Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Wang et al., “CEPC Parameter Choice and Partial Double Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3788-3790. doi:10.18429/JACoW-IPAC2016-THPOR010
[n] D. Robin, C. Steier, W. Wan, and A. Wolski, “Impact of Narrow Gap Undulators on the Advanced Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB086, pp. 2246-2248.
[n] S. An, Y.-S. Cho, and B. H. Choi, “Design of The PEFP Low Beta Cryomodule”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC2MA01, pp. 564-566.
[n] J. Y. Tang, H. C. Hseuh, and L. A. Smart, “Design and Development of the SNS Ring Vacuum Instrumentation and Control Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH006, pp. 779-781.
[n] E. Skordis, C. P. Welsch, and V. Vlachoudis, “A Monte Carlo Approach to Imaging and Dose Simulations in Realistic Phantoms Using Compact X-Ray Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4783-4786. doi:10.18429/JACoW-IPAC2017-THPVA137
[n] A. N. Lebedev, “LASER COOLING IN ELECTRON STORAGE RING AND ITS LIMITS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBI02, pp. XX-XX.
[n] H. G. Kirk, D. Cline, A. A. Garren, S. A. Kahn, and F. E. Mills, “A Compact 6D Muon Cooling Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP048, pp. 3025-3027.
[n] M. Foley, P. Colestock, and E. Barsotti Jr, “TSD Versus TRL Calibration and Applications to Beam Impedance Measurements”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3294-3297.
[n] J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
[n] C. Christou and V. C. Kempson, “Operation of the Diamond Light Source Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN086, pp. 1112-1114.
[n] C. Johnstone, R. B. Agustsson, S. Boucher, S. V. Kutsaev, R. C. Lanza, and A. Yu. Smirnov, “A 15-Mev/nucleon Iso-Cyclotron for Security and Radioisotope Production”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 223-226. doi:10.18429/JACoW-CYCLOTRONS2019-TUP029
[n] T. Limberg, B. Beutner, W. Decking, M. Dohlus, K. Floettmann, and M. Krasilnikov, “Velocity Bunching at the European XFEL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN020, pp. 959-961.
[n] R. A. Marsh, B. J. Munroe, M. A. Shapiro, and R. J. Temkin, “Design of Advanced Photonic Bandgap (PBG) Structures for High Gradient Accelerator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP081, pp. 2986-2988.
[n] K. J. Hazelwood et al., “Second Generation Fermilab Main Injector 8 GeV Beamline Collimation Preliminary Design”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 116-119. doi:10.18429/JACoW-NAPAC2022-MOPA29
[n] C. H. Kuo, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “Integration Design of BPM and Orbit Feedback Electronic for the TPS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR052, pp. 900-902.
[n] S. H. Kim, M.-H. Cho, W. Namkung, J.-S. Oh, S.-I. Moon, and B. Park, “Beam Dynamics for Intense L-band Electron Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP005, pp. 37-39.
[n] C. Simopoulos and R. L. Holtzapple, “Damping Rate Measurements in the SLC Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC04, pp. 3073-3075.
[n] N. V. Mokhov, K. Hasegawa, S. Henderson, R. Schmidt, M. Tomizawa, and K. Wittenburg, “Summary of Working Group C+G (Part I)”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper FRAP03, pp. 365-371.
[n] W. Kleeven et al., “Injection And Central Region Design For The Iba C70 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 66-68.
[n] J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
[n] H. Iijima, R. Hajima, E. J. Minehara, R. Nagai, and N. Nishimori, “Development of Frequency-Resolved Optical Gating for Measurement of Correlation between Time and Frequency of Chirped FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH002, pp. 308-311.
[n] T. A. Pelaia II et al., “Open XAL Status Report 2016”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3083-3085. doi:10.18429/JACoW-IPAC2016-WEPOY042
[n] M. Song and T. Shaftan, “Design of the low-emittance complex bend lattice”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3233-3236. doi:10.18429/JACoW-IPAC2024-THPC82
For LaTeX
Use Complete Form
For BibTeX
References
- D. Wang et al., “CEPC Parameter Choice and Partial Double Ring Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3788-3790.
- D. Robin, C. Steier, W. Wan, and A. Wolski, “Impact of Narrow Gap Undulators on the Advanced Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB086, pp. 2246-2248.
- S. An, Y.-S. Cho, and B. H. Choi, “Design of The PEFP Low Beta Cryomodule”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC2MA01, pp. 564-566.
- J. Y. Tang, H. C. Hseuh, and L. A. Smart, “Design and Development of the SNS Ring Vacuum Instrumentation and Control Systems”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH006, pp. 779-781.
- E. Skordis, C. P. Welsch, and V. Vlachoudis, “A Monte Carlo Approach to Imaging and Dose Simulations in Realistic Phantoms Using Compact X-Ray Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4783-4786.
- A. N. Lebedev, “LASER COOLING IN ELECTRON STORAGE RING AND ITS LIMITS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBI02, pp. XX-XX.
- H. G. Kirk, D. Cline, A. A. Garren, S. A. Kahn, and F. E. Mills, “A Compact 6D Muon Cooling Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP048, pp. 3025-3027.
- M. Foley, P. Colestock, and E. Barsotti Jr, “TSD Versus TRL Calibration and Applications to Beam Impedance Measurements”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3294-3297.
- J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
- C. Christou and V. C. Kempson, “Operation of the Diamond Light Source Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN086, pp. 1112-1114.
- C. Johnstone, R. B. Agustsson, S. Boucher, S. V. Kutsaev, R. C. Lanza, and A. Yu. Smirnov, “A 15-Mev/nucleon Iso-Cyclotron for Security and Radioisotope Production”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 223-226.
- T. Limberg, B. Beutner, W. Decking, M. Dohlus, K. Floettmann, and M. Krasilnikov, “Velocity Bunching at the European XFEL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN020, pp. 959-961.
- R. A. Marsh, B. J. Munroe, M. A. Shapiro, and R. J. Temkin, “Design of Advanced Photonic Bandgap (PBG) Structures for High Gradient Accelerator Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP081, pp. 2986-2988.
- K. J. Hazelwood et al., “Second Generation Fermilab Main Injector 8 GeV Beamline Collimation Preliminary Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 116-119.
- C. H. Kuo, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “Integration Design of BPM and Orbit Feedback Electronic for the TPS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR052, pp. 900-902.
- S. H. Kim, M.-H. Cho, W. Namkung, J.-S. Oh, S.-I. Moon, and B. Park, “Beam Dynamics for Intense L-band Electron Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP005, pp. 37-39.
- C. Simopoulos and R. L. Holtzapple, “Damping Rate Measurements in the SLC Damping Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC04, pp. 3073-3075.
- N. V. Mokhov, K. Hasegawa, S. Henderson, R. Schmidt, M. Tomizawa, and K. Wittenburg, “Summary of Working Group C+G (Part I)”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper FRAP03, pp. 365-371.
- W. Kleeven et al., “Injection And Central Region Design For The Iba C70 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 66-68.
- J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
- H. Iijima, R. Hajima, E. J. Minehara, R. Nagai, and N. Nishimori, “Development of Frequency-Resolved Optical Gating for Measurement of Correlation between Time and Frequency of Chirped FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH002, pp. 308-311.
- T. A. Pelaia II et al., “Open XAL Status Report 2016”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3083-3085.
- M. Song and T. Shaftan, “Design of the low-emittance complex bend lattice”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC82, pp. 3233-3236.
Back to search