Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Attal et al., “Progress Report and First Operation of the GANIL Injector”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-07, pp. 121-123.
[n] J. R. Alonso, “Review of Ion Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 95-100.
[n] J. P. Perrine, M. Thivent, and F. Voelker, “The Pulsed Power Converter and Septum Magnet System for Injection into the Electron Storage Ring at ESRF”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP028G, pp. 2394-2396.
[n] A. Fallahi, F. X. Kaertner, A. Yahaghi, and M. Fakhari, “Ultrafast Electron Guns for the Efficient Acceleration using Single-Cycle THz Pulses”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1578-1580. doi:10.18429/JACoW-IPAC2016-TUPMY015
[n] K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
[n] H. Wang, U. Ratzinger, and M. Schuett, “Operations of Copper Cavities at Cryogenic Temperatures”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 533-536. doi:10.18429/JACoW-LINAC2022-TUPOGE18
[n] A. Dobrosavljevic et al., “Commissioning of the mVINIS Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-14, pp. 443-446.
[n] N. Wang and Q. Qin, “Transverse Impedance Calculation for Simplified Model of Ferrite Kicker Magnet with Beta < 1”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS059, pp. 742-744.
[n] H. W. Schreuder, “Review of Superconducting Cyclotrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 82-87.
[n] J. Dietrich, D. Dinev, S. A. Martin, and R. Wagner, “Simulation and Correction of the Closed Orbit in the Cooler Synchrotron COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 744-747.
[n] M. Cejp, D. Zielinski, and R. Murillo-Garcia, “Software architecture of FGC4, CERN’s next-generation power converter control platform”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3754-3757. doi:10.18429/JACoW-IPAC2023-WEPM080
[n] H. Bluem, M. D. Cole, J. Rathke, T. Schultheiss, and A. M. M. Todd, “Recent Advances in High-Brightness Electron Guns at AES”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI070, pp. 1756-1758.
[n] S. Saadat and M. Boland, “Model of a dynamic orbit correction system based on neural network in CLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2862-2865. doi:10.18429/JACoW-IPAC2023-WEPA094
[n] C. Rodrigues, G. O. Brunheira, B. E. Limeira, and G. M. Rogatto, “Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1227-1229. doi:10.18429/JACoW-IPAC2019-TUPMP001
[n] S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
[n] M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
[n] J. J. Li, Y. X. Qiu, L. Liao, K. Zhou, L. Hu, and J. Zhuang, “The Information System of Proton Beam in CSNS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA087, pp. XX-XX.
[n] B. H. Chung, K. H. Chung, K. O. Lee, S. K. Ko, S. J. Noh, and Y. D. Lee, “Present Status of 700 MHz Klystron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP17004, pp. XX-XX.
[n] F. M. Mirapeix et al., “Status of the Manufacturing of Accelerating Structures for LINACs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC010, pp. 1009-1011.
[n] P. F. Meads Jr, “A New FFAG Orbit Code”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2243-2246.
[n] J. Upadhyay, K. Bishofberger, S. Kurennoy, J. Bernardin, J. Lyles, and J. Shoemaker, “Additive manufacturing of copper RF structures for particle accelerator applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 53-55. doi:10.18429/JACoW-IPAC2023-MOOG3
[n] H. S. Kim, K. H. Chung, H. J. Kwon, K. O. Lee, and S. J. Noh, “Status Report on High Power RF Source for KOMAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU464, pp. 461-463.
[n] Yu. Ts. Oganessian et al., “The Present Status and Perspectives of Development of the JINR Laboratory of Nuclear Reactions Heavy Ion Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H06, pp. 317-321.
[n] S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2208-2210. doi:10.18429/JACoW-IPAC2016-WEPMB041
[n] C. Rodrigues and A. R. Silva, “Active Shunts for the LNLS Storage Ring Quadrupoles”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN002, pp. 143-145.
[n] J. Galambos, “High Intensity Challenges at the Spallation Neutron Source”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL01, pp. XX-XX.
[n] L. Hoummi et al., “Off-energy operation of a HMBA lattice”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 390-393. doi:10.18429/JACoW-IPAC2023-MOPA143
[n] M. Chung, L. R. Prost, and V. D. Shiltsev, “Space-charge Compensation for High-intensity Linear and Circular Accelerators at Fermilab”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBB1, pp. 402-404.
[n] S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873.
[n] Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 233-236. doi:10.18429/JACoW-IBIC2020-THPP12
[n] M. Boyes and T. A. Pelaia, “Introducing CAML II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper FRA001, pp. 922-924.
