Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
[n] G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
[n] A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
[n] J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
[n] S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
[n] G. Ryckewaert, M. Loiselet, and N. Postiau, “Radioactive Ion Beam Production Using the Louvain-La-Neuve Cyclotrons: Present Status and Future Developments”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIII-06, pp. 737-740.
[n] S. Chattopadhyay et al., “Design of a Superconducting Linear Accelerator for an Infrared Free Electron Laser of the Proposed Chemical Dynamics Research Laboratory at LBL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-38, pp. 404-406.
[n] D. Rabusov, R. Fielder, and I. Martin, “Analysis of coupled-bunch instabilities in Diamond-II”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2388-2390. doi:10.18429/JACoW-IPAC2025-WEPS070
[n] R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Mu*STAR Accelerator-Driven Subcritical Reactors Burning Spent Nuclear Fuel at Light-Water-Reactor Sites”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 524-526. doi:10.18429/JACoW-IPAC2018-MOPML053
[n] S. Park et al., “Status of RF Photoinjector and PWT Linac at UCLA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-75, pp. 528-530.
[n] M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1666-1669. doi:10.18429/JACoW-ICALEPCS2017-THPHA123
[n] K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 15-20. doi:10.18429/JACoW-IPAC2023-MOYD2
[n] R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
[n] C. M. Gulliford, A. C. Bartnik, J. S. Berg, J. Dobbins, A. Nunez-delPrado, and D. Sagan, “Experience With CBETA Online Modeling Tools”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 196-201. doi:10.18429/JACoW-ICAP2018-TUPAF10
[n] S. A. Heifets and S. A. Kheifets, “High-Frequency Limit of the Longitudinal Impedance of an Array of Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 705-708.
[n] R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
[n] P. Bertrand and Ch. Ricaud, “Specific Cyclotron Correlations Under Space Charge Effects in the Case of a Spherical Beam”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-3, pp. XX-XX.
[n] B. G. Chidley, G. M. Arbique, M. S. de Jong, G. E. McMichael, W. L. Michel, and B. H. Smith, “RFQ1 Diagnostic Devices”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU455, pp. 459-461.
[n] B. Salvant et al., “Building the Impedance Model of a Real Machine”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2249-2254. doi:10.18429/JACoW-IPAC2019-WEYPLS1
[n] M. S. de Jong et al., “A 2856 MHz RF Cavity for the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 832-835.
[n] G. P. Lawrence, T. D. Hayward, and J. A. Jackson, “A Prototype High Current, High Duty Factor Negative Hydrogen Ion Source for LAMPF”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1640-1643.
[n] J. E. Griffin, V. Bharadwaj, J. A. MacLachlan, J. E. Misek, and A. Moretti, “Fabrication and Operation of the 4 MV 53 MHz RF System for the Fermilab Antiproton Source Debuncher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2806-2809.
[n] P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
[n] J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-03, pp. 319-322.
[n] C. Barue et al., “CYCLONE44: a Radioactive Ion Beam Postaccelerator-Mass Separator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04F, pp. 544-546.
[n] A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1646-1648. doi:10.18429/JACoW-ICALEPCS2017-THPHA114
[n] J. Noonan, T. L. Smith, M. Virgo, G. J. Waldschmidt, and J. W. Lewellen, “Cage Cavity: A Low Cost, High Performance SRF Accelerating Structure”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP026, pp. 950-954.
[n] P. B. Wilson, “Development and Advances in Conventional High Power RF Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE04, pp. 1483-1488.
[n] R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1916-1919.
[n] H. G. Hereward, P. L. Morton, and K. H. Schindl, “The Effect of Ions on the Symmetrical Throbbing Beam Mode”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 180-182.
[n] A. Ratti, J. Staples, L. Doolittle, D. Oshatz, and T. Goulding, “SNS Front End Diagnostics”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC12, pp. 175-177.
[n] C. Nantista, C. Adolphsen, R. L. Brown, R. Fuller, and J. Rifkin, “Beam Profile Monitors in the NLCTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P061, pp. 2186-2188.
[n] R. Perry, “An Extended RF Ion Source with Small Phase Space Emittance Area”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-3, pp. 474-479.
[n] H. Ludewig et al., “Collimator Systems for the SNS Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCR4, pp. 548-550.
[n] A. Joubert, “Status Report on the First Six Years of GANIL Operation”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-06, pp. 101-105.
