Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Lindberg, “Predicting collective dynamics and instabilities in storage ring light sources”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOZG2, unpublished.
[n] K. A. Brown et al., “IEEE 1394 Camera Imaging System for Brookhaven's Booster Application Facility Beam Diagnostics”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE111, pp. 551-553.
[n] T. W. Hall, J. T. M. Lyles, A. Poudel, and A. S. Waghmare, “Initial Results of the 201.25 MHz Coaxial Window Test Stand”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 458-461. doi:10.18429/JACoW-NAPAC2022-TUPA52
[n] M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1869-1872.
[n] R. Lindberg, “Coupled-bunch longitudinal instabilities with a harmonic cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3538-3541. doi:10.18429/JACoW-IPAC2023-WEPL180
[n] A. Burov, J. MacLachlan, J. Marriner, and S. Nagaitsev, “Design of Antiproton Electron Cooling in the Recycler”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP98, pp. 1707-1709.
[n] P. Lotrus et al., “EPICS Tools for Small Experiment Based on PLC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1556. doi:10.18429/JACoW-ICALEPCS2019-THAPP04
[n] E. Renner et al., “Optimised Transverse Painting Schemes for the New 160 MeV H⁻ Injection System at CERN”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 118-123. doi:10.18429/JACoW-HB2021-MOP19
[n] N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
[n] M. Bobrek, C. Deibele, and T. Allison, “Proton pulse charge calculation algorithm in Beam Power Limiting System at the Spallation Neutron Source”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD022, unpublished.
[n] A. Zelinsky, A. Cherkashin, and P. Gladkikh, “Modernization of the laser-optical system of the X-ray generator NESTOR”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 206-208. doi:10.18429/JACoW-IPAC2023-MOPA076
[n] J. P. Duke, D. J. S. Findlay, S. Hughes, P. Knight, and G. R. Murdoch, “Measurements of Beam Energy using the Gas Scattering System in the ISIS RFQ Test Stand”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE046, pp. 1876-1878.
[n] T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
[n] K. Kim, B. Hill, E. Williams, K. Kunnus, and P. C. O'Grady, “EPICS IOC development for high-speed and high-resolution imaging with the AXIS camera”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1746-1752. doi:10.18429/JACoW-ICALEPCS2025-THPD067
[n] K. Bishofberger et al., “Overview of the LAMP Conceptual Design”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4317, unpublished.
[n] Y. Alexahin et al., “Low Emittance Lattice for LEP”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA17, pp. 560-563.
[n] Z. X. Shao, Z. Dong, L. Wang, T. Zhang, and Z. R. Zhou, “Accelerator-Based High-Throughput Material Physical Property Measurement System in Terahertz Near-Field”, presented at the SAP'23, Xichang, China, Jul. 2023, paper MOPB024, unpublished.
[n] S. White et al., “Mini-beta optics for the European Synchrotron Radiation Facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3177-3180. doi:10.18429/JACoW-IPAC2023-WEPL029
[n] N. A. Stilin et al., “Status Update on CornellÔÇÖs SRF Compact Conduction Cooled Cryomodule”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1299-1302. doi:10.18429/JACoW-IPAC2022-TUPOTK037
[n] R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
[n] J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3357-3360.
[n] G. Strangolino and L. Zambon, “Pycumbia: Bridging high-performance control logic and Python simplicity for modern UIs”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1759-1763. doi:10.18429/JACoW-ICALEPCS2025-THPD076
[n] K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1830-1833.
[n] A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL060, unpublished.
[n] A. Trebushinin, G. Geloni, S. Serkez, and E. Saldin, “THz Undulator Source and Radiation Transport Through an Iris Line for Pump-Probe Experiments at FELs”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL040, unpublished.
[n] D. Calzolari et al., “Lattice and detector studies for the MDI of a 10 TeV muon collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 252-255. doi:10.18429/JACoW-IPAC2023-MOPA090
[n] R. Cappi, J. P. Delahaye, and K. H. Reich, “PS Beam Measurements at Flat-Top Fields near Transition Energy”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2389-2392.
[n] S. Bhattacharyya, R. K. Yedavalli, and A. Mukherjee, “Fast Beam Tuning for Accelerator Driven Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP081, pp. 2897-2899.
[n] X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 393-396.
[n] K. Hasegawa, “Summary of Working Group C+G (Part II)”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper FRAP04, pp. XX-XX.
