Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Schnase et al., “Application of Digital Narrow Band Noise to J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA051, pp. 1446-1448.
[n] Y. Papaphilippou, L. Farvacque, A. Mostacci, A. Patriarca, and E. Plouviez, “Linear Optics Measurements in the ESRF Booster”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE027, pp. 1973-1975.
[n] M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256.
[n] Y. Papaphilippou, P. Elleaume, L. Farvacque, and A. Ropert, “Lattice Upgrade Options for the ESRF Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE028, pp. 2047-2049.
[n] E. Todesco and M. Giovannozzi, “Optimizing the filling factor in high energy colliders”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3708-3711. doi:10.18429/JACoW-IPAC2023-WEPM061
[n] B. Clegg, “Recent Developments in Intense Polarized Hydrogen and Deuterium Ion Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2083-2088.
[n] H. Burkhardt, A. Macpherson, S. Cavalier, and P. M. Puzo, “Plans for High Beta Optics in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC007, pp. 133-135.
[n] R. Nagaoka and L. Farvacque, “Analysis of Normal and Skew Quadrupole Errors at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH127, pp. 3534-3536.
[n] B. Visentin, J. P. Charrier, B. Coadou, and D. Roudier, “Cavity Baking : A Cure for the High Accelerator Field Qo Drop”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP015, pp. 198-202.
[n] A. Kuramoto, N. Baboi, and H. Hayano, “Simulations and Measurements of Beam Pipe Modes excited in 9-cell Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2540-2542. doi:10.18429/JACoW-IPAC2014-WEPRI029
[n] F. G. Ruedenauer, “A Mass Analyzer System for the High Voltage Terminal of a Van de Graaff Heavy Ion Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 35-38.
[n] M. Yoshimoto, “Development of the H0 Dump Branch Duct for the Additional Collimation System in J-PARC RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS013, pp. 1545-1547.
[n] M. A. Palmer et al., “The Conversion and Operation of the Cornell Electron Storage Ring as a Test Accelerator (CesrTA) for Damping Rings Research and Development”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI02, pp. 4200-4204.
[n] D. Gonnella et al., “Update on Nitrogen-doped 9-cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3446-3449. doi:10.18429/JACoW-IPAC2015-WEPTY072
[n] L. Farvacque and R. Nagaoka, “Calibration of Quadrupole Magnets via Response Matrix Fitting”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02G, pp. 909-911.
[n] F. Tamura et al., “Dual-harmonic Phase Control in the J-PARC RCS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA050, pp. 1443-1445.
[n] T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
[n] V. F. Khan, W. Anders, A. Burrill, J. Knobloch, and A. Neumann, “High Power RF Input Couplers and Test Stand for the BERLinPro Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2487-2489. doi:10.18429/JACoW-IPAC2014-WEPRI006
[n] S. M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, B. Nash, and P. Raimondi, “Optics Adaptations for Bending Magnet Beam Lines at ESRF: Short Bend, 2-Pole Wiggler, 3-Pole Wiggler”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 666-669. doi:10.18429/JACoW-IPAC2017-MOPIK062
[n] M. Castellano et al., “Diagnostic and Control System for the LISA Project”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1018-1021.
[n] J. P. Charrier, B. Coadou, and B. Visentin, “Improvements of Superconducting Cavity Performances at High Accelerating Gradients”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP07B, pp. 1885-1890.
[n] L. Farvacque, “SR-related Accelerator Physics Issues”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEY01T, pp. 81-84.
[n] L. Farvacque, R. Nagaoka, and K. Scheidt Grenoble, “Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT08, pp. XX-XX.
[n] S. M. Liuzzo, N. Carmignani, L. Farvacque, and B. Nash, “Lattice Tuning and Error Setting in Accelerator Toolbox”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3067-3070. doi:10.18429/JACoW-IPAC2017-WEPIK061
[n] C. E. Montanari, A. Bazzani, M. Giovannozzi, P. Hermes, and S. Redaelli, “Recent measurements and analyses of the beam-halo dynamics at the CERN LHC using collimator scans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2693-2696. doi:10.18429/JACoW-IPAC2023-WEPA022
[n] M. Manzolaro et al., “The SPES project: Research and Development for the Multi-Foil Direct Target”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-08, pp. 12-15.
