Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Zangrando et al., “A Superconducting 3.5 T Multipole Wiggler for the ELETTRA Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE044, pp. 2634-2636.
[n] L. Hardy, J. M. Chaize, S. D. Cross, D. Fraser, O. Goudard, and N. V. Hurley, “Evolution and Status of the Electronic Logbooks at the ESRF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP004, pp. 1532-1534.
[n] S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 805-807.
[n] E. Bulyak and V. Kurilko, “Coherency of Magnetic-Bremsstrahlung Emitters and Prospects for the X-ray FELs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01J, pp. 655-657.
[n] J. Dragt, “Release of MARYLIE 3.0”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA65, pp. 2761-2763.
[n] S. E. Toporkov, “Optimization of Electric Field Distribution Inside Multi-gap CH-Resonator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB05, pp. 164-165.
[n] M. Hara, T. Fukasawa, F. Kikuchi, and T. Wada, “Three-Dimensional Analysis of RF Electromagnetic Field by Finite Element Method”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3639-3642.
[n] M. Kuriki et al., “Beam Loading Compensation of Standing Wave Linac with Off-Crest Acceleration”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1893-1896. doi:10.18429/JACoW-IPAC2022-WEPOPT024
[n] M. Hara, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and T. Takashima, “RF Stations of the SPring-8 Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P028, pp. 2971-2973.
[n] A. Bortnyansky, M. Klopenkov, M. Pavlovets, M. Svinin, P. Kovach, and J. Dobrovodsky, “Microprocessor Controlled Four-Axis Goniometer”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA18, pp. 2120-2122.
[n] I. M. Karnaukhov, I. I. Koba, Yu. Popkov, Yu. N. Telegin, N. A. Trushkin, and G. V. Tsepilov, “Simulation and Experimental Studies of 699.3 MHz RF-Structures for the Electron Pulse Stretcher”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1034-1037.
[n] C. H. Thoma et al., “LSP Simulations of the Neutralized Drift Compression Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE077, pp. 4006-4008.
[n] Z. T. Zhao, J. H. Chen, C. Feng, Z. Wang, and K. Q. Zhang, “A Proposal for Coherent Hard X-Ray Generation Based on Two-Stage EEHG”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 38-40. doi:10.18429/JACoW-IPAC2018-MOZGBD5
[n] P. A. McIntosh, R. Akre, J. Brooks, P. Emma, and E. Rago, “Realization of an X-Band RF System for LCLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT044, pp. 2801-2803.
[n] J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR038, pp. 3018-3020.
[n] K. Foraz, B. Nicquevert, and D. Tommasini, “Logistics of LHC Cryodipoles: from Simulation to Storage Management”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT016, pp. 1855-1857.
[n] M. J. Spencer et al., “Diagnostics and Timing at the Australian Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH003, pp. 995-997.
[n] A. Orzhekhovskaya, W. A. Barth, I. Hofmann, and S. G. Yaramyshev, “Beam Dynamics Simulations for the Laser Proton Injector Transport Line”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD31, pp. 130-133.
[n] J. W. Beal, “The Astron Linear Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-1, pp. 713-723.
[n] I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
[n] B. Walasek-H?Âhne, P. Forck, K. Hoehne, R. Ischebeck, and G. Kube, “Screens for High Precision Measurements”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 242-248. doi:10.18429/JACoW-IBIC2019-TUBO01
[n] M. Gusarova et al., “QWR resonator Cavities Electrodynamics Simulations for new Nuclotron-NICA Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 274-276. doi:10.18429/JACoW-RUPAC2016-TUPSA028
[n] V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
[n] C. Fischer, “Coping with Alignment Tolerances on CLIC Components in the 10 mum Range”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 683-686.
[n] P. K. Roy et al., “Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE071, pp. 3856-3858.
[n] E. Huttel, B. Barg, A. Jackson, and B. Mountford, “The Vacuum System of the Australian Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF029, pp. 1663-1665.
[n] R. C. Sah, J. R. Chen, C. C. Kuo, and and G. H. Luo, “Status Report on the Synchrotron Radiation Research Center”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4B003, pp. 32-35.
[n] D. Li, J. W. Staples, and S. P. Virostek, “Detailed Modeling of the SNS RFQ Structure with CST Microwave Studio”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP008, pp. 580-582.
[n] D. M?ñder et al., “Construction of the MYRRHA Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2221-2223. doi:10.18429/JACoW-IPAC2017-TUPVA062
[n] D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
[n] K. Chalut, V. N. Litvinenko, and V. Pinayev, “Novel Method for Phase-Space Tomography of Rapidly Evolving E-beams”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS53, pp. XX-XX.
[n] J. Oegren, A. K. Bhattacharyya, M. Holz, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “Beam-Based Alignment Studies at CTF3 Using the Octupole Component of CLIC Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 371-373. doi:10.18429/JACoW-IPAC2017-MOPAB108
[n] Y. Lei et al., “Power-Conditioning Cavity Design and Measurement of the Coaxial Coupler for the Injector of XiPAF Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4218-4220. doi:10.18429/JACoW-IPAC2017-THPIK055
[n] G. Bronca, C. Lefrancois, J. Perot, and J. P. Pouillange, “Pulsed Superconducting Magnet Work at Saclay”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 636-639.
[n] L. K. Chen, F. R. Huson, W. W. MacKay, S. Ohnuma, and C. A. Swenson, “A Compact X-Ray Lithography Lattice using Superferric Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1242-1245.
[n] H. Zen et al., “Beam Energy Compensation by RF Amplitude Control for Thermionic RF Gun and Linac Based Mid-infrared FEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC113, pp. 1329-1331.
