Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Delerue, S. Jenzer, V. Khodnevych, A. Migayron, N. F. Shul, and S. Trofymenko, “Proposal to Observe Half-Bare Electrons on a 40-MeV LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 126-128. doi:10.18429/JACoW-IPAC2017-MOPAB024
[n] H. Gundel, H. Henke, H. Heydari, K. Schmidt, and D. Suchland, “Profile Measurements on a Pulsed Ferroelectric Electron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1023-1026.
[n] F. Valentini, T. Hakulinen, L. Hammouti, and P. Ninin, “Integration of Heterogeneous Access Control Functionalities Using the New Generation of NI cRIO 903x Controllers”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 424-427. doi:10.18429/JACoW-ICALEPCS2015-MOPGF143
[n] P. Czernecki, P. Bulira, P. Gebala, J. Janiga, and P. Klimecki, “Technical Overview of the SOLARIS Low-Conductivity Water Cooling System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3449-3451. doi:10.18429/JACoW-IPAC2017-WEPVA082
[n] D. Bulfone et al., “The FERMI FEL Project at Trieste”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG11, pp. 186-188.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] J. T. M. Chrin, “A Cython Interface to EPICS Channel Access for High-level Python Applications”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 21-24. doi:10.18429/JACoW-PCAPAC2016-WEUIPLCO04
[n] P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_032.
[n] T. Tajima et al., “Q Degradation of LANL 700 MHz Beta=0.64 Elliptical Cavities and ANL 340 MHz Spoke Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO030, pp. 2286-2288.
[n] R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185.
[n] D. M. Kong et al., “Conceptual Study of High Power Proton Linac for Clean Nuclear Power System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D014, pp. 110-111.
[n] K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2939-2942.
[n] W. M. Tam et al., “Fermilab HINS Proton Ion Source Beam Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP052, pp. 3570-3572.
[n] S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
[n] G. M??ller, “Diagnostic Techniques and Defect Classification”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-22, pp. XX-XX.
[n] S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
[n] R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
[n] Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
[n] L. Wang, “Adaptive Impedance Analysis of Grooved Surface Using the Finite Element Method”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS067, pp. 3639-3641.
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
[n] L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 982-985.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Delerue, S. Jenzer, V. Khodnevych, A. Migayron, N. F. Shul, and S. Trofymenko, “Proposal to Observe Half-Bare Electrons on a 40-MeV LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 126-128.
- H. Gundel, H. Henke, H. Heydari, K. Schmidt, and D. Suchland, “Profile Measurements on a Pulsed Ferroelectric Electron Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1023-1026.
- F. Valentini, T. Hakulinen, L. Hammouti, and P. Ninin, “Integration of Heterogeneous Access Control Functionalities Using the New Generation of NI cRIO 903x Controllers”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 424-427.
- P. Czernecki, P. Bulira, P. Gebala, J. Janiga, and P. Klimecki, “Technical Overview of the SOLARIS Low-Conductivity Water Cooling System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3449-3451.
- D. Bulfone et al., “The FERMI FEL Project at Trieste”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG11, pp. 186-188.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- J. T. M. Chrin, “A Cython Interface to EPICS Channel Access for High-level Python Applications”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 21-24.
- P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_032.
- T. Tajima et al., “Q Degradation of LANL 700 MHz Beta=0.64 Elliptical Cavities and ANL 340 MHz Spoke Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO030, pp. 2286-2288.
- R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 180-185.
- D. M. Kong et al., “Conceptual Study of High Power Proton Linac for Clean Nuclear Power System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D014, pp. 110-111.
- K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2939-2942.
- W. M. Tam et al., “Fermilab HINS Proton Ion Source Beam Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP052, pp. 3570-3572.
- S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
- G. M??ller, “Diagnostic Techniques and Defect Classification”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-22, pp. XX-XX.
- S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
- R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
- Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
- L. Wang, “Adaptive Impedance Analysis of Grooved Surface Using the Finite Element Method”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS067, pp. 3639-3641.
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
- L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 982-985.
Back to search