[n] F. Amman, J. M. Paterson, A. M. Sessler, and B. Zotter, “DISCUSSION: The 'Head-Tail' Instability”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 851-852.
[n] V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
[n] S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
[n] C. Adolphsen et al., “Processing Studies of X-Band Accelerator Structures at the NLCTA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA003, pp. 478-480.
[n] S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n] F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n] A. J. Jason et al., “Beam-Distribution System for Multi-Axis Imaging at the Advanced Hydrotest Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH065, pp. 3374-3376.
[n] K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 992-994. doi:10.18429/JACoW-ICALEPCS2015-WEPGF122
[n] J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
[n] P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
[n] D. Rees, J. L. Erickson, R. W. Garnett, J. T. M. Lyles, and L. Rybarcyk, “LANSCE RF System Improvements for Current and Future Programs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC068, pp. 238-240.
[n] G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 685-690.
[n] J. Crone et al., “Simulation of longitudinal phase space measurements for the RUEDI ultrafast electron diffraction beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3060-3063. doi:10.18429/JACoW-IPAC2024-THPC33
[n] T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1328-1331. doi:10.18429/JACoW-IPAC2023-TUODB1
[n] K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
[n] R. M. Jones and P. B. Wilson, “Minimizing RF System Costs in a Linear Collider by an Optimized Choice of Beam and Structure Parameters”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W012, pp. 545-547.
[n] W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
[n] S. Zelazny et al., “Multi-Device Knob Utility for LCLS at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP023, pp. 134-136.
[n] C. S. Robinson, A. O. Hanson, and D. Jamnik, “Computer Studies of Orbits in High Energy Microtrons”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 624-630.
[n] V. Kamerdzhiev, C. B?Âhme, J. Dietrich, P. Forck, T. Giacomini, and D. A. Liakin, “Beam Test of the FAIR IPM Prototype in COSY”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB12, pp. 191-193.
[n] J. A. Clarke and G. S. Dobbing, “Commissioning of the New Multipole Wigglers in the SRS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA17, pp. 2653-2655.
[n] M. Popovic et al., “Innovative Magnetron Power Sources for SRF Linacs”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 473-475. doi:10.18429/JACoW-LINAC2022-TUPOPA30
[n] A. Fisher, P. Gilad, F. Goldin, and N. Rostoker, “Studies of an Unneutral Electron Cloud in the CFIA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3383-3386.
[n] G. Cox et al., “Status of the CLARA Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1517-1521. doi:10.18429/JACoW-ICALEPCS2017-THPHA063
[n] T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2284-2286.
[n] I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
[n] R. L. Ives et al., “200 kW, 350 - 700 MHz RF Sources using Multiple Beam Triodes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 724-726. doi:10.18429/JACoW-NAPAC2019-WEPLM57
[n] L. Hendrickson, N. Phinney, A. Seryi, P. Tenenbaum, and M. Woodley, “Beam-based Feedback for the NLC Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT157, pp. 2828-2830.
[n] M. Cavellier, “A New Process for Nitrogen Doping of Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 276. doi:10.18429/JACoW-SRF2021-MOPCAV009
[n] N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
[n] T. Taylor and J. S. C. Wills, “Enhanced High-Current ECR Proton Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-20, pp. 350-352.
[n] R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1402-1405.
[n] K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
[n] M. Tomizawa et al., “Status and Upgrade Plan of Slow Extraction from the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB014, pp. 3912-3914.
[n] K. Takayama, T. Adachi, W. Jiang, Y. Oguri, and H. Tsutsui, “Induction Sector Cyclotron for Cluster Ions”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUA2CCO02, pp. 314-316.
[n] N. Bongers et al., “Expertsystem for COSY - Control”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1126-1129.
[n] M. Carl?á, H. Bartosik, M. S. Beck, K. S. B. Li, and M. Schenk, “Studies of a New Optics With Intermediate Transition Energy as Alternative for High Intensity LHC Beams in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 713-716. doi:10.18429/JACoW-IPAC2018-TUPAF022
[n] T. Matsuzawa et al., “Invited Paper: Current and Future Aspects of Cancer Diagnosis with Positron Emission Tomography”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-03, pp. 597-601.
[n] K. Ko, H. Hoag, T. Lee, and S. Tantawi, “X-Band High Power Dry Load for NLCTA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ05, pp. 1726-1728.