[n] S. Rodriguez Esparza, I. Nesterenko, M. Hausmann, M. Patil, and S. Lidia, “Mechanical design of the thermal imaging system for the FRIB target”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2287-2290. doi:10.18429/JACoW-IPAC2024-WEPG36
[n] F. Lin et al., “Simulations of Nonlinear Beam Dynamics in the JLEIC Electron Collider Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 555-557. doi:10.18429/JACoW-NAPAC2016-TUPOB29
[n] J. Wei et al., “FRIB operations: first three years”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 1-7. doi:10.18429/JACoW-HIAT2025-MOX01
[n] P. Zhu et al., “The novel and robust design of fast protection system for CSNS-II”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1468-1472. doi:10.18429/JACoW-ICALEPCS2025-THMG002
[n] N. Vallis et al., “The PSI positron production project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1118-1121. doi:10.18429/JACoW-IPAC2024-TUPC50
[n] A. Will et al., “Design and Fabrication Concepts of a Compact Undulator with Laser-Structured 2G-HTS Tapes”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3851-3854. doi:10.18429/JACoW-IPAC2021-THPAB048
[n] A. Navitski, E. Elsen, B. Foster, A. L. Prudnikava, and Y. Tamashevich, “Surface Analyses and Optimization of Centrifugal Barrel Polishing of Nb Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB073, pp. 286-290.
[n] A. Jaikar, A. Tiradani, and B. Harrison, “Evaluate data lake design for the accelerator control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 742-747. doi:10.18429/JACoW-ICALEPCS2025-TUPD108
[n] F. Mako, L. Floyd, J. Golden, C. A. Kapetanakos, K. McDonald, and T. Smith, “Internal Injection into the NRL Modified Betatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3027-3030.
[n] S. Ye et al., “Efficient Slice Energy Spread Measurement Using Two Screens”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6617, unpublished.
[n] I. Dolenc Kittelmann et al., “Neutron Sensitive Beam Loss Monitoring System for the ESS Linac”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 131-135. doi:10.18429/JACoW-IBIC2019-MOPP022
[n] J. Heller, T. Flisgen, and U. van Rienen, “Computation of Wakefields and HOM Port Signals by Means of Reduced Order Models”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP092, pp. 364-366.
[n] N. Stilin et al., “Design and commissioning of a new SRF cavity for a conduction-cooled system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2987-2990. doi:10.18429/JACoW-IPAC2023-WEPA143
[n] P. Borchard and J. S. Hoh, “LCLS-II Average Current Monitor”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3443-3446. doi:10.18429/JACoW-IPAC2021-WEPAB329
[n] A. Seryi et al., “Vibration Stabilization of a Mechanical Model of a X-Band Linear Collider Final Focus Magnet”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP36, pp. 684-686.
[n] H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
[n] A. Cianchi, S. Fioravanti, and E. Pace, “SPARCbook: A New Electronic Book”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB16, pp. 638-640.
[n] K. E. Deitrick et al., “Technology Spinoff and Lessons Learned from the 4-Turn ERL CBETA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3762-3764. doi:10.18429/JACoW-IPAC2021-THPAB007
[n] S. Pioli et al., “Novel FPGA-Based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1624. doi:10.18429/JACoW-ICALEPCS2019-THCPR01
[n] M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1958-1960. doi:10.18429/JACoW-IPAC2019-TUPTS012
[n] Y. Han, L. Ma, A. Latina, and D. Schulte, “Beam-Based Alignment for the Rebaselining of CLIC RTML”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1939-1942. doi:10.18429/JACoW-IPAC2017-TUPIK099
[n] D. C. Larbalestier and P. J. Lee, “New Developments in Niobium Titanium Superconductors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE01, pp. 1276-1281.
[n] I. Roth, M. P. J. Gaudreau, M. K. Kempkes, N. Silverman, and R. E. Simpson, “ESS Klystron Production Test Stand”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4074-4075. doi:10.18429/JACoW-IPAC2019-THPRB105
[n] F. Nolden et al., “Heavy Ion Beam Accumulation, Cooling, and Experiments at the ESR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1645-1650.
[n] K. V. Astrelina and F. A. Emanov, “Consideration the Prospects of Beam Diagnostic System Upgrade in the Transport Channels of Injection Complex VEPP-5”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 860-862. doi:10.18429/JACoW-IPAC2021-MOPAB272
[n] A. Abramov, G. Broggi, K. André, M. Hofer, R. Bruce, and S. Redaelli, “Studies of layout and cleaning performance for the FCC-ee collimation system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 356-359. doi:10.18429/JACoW-IPAC2023-MOPA128
[n] W. Chang et al., “Cryomodule operation experience for the FRIB continuous-wave superconducting linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 302-305. doi:10.18429/JACoW-LINAC2024-TUAA006
[n] F. Ji, “Ultrafast Relativistic Nanoprobes”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA2, unpublished.
[n] O. C. Dermois, A. M. Van Den Berg, and H. K. T. Van Der Molen, “Fringefield Effects in Short Quadrupoles”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-15, pp. 226-229.
