Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. DiMonte, “Modernizing the RF control systems at the Advanced Photon Source”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 498-502. doi:10.18429/JACoW-ICALEPCS2025-TUPD001
[n] M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 34-36. doi:10.18429/JACoW-NAPAC2022-MOZD4
[n] M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
[n] L. Schrettner et al., “Control System Development and Integration at ELI-ALPS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 881. doi:10.18429/JACoW-ICALEPCS2019-WEBPP01
[n] T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3003-3005. doi:10.18429/JACoW-IPAC2023-WEPA149
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 198-200. doi:10.18429/JACoW-NAPAC2016-MOPOB58
[n] Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
[n] Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
[n] G. Penn, M. Reinsch, and J. Wurtele, “Analytic Model of Harmonic Generation in the Low-Gain FEL Regime”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS57, pp. XX-XX.
[n] D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
[n] Y. Shoji, S. Hashimoto, A. Ando, N. Kumagai, H. Ohkuma, and M. Oishi, “Upgrading of a Vacuum System of the NewSUBARU Storage Ring : Design and Effect”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14007, pp. XX-XX.
[n] C. H. Kim, “Performance of the ALS Injection System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2036-2039.
[n] D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
[n] C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2779-2781. doi:10.18429/JACoW-IPAC2024-WEPS39
[n] Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
[n] M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3729-3731. doi:10.18429/JACoW-IPAC2018-THPAL040
[n] K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1513-1515. doi:10.18429/JACoW-IPAC2018-TUPMK011
[n] M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
[n] M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1394-1396. doi:10.18429/JACoW-IPAC2015-TUPWA002
[n] M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 258-260. doi:10.18429/JACoW-MEDSI2018-WEPH24
[n] G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
[n] F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1220-1223. doi:10.18429/JACoW-IPAC2024-TUPG02
[n] W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
[n] A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 243-246.
[n] C. Gough et al., “The SLS Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
[n] J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
For LaTeX
Use Complete Form
For BibTeX
References
- N. DiMonte, “Modernizing the RF control systems at the Advanced Photon Source”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 498-502.
- M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 34-36.
- M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
- L. Schrettner et al., “Control System Development and Integration at ELI-ALPS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 881.
- T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA149, pp. 3003-3005.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 198-200.
- Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
- Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
- G. Penn, M. Reinsch, and J. Wurtele, “Analytic Model of Harmonic Generation in the Low-Gain FEL Regime”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS57, pp. XX-XX.
- D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
- Y. Shoji, S. Hashimoto, A. Ando, N. Kumagai, H. Ohkuma, and M. Oishi, “Upgrading of a Vacuum System of the NewSUBARU Storage Ring : Design and Effect”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14007, pp. XX-XX.
- C. H. Kim, “Performance of the ALS Injection System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2036-2039.
- D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
- C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS39, pp. 2779-2781.
- Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
- M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3729-3731.
- K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1513-1515.
- M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
- M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1394-1396.
- M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 258-260.
- G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
- F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG02, pp. 1220-1223.
- W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
- A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
- J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 243-246.
- C. Gough et al., “The SLS Booster Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
- J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
Back to search