[n] R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 83-85. doi:10.18429/JACoW-ECRIS2016-WEPP01
[n] M. Carl?á et al., “Transverse Beam Dynamics Studies With High Intensity LHC Beams in the SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1062-1065. doi:10.18429/JACoW-IPAC2019-MOPTS089
[n] A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 479-482.
[n] C. Carli, M. Aiba, M. Chanel, B. Goddard, M. Martini, and W. J. M. Weterings, “Lattice Issues of the CERN PSB with H- Charge Exchange Injection Hardware”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP036, pp. 3781-3783.
[n] E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1653-1656.
[n] M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2958-2961.
[n] S. Pauliuk et al., “A Fast Switching Mirror Chamber for FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC027, pp. 124-126.
[n] J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3231-3234.
[n] L. Bertolini et al., “Interaction Region Design at the PEP-II B Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP125G, pp. 460-462.
[n] R. J. Abrams, M. A. Cummings, V. G. Dudnikov, R. P. Johnson, and M. Popovic, “Residual-Gas Beam Profile Monitors for Intense Beams in Transfer Lines”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 469-472. doi:10.18429/JACoW-IPAC2017-MOPAB144
[n] P. B. Wilson, K. L. F. Bane, and J. B. Styles, “Comparison of Measured and Computed Loss to Parasitic Modes in Cylindrical Cavities with Beam Ports”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1496-1499.
[n] K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
[n] M. A. Allen, M. J. Lee, and P. L. Morton, “Synchrotron Frequency Spliting in the SLAC Storage Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1084-1086.
[n] Y. Jongen et al., “Design Studies of the Compact Superconducting Cyclotron for Hadron Therapy”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS078, pp. 1678-1680.
[n] M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
[n] R. Chasman and G. A. Voss, “Isabelle e-p Option”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 777-782.
[n] D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
[n] P. Brown, H. Frischholz, G. Geschonke, H. Henke, and I. Wilson, “Development and First Results with a Storage Resonator Enhancing the Shunt Impedance of an Electron Accelerating Cavity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2707-2711.
[n] S. Hancock, M. Benedikt, and C. Carli, “An RF Scenario for Protons and Ions in the PS2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP055, pp. 1406-1408.
[n] V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 206-212. doi:10.18429/JACoW-ICALEPCS2017-TUBPA04
[n] A. Gerhard et al., “RF Sparking in Accelerator Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1108-1111.
[n] S. Isagawa et al., “Operational Experience and Recent Upgrading of TRISTAN High Power CW Klystrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1206-1209.
[n] M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3032-3035. doi:10.18429/JACoW-IPAC2018-THPAF034
[n] A. Masi et al., “SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1179-1186. doi:10.18429/JACoW-ICALEPCS2023-TH2BCO04
[n] A. Denker et al., “New Time Structures Available at the HZB Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 130-132. doi:10.18429/JACoW-Cyclotrons2016-TUA03
[n] J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3234-3237.
[n] M. J. Lee, F. E. Mills, and P. L. Morton, “Throbbing Beam Instabilities in Particle Accelerators and Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 602-607.
[n] K. L. F. Bane, C. Adolphsen, K. Kubo, and K. A. Thompson, “Issues in Multi-bunch Emittance Preservation in the NLC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1114-1117.
[n] A. Yeremian, J. Adamski, and D. Shoffstall, “Computer-Automated Linac Diagnostics and Data Acquisition”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2279-2281.
[n] F. Amman, “Beam-Beam Limits”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 858-862.
[n] M. Sachwitz et al., “A Fast Switching Mirror Unit at FLASH”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP061, pp. 1223-1225.
[n] C. Pagani et al., “A High-Current Superconducting Proton Linac for an Accelerator-Driven Transmutation System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W037, pp. 1126-1128.
[n] P. A. Maslov, K. A. Meyer, and K. Zagar, “TestBed - Automated Hardware-in-the-Loop Test Framework”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO303, pp. 150-151.
[n] F. Zimmermann, O. S. Br??ning, and M. Klein, “The LHeC as a Higgs Boson Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO054, pp. 1017-1019.
[n] A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n] A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 240-243. doi:10.18429/JACoW-IPAC2022-MOPOPT006
[n] E. Henestroza, S. Heifets, and M. Zolotorev, “Trapped Modes in the PEP-II B-Factory Interaction Region”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC08, pp. 2333-2335.
