Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. G. Abbott, G. Rehm, and I. S. Uzun, “A New Transverse and Longitudinal Bunch by Bunch Feedback Processor”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1649-1654. doi:10.18429/JACoW-ICALEPCS2017-THPHA115
[n] B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
[n] K. R. Eppley, W. B. Herrmannsfeldt, and R. H. Miller, “Design of a Wiggler-Focused, Sheet Beam X Band Klystron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1809-1812.
[n] J. D. Gonczy, R. Ferry, R. C. Niemann, and B. Roop, “UHV Seal Studies for the Advanced Photon Source Storage Ring Vacuum System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2304-2307.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] N. I. Moseiko et al., “New Automated Control System for the Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 414-416. doi:10.18429/JACoW-RUPAC2018-THPSC06
[n] Y. Yu et al., “T-Mapping diagnostic system for vertical test of SHINE superconducting cavity”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2782-2784. doi:10.18429/JACoW-IPAC2024-WEPS40
[n] W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n] D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4346-4348. doi:10.18429/JACoW-IPAC2017-THPIK107
[n] R. H. A. Farias, O. R. Bagnato, F. R. Francisco, D. V. Freitas, and F. E. Manoel, “Development of Diffusion Bonding Joints between Oxgen Free Copper and AISI 316L Stainless Steel for Accelerator Components”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB042, pp. 3975-3977.
[n] N. A. Vinokurov et al., “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEEI01, pp. XX-XX.
[n] A. Gurinovich and V. G. Baryshevsky, “Electrodynamical Properties of a Volume Free Electron Laser with a ''Grid'' Resonator”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH013, pp. 335-338.
[n] Y. S. Cho, B. H. Choi, J. H. Ha, J. H. Lee, J. S. Lee, and S. J. Lim, “Polymer?s Surface Resistivity Improvement using by Ion Implantation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A11, pp. 2577-2579.
[n] J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
[n] P. Faugeras, A. Faugier, J. Gareyte, and A. Hilaire, “Second Order Effects in the Sextupole-Corrected SPS Lattice”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3577-3580.
[n] A. Ballarino et al., “Preparation and Testing of Prototype 12.5 kA High Temperature Superconducting Current Leads for the LHC at CERN”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP102G, pp. 2296-2298.
[n] T. Momose, H. Ishimaru, K. Kanazawa, H. Mizuno, K. Narushima, and H. Watanabe, “Operational Characteristics of the TRISTAN Accumulation Ring Vacuum System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3809-3812.
[n] D. G. Maxwell, M. Bauer, M. Fuller, E. Matias, S. McIntryre, and T. W. Simpson, “Remote Access to a Scanning Electron Microscope using Science Studio”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL007, pp. 136-138.
[n] N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
[n] M. E. Couprie, M. Billardon, D. Garzella, C. Monet-Descombey, and M. Sommer, “Relation Between the Super-ACO Storage Ring Free Electron Laser and the Longitudinal Characteristics of the Positron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 623-626.
[n] V. Petrenko and N. A. Chernoplekov, “Some Aspects of Photonuclear Reaction Applications in Radiation Technologies”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2630-2633.
[n] R. C. Trendler and J. M. Bogaty, “The Horizontal and Vertical Damper Systems at the Zero Gradient Synchrotron and Their Performance Characteristics”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1082-1084.
[n] J. J. Kritzinger, R. E. F. Fenemore, and M. J. van Niekerk, “The Radio-Frequency System of the NAC 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-08, pp. 357-360.
[n] B. Zhang, J. P. Dai, D. M. Li and J, and Y. X. Luo, “DEVELOPMENT OF THE BUNCHING SYSTEM OF THE SSRF LINAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP002, pp. XX-XX.
[n] P. Giansiracusa et al., “Measurements of dark current and breakdown phenomena using Faraday cups at the Xband Laboratory for Accelerators and Beams (XLAB)”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS108, unpublished.
[n] G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
[n] M. Takanaka et al., “Control System of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 836-839.
[n] V. A. Pikalov et al., “The Results Obtained on Radiobiological Stand" Facility”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper FRB06, pp. -Working-with-the-Extracted-Carbon-Ion-Beam-of-the-U-70-Accelerator".