[n] S. Fleury, E. Todesco, M. Barberan Marin, and M. Bernardini, “HL-LHC magnet production: building a complex planning to identify bottlenecks”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1645-1648. doi:10.18429/JACoW-IPAC2024-TUPS08
For LaTeX
Use Complete Form
For BibTeX
References
- P. Attal et al., “Progress Report and First Operation of the GANIL Injector”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-07, pp. 121-123.
- J. R. Alonso, “Review of Ion Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 95-100.
- J. P. Perrine, M. Thivent, and F. Voelker, “The Pulsed Power Converter and Septum Magnet System for Injection into the Electron Storage Ring at ESRF”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP028G, pp. 2394-2396.
- A. Fallahi, F. X. Kaertner, A. Yahaghi, and M. Fakhari, “Ultrafast Electron Guns for the Efficient Acceleration using Single-Cycle THz Pulses”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1578-1580.
- K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
- H. Wang, U. Ratzinger, and M. Schuett, “Operations of Copper Cavities at Cryogenic Temperatures”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 533-536.
- A. Dobrosavljevic et al., “Commissioning of the mVINIS Ion Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-14, pp. 443-446.
- N. Wang and Q. Qin, “Transverse Impedance Calculation for Simplified Model of Ferrite Kicker Magnet with Beta < 1”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS059, pp. 742-744.
- H. W. Schreuder, “Review of Superconducting Cyclotrons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 82-87.
- J. Dietrich, D. Dinev, S. A. Martin, and R. Wagner, “Simulation and Correction of the Closed Orbit in the Cooler Synchrotron COSY-Juelich”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 744-747.
- M. Cejp, D. Zielinski, and R. Murillo-Garcia, “Software architecture of FGC4, CERN’s next-generation power converter control platform”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM080, pp. 3754-3757.
- H. Bluem, M. D. Cole, J. Rathke, T. Schultheiss, and A. M. M. Todd, “Recent Advances in High-Brightness Electron Guns at AES”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI070, pp. 1756-1758.
- S. Saadat and M. Boland, “Model of a dynamic orbit correction system based on neural network in CLS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA094, pp. 2862-2865.
- C. Rodrigues, G. O. Brunheira, B. E. Limeira, and G. M. Rogatto, “Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1227-1229.
- S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
- M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
- J. J. Li, Y. X. Qiu, L. Liao, K. Zhou, L. Hu, and J. Zhuang, “The Information System of Proton Beam in CSNS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA087, pp. XX-XX.
- B. H. Chung, K. H. Chung, K. O. Lee, S. K. Ko, S. J. Noh, and Y. D. Lee, “Present Status of 700 MHz Klystron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP17004, pp. XX-XX.
- F. M. Mirapeix et al., “Status of the Manufacturing of Accelerating Structures for LINACs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC010, pp. 1009-1011.
- P. F. Meads Jr, “A New FFAG Orbit Code”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2243-2246.
- J. Upadhyay, K. Bishofberger, S. Kurennoy, J. Bernardin, J. Lyles, and J. Shoemaker, “Additive manufacturing of copper RF structures for particle accelerator applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOOG3, pp. 53-55.
- H. S. Kim, K. H. Chung, H. J. Kwon, K. O. Lee, and S. J. Noh, “Status Report on High Power RF Source for KOMAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU464, pp. 461-463.
- Yu. Ts. Oganessian et al., “The Present Status and Perspectives of Development of the JINR Laboratory of Nuclear Reactions Heavy Ion Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H06, pp. 317-321.
- S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2208-2210.
- C. Rodrigues and A. R. Silva, “Active Shunts for the LNLS Storage Ring Quadrupoles”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN002, pp. 143-145.
- J. Galambos, “High Intensity Challenges at the Spallation Neutron Source”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper OPL01, pp. XX-XX.
- L. Hoummi et al., “Off-energy operation of a HMBA lattice”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA143, pp. 390-393.
- M. Chung, L. R. Prost, and V. D. Shiltsev, “Space-charge Compensation for High-intensity Linear and Circular Accelerators at Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBB1, pp. 402-404.
- S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873.
- Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 233-236.
- M. Boyes and T. A. Pelaia, “Introducing CAML II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper FRA001, pp. 922-924.
- S. Fleury, E. Todesco, M. Barberan Marin, and M. Bernardini, “HL-LHC magnet production: building a complex planning to identify bottlenecks”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS08, pp. 1645-1648.
Back to search