[n] X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
[n] O. Rahman et al., “High average current DC electron gun for strong hadron cooling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2053-2056. doi:10.18429/JACoW-IPAC2024-WEPC41
[n] A. Hardt, S. A. Martin, R. Wagner, and C. A. Wiedner, “Extraction Beam Lines for COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1481-1484.
[n] M. S. de Jong et al., “Design of a Tuner and Adjustable RF Coupler for a CW 2856 MHz RF Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 829-832.
[n] A. M. Sessler, “New Techniques for Particle Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 308-314.
[n] J. Serrano et al., “The White Rabbit Project”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUC004, pp. 93-95.
[n] F. S. Felber et al., “Relativistic Injection into a High-Current Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2781-2784.
[n] N. T. Rider et al., “Development of an X-Ray Beam Size Monitor with Single Pass Measurement Capability for CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP304, pp. 687-689.
[n] M. Ladeuze et al., “Control Systems for Ion Beam Applications Baby Cyclotrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 827-830.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
- G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
- A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
- J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
- S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
- G. Ryckewaert, M. Loiselet, and N. Postiau, “Radioactive Ion Beam Production Using the Louvain-La-Neuve Cyclotrons: Present Status and Future Developments”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XIII-06, pp. 737-740.
- S. Chattopadhyay et al., “Design of a Superconducting Linear Accelerator for an Infrared Free Electron Laser of the Proposed Chemical Dynamics Research Laboratory at LBL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-38, pp. 404-406.
- D. Rabusov, R. Fielder, and I. Martin, “Analysis of coupled-bunch instabilities in Diamond-II”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS070, pp. 2388-2390.
- R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Mu*STAR Accelerator-Driven Subcritical Reactors Burning Spent Nuclear Fuel at Light-Water-Reactor Sites”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 524-526.
- S. Park et al., “Status of RF Photoinjector and PWT Linac at UCLA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-75, pp. 528-530.
- M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1666-1669.
- K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOYD2, pp. 15-20.
- R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
- C. M. Gulliford, A. C. Bartnik, J. S. Berg, J. Dobbins, A. Nunez-delPrado, and D. Sagan, “Experience With CBETA Online Modeling Tools”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 196-201.
- S. A. Heifets and S. A. Kheifets, “High-Frequency Limit of the Longitudinal Impedance of an Array of Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 705-708.
- R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
- P. Bertrand and Ch. Ricaud, “Specific Cyclotron Correlations Under Space Charge Effects in the Case of a Spherical Beam”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-3, pp. XX-XX.
- B. G. Chidley, G. M. Arbique, M. S. de Jong, G. E. McMichael, W. L. Michel, and B. H. Smith, “RFQ1 Diagnostic Devices”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU455, pp. 459-461.
- B. Salvant et al., “Building the Impedance Model of a Real Machine”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2249-2254.
- M. S. de Jong et al., “A 2856 MHz RF Cavity for the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 832-835.
- G. P. Lawrence, T. D. Hayward, and J. A. Jackson, “A Prototype High Current, High Duty Factor Negative Hydrogen Ion Source for LAMPF”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1640-1643.
- J. E. Griffin, V. Bharadwaj, J. A. MacLachlan, J. E. Misek, and A. Moretti, “Fabrication and Operation of the 4 MV 53 MHz RF System for the Fermilab Antiproton Source Debuncher Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2806-2809.
- P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
- J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper C-03, pp. 319-322.
- C. Barue et al., “CYCLONE44: a Radioactive Ion Beam Postaccelerator-Mass Separator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04F, pp. 544-546.
- A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1646-1648.
- J. Noonan, T. L. Smith, M. Virgo, G. J. Waldschmidt, and J. W. Lewellen, “Cage Cavity: A Low Cost, High Performance SRF Accelerating Structure”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP026, pp. 950-954.
- P. B. Wilson, “Development and Advances in Conventional High Power RF Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE04, pp. 1483-1488.
- R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1916-1919.
- H. G. Hereward, P. L. Morton, and K. H. Schindl, “The Effect of Ions on the Symmetrical Throbbing Beam Mode”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 180-182.
- A. Ratti, J. Staples, L. Doolittle, D. Oshatz, and T. Goulding, “SNS Front End Diagnostics”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC12, pp. 175-177.
- C. Nantista, C. Adolphsen, R. L. Brown, R. Fuller, and J. Rifkin, “Beam Profile Monitors in the NLCTA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P061, pp. 2186-2188.