[n] J. Lewellen, C. Taylor, D. Dimitrov, G. Dale, J. Tapia, and J. Barraza, “An overview of the proton storage ring upgrade at LANSCE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1669-1672. doi:10.18429/JACoW-IPAC2024-TUPS16
[n] K. Hasegawa et al., “Simulation of Magnetic Alloy Loaded RF Cavity and HOM Analysis”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA011, pp. 3697-3698.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Schnase et al., “Application of Digital Narrow Band Noise to J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA051, pp. 1446-1448.
- Y. Papaphilippou, L. Farvacque, A. Mostacci, A. Patriarca, and E. Plouviez, “Linear Optics Measurements in the ESRF Booster”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE027, pp. 1973-1975.
- M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256.
- Y. Papaphilippou, P. Elleaume, L. Farvacque, and A. Ropert, “Lattice Upgrade Options for the ESRF Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE028, pp. 2047-2049.
- E. Todesco and M. Giovannozzi, “Optimizing the filling factor in high energy colliders”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM061, pp. 3708-3711.
- B. Clegg, “Recent Developments in Intense Polarized Hydrogen and Deuterium Ion Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2083-2088.
- H. Burkhardt, A. Macpherson, S. Cavalier, and P. M. Puzo, “Plans for High Beta Optics in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC007, pp. 133-135.
- R. Nagaoka and L. Farvacque, “Analysis of Normal and Skew Quadrupole Errors at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH127, pp. 3534-3536.
- B. Visentin, J. P. Charrier, B. Coadou, and D. Roudier, “Cavity Baking : A Cure for the High Accelerator Field Qo Drop”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP015, pp. 198-202.
- A. Kuramoto, N. Baboi, and H. Hayano, “Simulations and Measurements of Beam Pipe Modes excited in 9-cell Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2540-2542.
- F. G. Ruedenauer, “A Mass Analyzer System for the High Voltage Terminal of a Van de Graaff Heavy Ion Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 35-38.
- M. Yoshimoto, “Development of the H0 Dump Branch Duct for the Additional Collimation System in J-PARC RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS013, pp. 1545-1547.
- M. A. Palmer et al., “The Conversion and Operation of the Cornell Electron Storage Ring as a Test Accelerator (CesrTA) for Damping Rings Research and Development”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1RAI02, pp. 4200-4204.
- D. Gonnella et al., “Update on Nitrogen-doped 9-cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3446-3449.
- L. Farvacque and R. Nagaoka, “Calibration of Quadrupole Magnets via Response Matrix Fitting”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP02G, pp. 909-911.
- F. Tamura et al., “Dual-harmonic Phase Control in the J-PARC RCS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA050, pp. 1443-1445.
- T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
- V. F. Khan, W. Anders, A. Burrill, J. Knobloch, and A. Neumann, “High Power RF Input Couplers and Test Stand for the BERLinPro Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2487-2489.
- S. M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, B. Nash, and P. Raimondi, “Optics Adaptations for Bending Magnet Beam Lines at ESRF: Short Bend, 2-Pole Wiggler, 3-Pole Wiggler”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 666-669.
- M. Castellano et al., “Diagnostic and Control System for the LISA Project”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1018-1021.
- J. P. Charrier, B. Coadou, and B. Visentin, “Improvements of Superconducting Cavity Performances at High Accelerating Gradients”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP07B, pp. 1885-1890.
- L. Farvacque, “SR-related Accelerator Physics Issues”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEY01T, pp. 81-84.
- L. Farvacque, R. Nagaoka, and K. Scheidt Grenoble, “Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper IT08, pp. XX-XX.
- S. M. Liuzzo, N. Carmignani, L. Farvacque, and B. Nash, “Lattice Tuning and Error Setting in Accelerator Toolbox”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3067-3070.
- C. E. Montanari, A. Bazzani, M. Giovannozzi, P. Hermes, and S. Redaelli, “Recent measurements and analyses of the beam-halo dynamics at the CERN LHC using collimator scans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA022, pp. 2693-2696.
- M. Manzolaro et al., “The SPES project: Research and Development for the Multi-Foil Direct Target”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-08, pp. 12-15.
- J. Lewellen, C. Taylor, D. Dimitrov, G. Dale, J. Tapia, and J. Barraza, “An overview of the proton storage ring upgrade at LANSCE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS16, pp. 1669-1672.
- K. Hasegawa et al., “Simulation of Magnetic Alloy Loaded RF Cavity and HOM Analysis”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA011, pp. 3697-3698.
Back to search