JaCoW Logo

Reference Search

Favourites


For Word

[n]	M. W. Guetg and S. Reiche, “Optimization of FEL Performanceby Dispersion-based Beam-tilt Correction”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP016, pp. 714-717. 
[n]	M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675. 
[n]	J. Jacob, P. B. Borowiec, A. D'Elia, G. Gautier, and V. Serri?¿re, “ESRF-EBS 352.37 MHz Radio Frequency System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 395-398. doi:10.18429/JACoW-IPAC2021-MOPAB108
[n]	L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 278-280. doi:10.18429/JACoW-IBIC2017-TUPWC01
[n]	V. Roger et al., “Optimization of static heat loads of the PIP-II cryomodules based on prototype HB650 cryomodule test results”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 695-698. doi:10.18429/JACoW-LINAC2024-THPB029
[n]	N. Ohuchi et al., “Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1174-1176. doi:10.18429/JACoW-IPAC2016-TUPMB033
[n]	Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM071, unpublished. 
[n]	E. Echeverria, A. Galdi, C. Pennington, J. Maxson, M. Hines, and Q. Zhu, “Correlation between the stoichiometry of $Cs_xSb_y$ and its photoemission properties and oxidation response”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA134, unpublished. 
[n]	R. Neswold and CA. King, “Further Developments in Generating Type-Safe Messaging”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS023, pp. 836-839. 
[n]	S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2326-2329. doi:10.18429/JACoW-IPAC2018-WEPAL065
[n]	Y. Gao et al., “Experiment of Bayesian Optimization for Trajectory Alignment at Low Energy RHIC Electron Cooler”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 987-990. doi:10.18429/JACoW-IPAC2022-TUPOST054
[n]	R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2301-2303. 
[n]	L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
[n]	G. Shen et al., “High Performance Data Acquisition for a Modern Accelerator”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 303-306. doi:10.18429/JACoW-IBIC2020-FRAO05
[n]	D. P. Piso, M. Rescic, G. Cijan, and R. Schmidt, “A PLC Test Bench at ESS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3171-3173. doi:10.18429/JACoW-IPAC2014-THPRO118
[n]	J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143. 
[n]	M. Sekiguchi and Y. Shida, “Orbit Analysis of the Spiral Inflector for Cyclotrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 860-863. 
[n]	Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789. 
[n]	S. Jackson et al., “Configuration and Validation of the LHC Beam Loss Monitoring System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB31, pp. 240-242. 
[n]	C. Timossi and H. Nishimura, “Accelerator Control Software Construction Based on Software Object Components”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V013, pp. 805-807. 
[n]	V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757. 
[n]	D. Barr and W. Sellyey, “Digital Signal Processing for the APS Transverse and Longitudinal Damping System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ19, pp. 2992-2994. 
[n]	D. Tarazona, “Muon momentum distribution from radial beam measurements in the Muon g-2 Storage Ring at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA061, unpublished. 
[n]	K. Wootton et al., “A laser plasma wakefield electron accelerator for the Advanced Photon Source and Low-Energy Accelerator Facility”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB002, unpublished. 
[n]	S. Posen et al., “Nb?Sn at Fermilab: Exploring Performance”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 818-822. doi:10.18429/JACoW-SRF2019-THFUB1
[n]	D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Updates on the Optic Corrections of FCC-hh”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 133-136. doi:10.18429/JACoW-IPAC2018-MOPMF023
[n]	J.-M. Christmann et al., “Efficient nonlinear simulations of the fast corrector magnets for PETRA IV”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB030, unpublished. 
[n]	A. Markovik, G. P?Âplau, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Dynamics of Ion Distributions in Beam Guiding Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1668-1670. doi:10.18429/JACoW-IPAC2014-TUPRI046
[n]	P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348. 
[n]	K. P. McCandless et al., “The Role of Data Driven Models in Optimizing the Operation of the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCB02, pp. 1426-1429. 
[n]	J. Juanhuix and M. Traveria, “Magnetic design and light characteristics of a Wiggler for the LLS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21G, pp. 2228-2230. 
[n]	K. Yasuoka, “Future Medical Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEIC02, pp. 2152-2155. 
[n]	L. Wu, X. Guan, X. W. Wang, S. X. Zheng, B. C. Wang, and G. Xialing, “Magnetic Center Position and Tilt Angle of Quadrupole by Vibration Wire Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1127-1129. doi:10.18429/JACoW-IPAC2016-TUPMB010
[n]	B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792. 
[n]	K. Wootton et al., “A laser plasma wakefield electron accelerator for the Advanced Photon Source and Low-Energy Accelerator Facility”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 629-632. doi:10.18429/JACoW-LINAC2024-THAA012
[n]	B. Harss et al., “The Production and Transport of Radioactive $^{17}$F at ATLAS for Research”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W002, pp. 2696-2698. 
[n]	W. Busse, “Invited Paper: The Computer Aided Control System of the VICKSI Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-01, pp. 2300-2305. 
[n]	L. Piersanti et al., “Review of the ELI-NP-GBS Low Level RF and Synchronization Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2162-2165. doi:10.18429/JACoW-IPAC2018-WEPAL010
[n]	G. D'Auria et al., “The New Photoinjector for the Fermi Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN028, pp. 974-976. 
[n]	H. Bender, J. M. Potter, D. D. Schwellenbach, R. Sturgess, and C. P. Trainham, “Variable Energy 2-MeV S-Band Linac for X-ray and Other Applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP139, pp. 1845-1847. 
[n]	S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213. 
[n]	T. Zhang, D. Wang, Z. T. Zhao, and X. M. Yang, “Design of a Wavelength Continuously Tunable Ultraviolet Coherent Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP057, pp. 1727-1728. 
[n]	W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713. 
[n]	V. Chouhan, D. Smith, G. Wu, and T. Ring, “Study of mechanical grinding effects on niobium surface”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 689-691. doi:10.18429/JACoW-LINAC2024-THPB027
[n]	M. Bartolini, L. R. Brederode, M. Deegan, M. Miccolis, N. P. Rees, and J. Santander-Vela, “Scaling Agile for the Square Kilometre Array”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1080. doi:10.18429/JACoW-ICALEPCS2019-WEPHA011
[n]	S. D. Nelson, G. J. Caporaso, and B. R. Poole, “Electromagnetic Simulations of Linear Proton Accelerator Structures Using Dielectric Wall Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS058, pp. 1784-1786. 
[n]	T. Petersen et al., “Nb3Sn Technology for Low-beta linacs”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 641-644. doi:10.18429/JACoW-LINAC2024-THPB006

For LaTeX

Use Complete Form

For BibTeX

References

Back to search