- R. Perry, “An Extended RF Ion Source with Small Phase Space Emittance Area”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-3, pp. 474-479.
- H. Ludewig et al., “Collimator Systems for the SNS Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCR4, pp. 548-550.
- A. Joubert, “Status Report on the First Six Years of GANIL Operation”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-06, pp. 101-105.
- F. Amman, J. M. Paterson, A. M. Sessler, and B. Zotter, “DISCUSSION: The 'Head-Tail' Instability”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 851-852.
- V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
- S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
- C. Adolphsen et al., “Processing Studies of X-Band Accelerator Structures at the NLCTA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAA003, pp. 478-480.
- S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2277-2280.
- F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1047-1048.
- A. J. Jason et al., “Beam-Distribution System for Multi-Axis Imaging at the Advanced Hydrotest Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH065, pp. 3374-3376.
- K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 992-994.
- J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
- P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
- D. Rees, J. L. Erickson, R. W. Garnett, J. T. M. Lyles, and L. Rybarcyk, “LANSCE RF System Improvements for Current and Future Programs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC068, pp. 238-240.
- G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 685-690.
- J. Crone et al., “Simulation of longitudinal phase space measurements for the RUEDI ultrafast electron diffraction beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC33, pp. 3060-3063.
- T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUODB1, pp. 1328-1331.
- K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
- R. M. Jones and P. B. Wilson, “Minimizing RF System Costs in a Linear Collider by an Optimized Choice of Beam and Structure Parameters”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W012, pp. 545-547.
- W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
- S. Zelazny et al., “Multi-Device Knob Utility for LCLS at SLAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP023, pp. 134-136.
- C. S. Robinson, A. O. Hanson, and D. Jamnik, “Computer Studies of Orbits in High Energy Microtrons”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 624-630.
- V. Kamerdzhiev, C. B?Âhme, J. Dietrich, P. Forck, T. Giacomini, and D. A. Liakin, “Beam Test of the FAIR IPM Prototype in COSY”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB12, pp. 191-193.
- J. A. Clarke and G. S. Dobbing, “Commissioning of the New Multipole Wigglers in the SRS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA17, pp. 2653-2655.
- M. Popovic et al., “Innovative Magnetron Power Sources for SRF Linacs”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 473-475.
- A. Fisher, P. Gilad, F. Goldin, and N. Rostoker, “Studies of an Unneutral Electron Cloud in the CFIA”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3383-3386.
- G. Cox et al., “Status of the CLARA Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1517-1521.
- T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2284-2286.
- I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
- R. L. Ives et al., “200 kW, 350 - 700 MHz RF Sources using Multiple Beam Triodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 724-726.
- L. Hendrickson, N. Phinney, A. Seryi, P. Tenenbaum, and M. Woodley, “Beam-based Feedback for the NLC Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT157, pp. 2828-2830.
- M. Cavellier, “A New Process for Nitrogen Doping of Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 276.
- N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
- T. Taylor and J. S. C. Wills, “Enhanced High-Current ECR Proton Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-20, pp. 350-352.
- R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1402-1405.
- K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
- M. Tomizawa et al., “Status and Upgrade Plan of Slow Extraction from the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB014, pp. 3912-3914.
- K. Takayama, T. Adachi, W. Jiang, Y. Oguri, and H. Tsutsui, “Induction Sector Cyclotron for Cluster Ions”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper TUA2CCO02, pp. 314-316.
- N. Bongers et al., “Expertsystem for COSY - Control”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1126-1129.
- M. Carl?á, H. Bartosik, M. S. Beck, K. S. B. Li, and M. Schenk, “Studies of a New Optics With Intermediate Transition Energy as Alternative for High Intensity LHC Beams in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 713-716.
- T. Matsuzawa et al., “Invited Paper: Current and Future Aspects of Cancer Diagnosis with Positron Emission Tomography”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-03, pp. 597-601.
- K. Ko, H. Hoag, T. Lee, and S. Tantawi, “X-Band High Power Dry Load for NLCTA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ05, pp. 1726-1728.
- R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 83-85.
- M. Carl?á et al., “Transverse Beam Dynamics Studies With High Intensity LHC Beams in the SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1062-1065.
- A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 479-482.
