Favourites
For Word
[n] V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n] G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
[n] Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1390-1393. doi:10.18429/JACoW-IPAC2018-TUPMF056
[n] Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
[n] Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM070, unpublished.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
[n] Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
[n] A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
[n] S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
[n] M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
[n] C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11
[n] J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
[n] J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2345-2348. doi:10.18429/JACoW-IPAC2019-WEPMP018
[n] R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
[n] Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3632-3634. doi:10.18429/JACoW-IPAC2024-THPR51
[n] A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 176-179. doi:10.18429/JACoW-ECRIS2018-WEB2
[n] F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
[n] Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1574-1576. doi:10.18429/JACoW-IPAC2018-TUPML020
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 82-85. doi:10.18429/JACoW-ICALEPCS2015-MOM308
For LaTeX
Use Complete Form
For BibTeX
References
- V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4392-4394.
- G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
- Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1390-1393.
- Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
- Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM070, unpublished.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
- Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
- A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
- S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
- M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
- C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 252-254.
- J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
- J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2345-2348.
- R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
- Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR51, pp. 3632-3634.
- A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 176-179.
- F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
- Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1574-1576.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 82-85.
Back to search