Enhancing Hadron Therapy through OMA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 568-571. doi:10.18429/JACoW-IPAC2018-MOPML069
[n] J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 399-402. doi:10.18429/JACoW-IPAC2021-MOPAB109
[n] A. Drago, “Fast Horizontal e+ Instability Measurements in DANE”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP057, pp. 3585-3587.
[n] G. Velev et al., “Magnetic Field Measurements of the LHC Inner Triplet Quadrupoles Produced at Fermilab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF074, pp. 1777-1779.
[n] W. J. Coops, “FMIT Prototype Linac Tank”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2991-2994.
[n] J. F. Power and J. D. Gilpatrick, “Prototype Beam Position and Phase Monitoring Electronics for LANSCE”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP076, pp. 3621-3623.
[n] L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
[n] D. R. Dechow, J. F. Amundson, B. Norris, P. Spentzouris, and P. Stoltz, “Software Components for Electron Cloud Simulation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP088, pp. 1735-1737.
[n] N. Wang and Q. Qin, “Longitudinal Wakefields and Impedance in the CSNS/RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP081, pp. 1718-1720.
[n] J. D. Sedillo and J. D. Gilpatrick, “cRIO-Based Wire Scanner Motion Control”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP077, pp. 3624-3626.
[n] D. Bychanok et al., “Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 165-167. doi:10.18429/JACoW-RuPAC2021-MOPSA16
[n] G. V. Trubnikov et al., “Status of R&D on New Superconducting Injector Linac for Nuclotron-NICA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3282-3285. doi:10.18429/JACoW-IPAC2017-WEPVA014
[n] Y. Bao, X. Li, Y. Li, Y. P. Song, and X. Tong, “High-Quality Muon Beam Production Based on Superconducting Solenoids”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 630-632. doi:10.18429/JACoW-IPAC2019-MOPRB026
[n] J. Biswas et al., “Quest for an optimal spin-polarized electron source for the Electron-Ion Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 626-629. doi:10.18429/JACoW-IPAC2024-MOPR77
[n] J. Keil and K. Balewski, “Correction of the Linear Optics at PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD085, pp. 4482-4484.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4056-4058.
- R. A. J. Soden, G. Hill, P.-F. Maistre, Y. A. Maumary, and S. J. Narciso, “Achieving High-Speed Data Acquisition for Real-Time Beam Control and Measurement”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM113, pp. 487-490.
- R. Steerenberg et al., “Operation and Performance of the Cern Large Hadron Collider During Proton Run 2”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 504-507.
- J. Keil and D. Husmann, “Beam-Based Calibration of the Linear Optics Model of ELSA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V004, pp. 1373-1375.
- J.-C. Chang, Y.-C. Chung, C. Y. Liu, A. Sheng, Z.-D. Tsai, and T.-S. Ueng, “Numerical Simulation of the Air Conditioning System Design for the 3 GeV TPS Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP051, pp. 2914-2916.
- K. M. Schirm, E. Chiaveri, B. Thony, and W. Weingarten, “Analysis of the Coating Success Rate in the Series Production of Nb/Cu Superconducting RF Cavities for LEP2”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C19, pp. 461-465.
- H. Butler and T. Collins, “Opening Remarks on Computer Control”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 336-337.
- W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 102-105.
- R. K. Koul and E. Crosbie, “The APS Transfer Line from Linac to Injector Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 902-905.
- R. Gupta, “Field Quality in Superconducting Magnets for Large Particle Accelerators”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP003G, pp. 2219-2221.
- T. Kawaguchi et al., “Design of the Sector Magnets for the RIKEN Superconducting Ring Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-14, pp. 203-206.
- H. Safa, “Progress and Trends in SCRF Cavities For Future Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF101, pp. 197-201.
- A. Bocci et al., “Beam Diagnostics at IR Wavelengths at NSRL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP056, pp. 3582-3584.
- Y. Li et al., “Moderation of Positive Muons by Helium Gas”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3667-3669.
- A. H. Lumpkin et al., “Commissioning Status of the ASTA Facility at Fermilab”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP075, pp. 537-540.
- C. P. Welsch, “Enhancing Hadron Therapy through OMA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 568-571.
- J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 399-402.
- A. Drago, “Fast Horizontal e+ Instability Measurements in DANE”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP057, pp. 3585-3587.
- G. Velev et al., “Magnetic Field Measurements of the LHC Inner Triplet Quadrupoles Produced at Fermilab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF074, pp. 1777-1779.
- W. J. Coops, “FMIT Prototype Linac Tank”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2991-2994.
- J. F. Power and J. D. Gilpatrick, “Prototype Beam Position and Phase Monitoring Electronics for LANSCE”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP076, pp. 3621-3623.
- L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
- D. R. Dechow, J. F. Amundson, B. Norris, P. Spentzouris, and P. Stoltz, “Software Components for Electron Cloud Simulation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP088, pp. 1735-1737.
- N. Wang and Q. Qin, “Longitudinal Wakefields and Impedance in the CSNS/RCS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP081, pp. 1718-1720.
- J. D. Sedillo and J. D. Gilpatrick, “cRIO-Based Wire Scanner Motion Control”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP077, pp. 3624-3626.
- D. Bychanok et al., “Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 165-167.
- G. V. Trubnikov et al., “Status of R&D on New Superconducting Injector Linac for Nuclotron-NICA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3282-3285.
- Y. Bao, X. Li, Y. Li, Y. P. Song, and X. Tong, “High-Quality Muon Beam Production Based on Superconducting Solenoids”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 630-632.
- J. Biswas et al., “Quest for an optimal spin-polarized electron source for the Electron-Ion Collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR77, pp. 626-629.
- J. Keil and K. Balewski, “Correction of the Linear Optics at PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD085, pp. 4482-4484.
Back to search