For LaTeX
Use Complete Form
For BibTeX
References
- M. G. Abbott, G. Rehm, and I. S. Uzun, “A New Transverse and Longitudinal Bunch by Bunch Feedback Processor”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1649-1654.
- B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
- K. R. Eppley, W. B. Herrmannsfeldt, and R. H. Miller, “Design of a Wiggler-Focused, Sheet Beam X Band Klystron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1809-1812.
- J. D. Gonczy, R. Ferry, R. C. Niemann, and B. Roop, “UHV Seal Studies for the Advanced Photon Source Storage Ring Vacuum System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2304-2307.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- N. I. Moseiko et al., “New Automated Control System for the Kurchatov Synchrotron Radiation Source”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 414-416.
- Y. Yu et al., “T-Mapping diagnostic system for vertical test of SHINE superconducting cavity”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS40, pp. 2782-2784.
- W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 688-690.
- D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4346-4348.
- R. H. A. Farias, O. R. Bagnato, F. R. Francisco, D. V. Freitas, and F. E. Manoel, “Development of Diffusion Bonding Joints between Oxgen Free Copper and AISI 316L Stainless Steel for Accelerator Components”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB042, pp. 3975-3977.
- N. A. Vinokurov et al., “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEEI01, pp. XX-XX.
- A. Gurinovich and V. G. Baryshevsky, “Electrodynamical Properties of a Volume Free Electron Laser with a ''Grid'' Resonator”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH013, pp. 335-338.
- Y. S. Cho, B. H. Choi, J. H. Ha, J. H. Lee, J. S. Lee, and S. J. Lim, “Polymer?s Surface Resistivity Improvement using by Ion Implantation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A11, pp. 2577-2579.
- J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
- P. Faugeras, A. Faugier, J. Gareyte, and A. Hilaire, “Second Order Effects in the Sextupole-Corrected SPS Lattice”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3577-3580.
- A. Ballarino et al., “Preparation and Testing of Prototype 12.5 kA High Temperature Superconducting Current Leads for the LHC at CERN”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP102G, pp. 2296-2298.
- T. Momose, H. Ishimaru, K. Kanazawa, H. Mizuno, K. Narushima, and H. Watanabe, “Operational Characteristics of the TRISTAN Accumulation Ring Vacuum System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3809-3812.
- D. G. Maxwell, M. Bauer, M. Fuller, E. Matias, S. McIntryre, and T. W. Simpson, “Remote Access to a Scanning Electron Microscope using Science Studio”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL007, pp. 136-138.
- N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
- M. E. Couprie, M. Billardon, D. Garzella, C. Monet-Descombey, and M. Sommer, “Relation Between the Super-ACO Storage Ring Free Electron Laser and the Longitudinal Characteristics of the Positron Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 623-626.
- V. Petrenko and N. A. Chernoplekov, “Some Aspects of Photonuclear Reaction Applications in Radiation Technologies”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2630-2633.
- R. C. Trendler and J. M. Bogaty, “The Horizontal and Vertical Damper Systems at the Zero Gradient Synchrotron and Their Performance Characteristics”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1082-1084.
- J. J. Kritzinger, R. E. F. Fenemore, and M. J. van Niekerk, “The Radio-Frequency System of the NAC 200 MeV Separated-Sector Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-08, pp. 357-360.
- B. Zhang, J. P. Dai, D. M. Li and J, and Y. X. Luo, “DEVELOPMENT OF THE BUNCHING SYSTEM OF THE SSRF LINAC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP002, pp. XX-XX.
- P. Giansiracusa et al., “Measurements of dark current and breakdown phenomena using Faraday cups at the Xband Laboratory for Accelerators and Beams (XLAB)”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS108, this conference.
- G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
- M. Takanaka et al., “Control System of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 836-839.
- V. A. Pikalov et al., “The Results Obtained on Radiobiological Stand" Facility”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper FRB06, pp. -Working-with-the-Extracted-Carbon-Ion-Beam-of-the-U-70-Accelerator".
Back to search