Favourites
For Word
[n] K. Dewhurst, D. Mirarchi, M. Patecki, M. D'Andrea, P. Hermes, and S. Redaelli, “Performance of a double-crystal setup for LHC fixed-target experiments”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 650-653. doi:10.18429/JACoW-IPAC2023-MOPL048
[n] N. Fukunishi, “Heavy-ion Cyclotron Gymnastics and Associated Beam Dynamics Issues”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOZLR09, pp. 18-23.
[n] H. Imao, “A charge stripper ring for RIKEN RI Beam Factory”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 298-303. doi:10.18429/JACoW-HIAT2025-FRX01
[n] M. Kuriki et al., “Beam loading compensation of traveling wave LINAC to a multi-bunch pulse with gaps”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 796-799. doi:10.18429/JACoW-IPAC2023-MOPL100
[n] K. Dewhurst, C. Maccani, M. D'Andrea, P. Hermes, D. Mirarchi, and S. Redaelli, “Predicting the multi-turn channelling efficiency of a 7 mrad-bending silicon crystal in the Large Hadron Collider for TeV-range proton energies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1144-1147. doi:10.18429/JACoW-IPAC2024-TUPC64
[n] X. Pei, W. Li, and B. Zhang, “Preliminary design of the magnet girder for the HALF storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB065, unpublished.
[n] M. Kinsho, J. Kusano, F. Masukawa, N. Ogiwara, O. Takeda, and K. Yamamoto, “Gamma-Ray Irradiation Experiments of Collimator Key Components for the 3GeV-RCS of J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE012, pp. 1309-1311.
[n] K. Dewhurst, F. Van der Veken, P. Hermes, D. Mirarchi, and S. Redaelli, “Calculating the channelling efficiency of bent silicon crystals using two particle simulation programs: SixTrack and Xsuite”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1148-1151. doi:10.18429/JACoW-IPAC2024-TUPC65
[n] A. Uchiyama, K. Yamada, M. Komiyama, and N. Fukunishi, “Development of EPICS device support on the MELSEC iQ-R embedded Linux controller”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 728-732. doi:10.18429/JACoW-ICALEPCS2025-TUPD100
[n] M. Ehrlichman, “Accelerator-based lithography and the Induction Storage Ring Light Source”, presented at the IPAC'26, Deauville, France, May 2026, paper WEI8M01, unpublished.
[n] K. Yamamoto and M. Kinsho, “Development of the Collimator System for the 3GEV Rapid Cycling Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE013, pp. 1365-1367.
[n] F.-J. Decker, C. Adolphsen, D. Cesar, M. Ehrlichman, and A. Halavanau, “RF kicks in the Super Conducting Linac of LCLS-II”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2332, unpublished.
[n] E. Fagotti et al., “Upgrade of the heavy ion accelerator complex at INFN-LNL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2198-2201. doi:10.18429/JACoW-IPAC2023-TUPM004
[n] K. Kaneko and A. Uchiyama, “Utilization of remote monitoring tools in the long-term operation of the superconducting linac at RIKEN”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 762-766. doi:10.18429/JACoW-SRF2025-THP65
[n] B. Lindstrom, R. Bruce, P. Hermes, and S. Redaelli, “Update on the High Luminosity LHC collimation performance with proton beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 348-351. doi:10.18429/JACoW-IPAC2023-MOPA126
[n] T. Nishi et al., “Beam Acceleration with the Upgraded Riken Heavy-Ion Linac”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 231-234. doi:10.18429/JACoW-HB2021-THBC1
[n] Y. Kim, M. Kuriki, Y. W. Parc, and Z. Liptak, “Report on an international accelerator school - ISBA23”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2500-2503. doi:10.18429/JACoW-IPAC2024-WEPR16
[n] H. Xu et al., “Final design of CARIE photoinjector cavity with plug insert”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1027-1030. doi:10.18429/JACoW-NAPAC2025-THP035
[n] T. Natsui, Y. Okayasu, and M. Satoh, “Upgrade of KEK electron/positron injector LINAC using pulsed magnets and machine learning”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1651-1655. doi:10.18429/JACoW-IPAC2025-WEXN1
For LaTeX
Use Complete Form
For BibTeX
References
- K. Dewhurst, D. Mirarchi, M. Patecki, M. D'Andrea, P. Hermes, and S. Redaelli, “Performance of a double-crystal setup for LHC fixed-target experiments”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL048, pp. 650-653.
- N. Fukunishi, “Heavy-ion Cyclotron Gymnastics and Associated Beam Dynamics Issues”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOZLR09, pp. 18-23.
- H. Imao, “A charge stripper ring for RIKEN RI Beam Factory”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRX01, pp. 298-303.
- M. Kuriki et al., “Beam loading compensation of traveling wave LINAC to a multi-bunch pulse with gaps”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL100, pp. 796-799.
- K. Dewhurst, C. Maccani, M. D'Andrea, P. Hermes, D. Mirarchi, and S. Redaelli, “Predicting the multi-turn channelling efficiency of a 7 mrad-bending silicon crystal in the Large Hadron Collider for TeV-range proton energies”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC64, pp. 1144-1147.
- X. Pei, W. Li, and B. Zhang, “Preliminary design of the magnet girder for the HALF storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB065, unpublished.
- M. Kinsho, J. Kusano, F. Masukawa, N. Ogiwara, O. Takeda, and K. Yamamoto, “Gamma-Ray Irradiation Experiments of Collimator Key Components for the 3GeV-RCS of J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE012, pp. 1309-1311.
- K. Dewhurst, F. Van der Veken, P. Hermes, D. Mirarchi, and S. Redaelli, “Calculating the channelling efficiency of bent silicon crystals using two particle simulation programs: SixTrack and Xsuite”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC65, pp. 1148-1151.
- A. Uchiyama, K. Yamada, M. Komiyama, and N. Fukunishi, “Development of EPICS device support on the MELSEC iQ-R embedded Linux controller”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 728-732.
- M. Ehrlichman, “Accelerator-based lithography and the Induction Storage Ring Light Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEI8M01, this conference.
- K. Yamamoto and M. Kinsho, “Development of the Collimator System for the 3GEV Rapid Cycling Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE013, pp. 1365-1367.
- F.-J. Decker, C. Adolphsen, D. Cesar, M. Ehrlichman, and A. Halavanau, “RF kicks in the Super Conducting Linac of LCLS-II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2332, this conference.
- E. Fagotti et al., “Upgrade of the heavy ion accelerator complex at INFN-LNL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM004, pp. 2198-2201.
- K. Kaneko and A. Uchiyama, “Utilization of remote monitoring tools in the long-term operation of the superconducting linac at RIKEN”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 762-766.
- B. Lindstrom, R. Bruce, P. Hermes, and S. Redaelli, “Update on the High Luminosity LHC collimation performance with proton beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA126, pp. 348-351.
- T. Nishi et al., “Beam Acceleration with the Upgraded Riken Heavy-Ion Linac”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper THBC1, pp. 231-234.
- Y. Kim, M. Kuriki, Y. W. Parc, and Z. Liptak, “Report on an international accelerator school - ISBA23”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR16, pp. 2500-2503.
- H. Xu et al., “Final design of CARIE photoinjector cavity with plug insert”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1027-1030.
- T. Natsui, Y. Okayasu, and M. Satoh, “Upgrade of KEK electron/positron injector LINAC using pulsed magnets and machine learning”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEXN1, pp. 1651-1655.
Back to search