Favourites
For Word
[n] R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1986-1988. doi:10.18429/JACoW-IPAC2015-TUPHA010
[n] H. Haseroth, “Status of Studies for a Neutrino Factory at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOAF104, pp. 253-255.
[n] R. Steerenberg and J. Wenninger, “Operation Challenges and Performance of the LHC During Run II”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 357-361. doi:10.18429/JACoW-HB2018-THA2WD01
[n] J. Gao, “Analytical Estimation of Dynamic Apertures Limited by the Wigglers in Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG041, pp. 3267-3269.
[n] N. S. Kremnev et al., “Adjusting Unit of Longitudinal Field Coils for NICA HV Electron CoolerÔÇÖs Solenoid”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 127-128. doi:10.18429/JACoW-COOL2019-TUPS21
[n] W. O. Brunk and D. R. Walz, “A New Pulse Magnet Design Utilizing Tape Wound Cores”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1548-1552.
[n] C. Wiesner, L. P. Chau, M. Droba, O. Meusel, and U. Ratzinger, “A 250 kHz Chopper for Low Energy High Intensity Proton Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP111, pp. 3623-3625.
[n] W. A. Reupke and D. R. Walz, “Operating Experience with High Power Beam Absorbers in the SLAC Beam Switchyard”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 827-832.
[n] J. Gao, “Analytical Calculation of the Coupling Coefficient of a Waveguide-Cavity Coupling System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH081, pp. 957-959.
[n] K. E. Melconian et al., “Superconducting Beam Transport Channel for a Strong-Focusing Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB03, pp. 278-282.
[n] J. Gao, “Theoretical Investigation of a Traveling Wave RF Gun”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 584-587.
[n] A. Wolski, J. Gao, and S. Guiducci, “Choosing a Baseline Configuration for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS139, pp. 885-887.
[n] S. A. Kahn, G. Flanagan, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “YBCO Conductor Technology for High Field Muon Cooling Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB055, pp. 394-396.
[n] R. B. Palmer, J. S. Berg, and D. Stratakis, “6D Cooling in Periodic Lattices Including a Planar Snake”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA04, pp. 26-30.
[n] K. Schulte, M. Droba, O. Meusel, and U. Ratzinger, “Investigation of Diagnostic Techniques on a Nonneutral Plasma”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD93, pp. 266-268.
[n] C. Pellegrini, “Linacs for Free Electron Lasers”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU104, pp. 273-277.
[n] I. Hofmann, “Recent Development in Inertial Fusion Based on RF Acceleration”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU203, pp. 289-293.
[n] J. Gao, “An S-Band Superconducting Linear Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP084G, pp. 498-500.
[n] M. Berglund, E. Gianfelice, T. Sen, and F. Willeke, “Design of the HERA-e Lattice and Chromaticity Correction for the Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP35G, pp. 427-429.
[n] Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
[n] B. Autin et al., “A Slow-Cycling Proton Driver for a Neutrino Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A09, pp. 966-968.
[n] H. G. Kirk et al., “A Proof-of-Principle Experiment for a High-Power Target System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH196, pp. 3254-3256.
[n] S. A. Kahn, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “HTS Development for 30-50 T Final Muon Cooling Solenoids”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP071, pp. 295-297.
[n] K. A. Levterov et al., “Acceleration the Beams of He⁺ and Fe14+ Ions by HILAC and its Injection into NICA Booster in its Second Run”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 65-67. doi:10.18429/JACoW-RuPAC2021-WEA02
[n] M. Turenne, F. Hunte, R. P. Johnson, and J. Schwartz, “Multi-Purpose Fiber Optic Sensors for High Temperature Superconductor Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP072, pp. 298-300.
[n] T. Fieguth, S. Kheifets, and J. J. Murray, “Studies of Anomalous Dispersion in the SLC Second Order Achromat”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 77-80.
[n] B. Autin et al., “Design of a 2.2 GeV Accumulator and Compressor for a Neutrino Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B07, pp. 921-923.
[n] S. Kheifets, “Beam Size Enhancement Due to the Presence of Sextupole Magnets in a Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2418-2421.