[n] Y. Lozeev, M. Gusarova, M. A. Guzov, E. N. Indiushnii, A. I. Makarov, and S. M. Polozov, “Optimization of the RFQ Electrode Construction for Multipactor Discharge Prevention”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC11, unpublished.
[n] S. Minaev et al., “Particle Dynamics Simulation in Wobbler System for Hollow High Energy Heavy Ion Beam Formation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP041, pp. 2193-2195.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Zangrando et al., “A Superconducting 3.5 T Multipole Wiggler for the ELETTRA Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE044, pp. 2634-2636.
- L. Hardy, J. M. Chaize, S. D. Cross, D. Fraser, O. Goudard, and N. V. Hurley, “Evolution and Status of the Electronic Logbooks at the ESRF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP004, pp. 1532-1534.
- S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 805-807.
- E. Bulyak and V. Kurilko, “Coherency of Magnetic-Bremsstrahlung Emitters and Prospects for the X-ray FELs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01J, pp. 655-657.
- J. Dragt, “Release of MARYLIE 3.0”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA65, pp. 2761-2763.
- S. E. Toporkov, “Optimization of Electric Field Distribution Inside Multi-gap CH-Resonator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB05, pp. 164-165.
- M. Hara, T. Fukasawa, F. Kikuchi, and T. Wada, “Three-Dimensional Analysis of RF Electromagnetic Field by Finite Element Method”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3639-3642.
- M. Kuriki et al., “Beam Loading Compensation of Standing Wave Linac with Off-Crest Acceleration”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1893-1896.
- M. Hara, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and T. Takashima, “RF Stations of the SPring-8 Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P028, pp. 2971-2973.
- A. Bortnyansky, M. Klopenkov, M. Pavlovets, M. Svinin, P. Kovach, and J. Dobrovodsky, “Microprocessor Controlled Four-Axis Goniometer”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA18, pp. 2120-2122.
- I. M. Karnaukhov, I. I. Koba, Yu. Popkov, Yu. N. Telegin, N. A. Trushkin, and G. V. Tsepilov, “Simulation and Experimental Studies of 699.3 MHz RF-Structures for the Electron Pulse Stretcher”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1034-1037.
- C. H. Thoma et al., “LSP Simulations of the Neutralized Drift Compression Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE077, pp. 4006-4008.
- Z. T. Zhao, J. H. Chen, C. Feng, Z. Wang, and K. Q. Zhang, “A Proposal for Coherent Hard X-Ray Generation Based on Two-Stage EEHG”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 38-40.
- P. A. McIntosh, R. Akre, J. Brooks, P. Emma, and E. Rago, “Realization of an X-Band RF System for LCLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT044, pp. 2801-2803.
- J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR038, pp. 3018-3020.
- K. Foraz, B. Nicquevert, and D. Tommasini, “Logistics of LHC Cryodipoles: from Simulation to Storage Management”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT016, pp. 1855-1857.
- M. J. Spencer et al., “Diagnostics and Timing at the Australian Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH003, pp. 995-997.
- A. Orzhekhovskaya, W. A. Barth, I. Hofmann, and S. G. Yaramyshev, “Beam Dynamics Simulations for the Laser Proton Injector Transport Line”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD31, pp. 130-133.
- J. W. Beal, “The Astron Linear Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-1, pp. 713-723.
- I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
- B. Walasek-H?Âhne, P. Forck, K. Hoehne, R. Ischebeck, and G. Kube, “Screens for High Precision Measurements”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 242-248.
- M. Gusarova et al., “QWR resonator Cavities Electrodynamics Simulations for new Nuclotron-NICA Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 274-276.
- V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
- C. Fischer, “Coping with Alignment Tolerances on CLIC Components in the 10 mum Range”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 683-686.
- P. K. Roy et al., “Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE071, pp. 3856-3858.
- E. Huttel, B. Barg, A. Jackson, and B. Mountford, “The Vacuum System of the Australian Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF029, pp. 1663-1665.
- R. C. Sah, J. R. Chen, C. C. Kuo, and and G. H. Luo, “Status Report on the Synchrotron Radiation Research Center”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4B003, pp. 32-35.
- D. Li, J. W. Staples, and S. P. Virostek, “Detailed Modeling of the SNS RFQ Structure with CST Microwave Studio”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP008, pp. 580-582.
- D. M?ñder et al., “Construction of the MYRRHA Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2221-2223.
- D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
- K. Chalut, V. N. Litvinenko, and V. Pinayev, “Novel Method for Phase-Space Tomography of Rapidly Evolving E-beams”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS53, pp. XX-XX.
- J. Oegren, A. K. Bhattacharyya, M. Holz, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “Beam-Based Alignment Studies at CTF3 Using the Octupole Component of CLIC Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 371-373.
- Y. Lei et al., “Power-Conditioning Cavity Design and Measurement of the Coaxial Coupler for the Injector of XiPAF Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4218-4220.
- G. Bronca, C. Lefrancois, J. Perot, and J. P. Pouillange, “Pulsed Superconducting Magnet Work at Saclay”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 636-639.
- L. K. Chen, F. R. Huson, W. W. MacKay, S. Ohnuma, and C. A. Swenson, “A Compact X-Ray Lithography Lattice using Superferric Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1242-1245.
- H. Zen et al., “Beam Energy Compensation by RF Amplitude Control for Thermionic RF Gun and Linac Based Mid-infrared FEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC113, pp. 1329-1331.
- Y. Lozeev, M. Gusarova, M. A. Guzov, E. N. Indiushnii, A. I. Makarov, and S. M. Polozov, “Optimization of the RFQ Electrode Construction for Multipactor Discharge Prevention”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC11, unpublished.
- S. Minaev et al., “Particle Dynamics Simulation in Wobbler System for Hollow High Energy Heavy Ion Beam Formation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP041, pp. 2193-2195.
Back to search