- C. Carli, M. Aiba, M. Chanel, B. Goddard, M. Martini, and W. J. M. Weterings, “Lattice Issues of the CERN PSB with H- Charge Exchange Injection Hardware”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP036, pp. 3781-3783.
- E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1653-1656.
- M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2958-2961.
- S. Pauliuk et al., “A Fast Switching Mirror Chamber for FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC027, pp. 124-126.
- J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3231-3234.
- L. Bertolini et al., “Interaction Region Design at the PEP-II B Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP125G, pp. 460-462.
- R. J. Abrams, M. A. Cummings, V. G. Dudnikov, R. P. Johnson, and M. Popovic, “Residual-Gas Beam Profile Monitors for Intense Beams in Transfer Lines”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 469-472.
- P. B. Wilson, K. L. F. Bane, and J. B. Styles, “Comparison of Measured and Computed Loss to Parasitic Modes in Cylindrical Cavities with Beam Ports”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1496-1499.
- K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
- M. A. Allen, M. J. Lee, and P. L. Morton, “Synchrotron Frequency Spliting in the SLAC Storage Ring”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1084-1086.
- Y. Jongen et al., “Design Studies of the Compact Superconducting Cyclotron for Hadron Therapy”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS078, pp. 1678-1680.
- M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
- R. Chasman and G. A. Voss, “Isabelle e-p Option”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 777-782.
- D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
- P. Brown, H. Frischholz, G. Geschonke, H. Henke, and I. Wilson, “Development and First Results with a Storage Resonator Enhancing the Shunt Impedance of an Electron Accelerating Cavity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2707-2711.
- S. Hancock, M. Benedikt, and C. Carli, “An RF Scenario for Protons and Ions in the PS2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP055, pp. 1406-1408.
- V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 206-212.
- A. Gerhard et al., “RF Sparking in Accelerator Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1108-1111.
- S. Isagawa et al., “Operational Experience and Recent Upgrading of TRISTAN High Power CW Klystrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1206-1209.
- M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3032-3035.
- A. Masi et al., “SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2BCO04, pp. 1179-1186.
- A. Denker et al., “New Time Structures Available at the HZB Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 130-132.
- J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3234-3237.
- M. J. Lee, F. E. Mills, and P. L. Morton, “Throbbing Beam Instabilities in Particle Accelerators and Storage Rings”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 602-607.
- K. L. F. Bane, C. Adolphsen, K. Kubo, and K. A. Thompson, “Issues in Multi-bunch Emittance Preservation in the NLC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1114-1117.
- A. Yeremian, J. Adamski, and D. Shoffstall, “Computer-Automated Linac Diagnostics and Data Acquisition”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2279-2281.
- F. Amman, “Beam-Beam Limits”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 858-862.
- M. Sachwitz et al., “A Fast Switching Mirror Unit at FLASH”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP061, pp. 1223-1225.
- C. Pagani et al., “A High-Current Superconducting Proton Linac for an Accelerator-Driven Transmutation System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W037, pp. 1126-1128.
- P. A. Maslov, K. A. Meyer, and K. Zagar, “TestBed - Automated Hardware-in-the-Loop Test Framework”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO303, pp. 150-151.
- F. Zimmermann, O. S. Br??ning, and M. Klein, “The LHeC as a Higgs Boson Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO054, pp. 1017-1019.
- A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1158-1161.
- A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 240-243.
- E. Henestroza, S. Heifets, and M. Zolotorev, “Trapped Modes in the PEP-II B-Factory Interaction Region”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC08, pp. 2333-2335.
- X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
- O. Rahman et al., “High average current DC electron gun for strong hadron cooling”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC41, pp. 2053-2056.
- A. Hardt, S. A. Martin, R. Wagner, and C. A. Wiedner, “Extraction Beam Lines for COSY-Juelich”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1481-1484.
- M. S. de Jong et al., “Design of a Tuner and Adjustable RF Coupler for a CW 2856 MHz RF Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 829-832.
- A. M. Sessler, “New Techniques for Particle Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 308-314.
- J. Serrano et al., “The White Rabbit Project”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUC004, pp. 93-95.
- F. S. Felber et al., “Relativistic Injection into a High-Current Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2781-2784.
- N. T. Rider et al., “Development of an X-Ray Beam Size Monitor with Single Pass Measurement Capability for CesrTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP304, pp. 687-689.
- M. Ladeuze et al., “Control Systems for Ion Beam Applications Baby Cyclotrons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 827-830.
Back to search