[n] S. Reimann et al., “FAIR commissioning - Towards first science”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2495-2498. doi:10.18429/JACoW-IPAC2025-THBN2
[n] S. P. Weathersby et al., “Commissioning the Echo-Seeding Experiment ECHO-7 at SLAC”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOA3, pp. 336-339.
[n] K. Skoufaris, Y. Papaphilippou, and D. Pellegrini, “Ultra Compact Symplectic Scheme for Fast Multi-Particle Tracking”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3107-3110. doi:10.18429/JACoW-IPAC2018-THPAF059
[n] M. Pont, “Magnet System Design for the Storage Ring of the LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP124G, pp. 2207-2209.
[n] G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1699-1702. doi:10.18429/JACoW-IPAC2023-TUPA171
[n] G. Broggi, A. Abramov, and R. Bruce, “Beam dynamics studies for the FCC-ee collimation system design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 360-363. doi:10.18429/JACoW-IPAC2023-MOPA129
[n] T. Prebibaj et al., “Intensity reach in the CERN PSB with the high-current LINAC4 source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1706-1709. doi:10.18429/JACoW-IPAC2024-TUPS31
For LaTeX
Use Complete Form
For BibTeX
References
- R. Lindberg, “Predicting collective dynamics and instabilities in storage ring light sources”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOZG2, unpublished.
- K. A. Brown et al., “IEEE 1394 Camera Imaging System for Brookhaven's Booster Application Facility Beam Diagnostics”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE111, pp. 551-553.
- T. W. Hall, J. T. M. Lyles, A. Poudel, and A. S. Waghmare, “Initial Results of the 201.25 MHz Coaxial Window Test Stand”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 458-461.
- M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1869-1872.
- R. Lindberg, “Coupled-bunch longitudinal instabilities with a harmonic cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL180, pp. 3538-3541.
- A. Burov, J. MacLachlan, J. Marriner, and S. Nagaitsev, “Design of Antiproton Electron Cooling in the Recycler”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP98, pp. 1707-1709.
- P. Lotrus et al., “EPICS Tools for Small Experiment Based on PLC”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1556.
- E. Renner et al., “Optimised Transverse Painting Schemes for the New 160 MeV H⁻ Injection System at CERN”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper MOP19, pp. 118-123.
- N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
- M. Bobrek, C. Deibele, and T. Allison, “Proton pulse charge calculation algorithm in Beam Power Limiting System at the Spallation Neutron Source”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD022, unpublished.
- A. Zelinsky, A. Cherkashin, and P. Gladkikh, “Modernization of the laser-optical system of the X-ray generator NESTOR”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA076, pp. 206-208.
- J. P. Duke, D. J. S. Findlay, S. Hughes, P. Knight, and G. R. Murdoch, “Measurements of Beam Energy using the Gas Scattering System in the ISIS RFQ Test Stand”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE046, pp. 1876-1878.
- T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
- K. Kim, B. Hill, E. Williams, K. Kunnus, and P. C. O'Grady, “EPICS IOC development for high-speed and high-resolution imaging with the AXIS camera”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1746-1752.
- K. Bishofberger et al., “Overview of the LAMP Conceptual Design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4317, this conference.
- Y. Alexahin et al., “Low Emittance Lattice for LEP”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA17, pp. 560-563.
- Z. X. Shao, Z. Dong, L. Wang, T. Zhang, and Z. R. Zhou, “Accelerator-Based High-Throughput Material Physical Property Measurement System in Terahertz Near-Field”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper MOPB024, unpublished.
- S. White et al., “Mini-beta optics for the European Synchrotron Radiation Facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL029, pp. 3177-3180.
- N. A. Stilin et al., “Status Update on CornellÔÇÖs SRF Compact Conduction Cooled Cryomodule”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1299-1302.
- R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
- J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3357-3360.
- G. Strangolino and L. Zambon, “Pycumbia: Bridging high-performance control logic and Python simplicity for modern UIs”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1759-1763.
- K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1830-1833.
- A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL060, unpublished.
- A. Trebushinin, G. Geloni, S. Serkez, and E. Saldin, “THz Undulator Source and Radiation Transport Through an Iris Line for Pump-Probe Experiments at FELs”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL040, unpublished.
- D. Calzolari et al., “Lattice and detector studies for the MDI of a 10 TeV muon collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA090, pp. 252-255.
- R. Cappi, J. P. Delahaye, and K. H. Reich, “PS Beam Measurements at Flat-Top Fields near Transition Energy”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2389-2392.
- S. Bhattacharyya, R. K. Yedavalli, and A. Mukherjee, “Fast Beam Tuning for Accelerator Driven Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP081, pp. 2897-2899.
- X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 393-396.
- K. Hasegawa, “Summary of Working Group C+G (Part II)”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper FRAP04, pp. XX-XX.