[n] A. D. Palczewski, D. Gonnella, O. S. Melnychuk, and D. A. Sergatskov, “Study of Flux Trapping Variability between Batches of Tokyo Denkai Niobium used for the LCLS-II Project and Subsequent 9-cell RF Loss Distribution between the Batches”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 570-575. doi:10.18429/JACoW-SRF2019-TUP057
For LaTeX
Use Complete Form
For BibTeX
References
- R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1986-1988.
- H. Haseroth, “Status of Studies for a Neutrino Factory at CERN”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOAF104, pp. 253-255.
- R. Steerenberg and J. Wenninger, “Operation Challenges and Performance of the LHC During Run II”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 357-361.
- J. Gao, “Analytical Estimation of Dynamic Apertures Limited by the Wigglers in Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG041, pp. 3267-3269.
- N. S. Kremnev et al., “Adjusting Unit of Longitudinal Field Coils for NICA HV Electron CoolerÔÇÖs Solenoid”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 127-128.
- W. O. Brunk and D. R. Walz, “A New Pulse Magnet Design Utilizing Tape Wound Cores”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1548-1552.
- C. Wiesner, L. P. Chau, M. Droba, O. Meusel, and U. Ratzinger, “A 250 kHz Chopper for Low Energy High Intensity Proton Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP111, pp. 3623-3625.
- W. A. Reupke and D. R. Walz, “Operating Experience with High Power Beam Absorbers in the SLAC Beam Switchyard”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 827-832.
- J. Gao, “Analytical Calculation of the Coupling Coefficient of a Waveguide-Cavity Coupling System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH081, pp. 957-959.
- K. E. Melconian et al., “Superconducting Beam Transport Channel for a Strong-Focusing Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU4PB03, pp. 278-282.
- J. Gao, “Theoretical Investigation of a Traveling Wave RF Gun”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 584-587.
- A. Wolski, J. Gao, and S. Guiducci, “Choosing a Baseline Configuration for the ILC Damping Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS139, pp. 885-887.
- S. A. Kahn, G. Flanagan, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “YBCO Conductor Technology for High Field Muon Cooling Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB055, pp. 394-396.
- R. B. Palmer, J. S. Berg, and D. Stratakis, “6D Cooling in Periodic Lattices Including a Planar Snake”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA04, pp. 26-30.
- K. Schulte, M. Droba, O. Meusel, and U. Ratzinger, “Investigation of Diagnostic Techniques on a Nonneutral Plasma”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD93, pp. 266-268.
- C. Pellegrini, “Linacs for Free Electron Lasers”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU104, pp. 273-277.
- I. Hofmann, “Recent Development in Inertial Fusion Based on RF Acceleration”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU203, pp. 289-293.
- J. Gao, “An S-Band Superconducting Linear Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP084G, pp. 498-500.
- M. Berglund, E. Gianfelice, T. Sen, and F. Willeke, “Design of the HERA-e Lattice and Chromaticity Correction for the Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP35G, pp. 427-429.
- Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
- B. Autin et al., “A Slow-Cycling Proton Driver for a Neutrino Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A09, pp. 966-968.
- H. G. Kirk et al., “A Proof-of-Principle Experiment for a High-Power Target System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH196, pp. 3254-3256.
- S. A. Kahn, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “HTS Development for 30-50 T Final Muon Cooling Solenoids”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP071, pp. 295-297.
- K. A. Levterov et al., “Acceleration the Beams of He⁺ and Fe14+ Ions by HILAC and its Injection into NICA Booster in its Second Run”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 65-67.
- M. Turenne, F. Hunte, R. P. Johnson, and J. Schwartz, “Multi-Purpose Fiber Optic Sensors for High Temperature Superconductor Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP072, pp. 298-300.
- T. Fieguth, S. Kheifets, and J. J. Murray, “Studies of Anomalous Dispersion in the SLC Second Order Achromat”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 77-80.
- B. Autin et al., “Design of a 2.2 GeV Accumulator and Compressor for a Neutrino Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B07, pp. 921-923.
- S. Kheifets, “Beam Size Enhancement Due to the Presence of Sextupole Magnets in a Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2418-2421.
- A. D. Palczewski, D. Gonnella, O. S. Melnychuk, and D. A. Sergatskov, “Study of Flux Trapping Variability between Batches of Tokyo Denkai Niobium used for the LCLS-II Project and Subsequent 9-cell RF Loss Distribution between the Batches”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 570-575.
Back to search