- S. Rodriguez Esparza, I. Nesterenko, M. Hausmann, M. Patil, and S. Lidia, “Mechanical design of the thermal imaging system for the FRIB target”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG36, pp. 2287-2290.
- F. Lin et al., “Simulations of Nonlinear Beam Dynamics in the JLEIC Electron Collider Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 555-557.
- J. Wei et al., “FRIB operations: first three years”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOX01, pp. 1-7.
- P. Zhu et al., “The novel and robust design of fast protection system for CSNS-II”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1468-1472.
- N. Vallis et al., “The PSI positron production project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC50, pp. 1118-1121.
- A. Will et al., “Design and Fabrication Concepts of a Compact Undulator with Laser-Structured 2G-HTS Tapes”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3851-3854.
- A. Navitski, E. Elsen, B. Foster, A. L. Prudnikava, and Y. Tamashevich, “Surface Analyses and Optimization of Centrifugal Barrel Polishing of Nb Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB073, pp. 286-290.
- A. Jaikar, A. Tiradani, and B. Harrison, “Evaluate data lake design for the accelerator control system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 742-747.
- F. Mako, L. Floyd, J. Golden, C. A. Kapetanakos, K. McDonald, and T. Smith, “Internal Injection into the NRL Modified Betatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3027-3030.
- S. Ye et al., “Efficient Slice Energy Spread Measurement Using Two Screens”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6617, this conference.
- I. Dolenc Kittelmann et al., “Neutron Sensitive Beam Loss Monitoring System for the ESS Linac”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 131-135.
- J. Heller, T. Flisgen, and U. van Rienen, “Computation of Wakefields and HOM Port Signals by Means of Reduced Order Models”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP092, pp. 364-366.
- N. Stilin et al., “Design and commissioning of a new SRF cavity for a conduction-cooled system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA143, pp. 2987-2990.
- P. Borchard and J. S. Hoh, “LCLS-II Average Current Monitor”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3443-3446.
- A. Seryi et al., “Vibration Stabilization of a Mechanical Model of a X-Band Linear Collider Final Focus Magnet”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP36, pp. 684-686.
- H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
- A. Cianchi, S. Fioravanti, and E. Pace, “SPARCbook: A New Electronic Book”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB16, pp. 638-640.
- K. E. Deitrick et al., “Technology Spinoff and Lessons Learned from the 4-Turn ERL CBETA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3762-3764.
- S. Pioli et al., “Novel FPGA-Based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1624.
- M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1958-1960.
- Y. Han, L. Ma, A. Latina, and D. Schulte, “Beam-Based Alignment for the Rebaselining of CLIC RTML”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1939-1942.
- D. C. Larbalestier and P. J. Lee, “New Developments in Niobium Titanium Superconductors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE01, pp. 1276-1281.
- I. Roth, M. P. J. Gaudreau, M. K. Kempkes, N. Silverman, and R. E. Simpson, “ESS Klystron Production Test Stand”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4074-4075.
- F. Nolden et al., “Heavy Ion Beam Accumulation, Cooling, and Experiments at the ESR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1645-1650.
- K. V. Astrelina and F. A. Emanov, “Consideration the Prospects of Beam Diagnostic System Upgrade in the Transport Channels of Injection Complex VEPP-5”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 860-862.
- A. Abramov, G. Broggi, K. André, M. Hofer, R. Bruce, and S. Redaelli, “Studies of layout and cleaning performance for the FCC-ee collimation system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA128, pp. 356-359.
- W. Chang et al., “Cryomodule operation experience for the FRIB continuous-wave superconducting linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 302-305.
- F. Ji, “Ultrafast Relativistic Nanoprobes”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper TUYBA2, unpublished.
- O. C. Dermois, A. M. Van Den Berg, and H. K. T. Van Der Molen, “Fringefield Effects in Short Quadrupoles”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-15, pp. 226-229.
- S. Reimann et al., “FAIR commissioning - Towards first science”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THBN2, pp. 2495-2498.
- S. P. Weathersby et al., “Commissioning the Echo-Seeding Experiment ECHO-7 at SLAC”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOA3, pp. 336-339.
- K. Skoufaris, Y. Papaphilippou, and D. Pellegrini, “Ultra Compact Symplectic Scheme for Fast Multi-Particle Tracking”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3107-3110.
- M. Pont, “Magnet System Design for the Storage Ring of the LSB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP124G, pp. 2207-2209.
- G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA171, pp. 1699-1702.
- G. Broggi, A. Abramov, and R. Bruce, “Beam dynamics studies for the FCC-ee collimation system design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA129, pp. 360-363.
- T. Prebibaj et al., “Intensity reach in the CERN PSB with the high-current LINAC4 source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS31, pp. 1706-1709.
Back to search