Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
[n] H. Lancaster, “An Analytical Solution for the Electrical Properties of a Radio-Frequency Quadrupole (RFQ) with Simple Vanes”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H12, pp. 293-295.
[n] J. C. Sheppard et al., “Implementation of Nonintercepting Energy Spread Monitors”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 757-760.
[n] R. Fuja, A. E. Grelick, D. Meyer, G. Pile, and M. White, “Constant-Current Charging Supplies for the Advanced Photon Source (APS) Linear Accelerator Modulators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P079, pp. 1269-1271.
[n] J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147.
[n] J. P. Blaser, Ch. Perret, M. Barbier, and J. Dutrannois, “Shielding and Activation of High-Intensity Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D06, pp. XX-XX.
[n] M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX.
[n] G. Carcassi, “A REST service for IRMIS3”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper FRA002, pp. 925-927.
[n] L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n] H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2927-2930. doi:10.18429/JACoW-IPAC2015-WEPMN008
[n] H.-H. Chen et al., “Design of Mechanical Structure and Cryostat for IASW Superconducting Wiggler at NSRRC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN091, pp. 374-376.
[n] M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325.
[n] M. Lonza et al., “Beam-based Feedbacks for the FERMI@Elettra Free Electron Laser”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB033, pp. 2758-2760.
[n] A. Regan and C. Ziomek, “APT LLRF Control System Model Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P044, pp. 2338-2340.
[n] S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
[n] P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX.
[n] R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
[n] S. K. Esin et al., “Commissioning of New Injection Line at INR Proton Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA74, pp. 3561-3563.
[n] J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
[n] A.-M. Valente, C. Benvenuti, S. Calatroni, P. Darriulat, M. A. Peck, and C. A. Van, “Study of the Residual Resistance of Superconducting Niobium Films at 1.5 GHz”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA004, pp. 550-554.
[n] K. Saito et al., “R D of Nb/Cu Clad Seamless cavities at KEK”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT019, pp. XX-XX.
[n] K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
[n] J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
[n] A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
[n] K. A. Thompson and R. D. Ruth, “Transverse and Longitudinal Coupled Bunch Instabilities in Trains of Closely Spaced Bunches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 792-795.
[n] M. Ferianis et al., “Beam Diagnostics at ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1497-1500.
[n] L. Dalesio et al., “The LEDA Control System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP2, pp. 652-654.
[n] S. V. Kutsaev et al., “Microwave Thermionic Electron Gun for Synchrotron Light Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2189-2192. doi:10.18429/JACoW-IPAC2019-TUPTS113
[n] V. G. Dudnikov et al., “Radio Frequency Surface Plasma Source With Solenoidal Magnetic Field”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 902-905. doi:10.18429/JACoW-LINAC2016-THPLR026
[n] T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
[n] M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
[n] U. Schumacher, C. Andelfinger, and M. Ulrich, “Collective Acceleration of Protons and Helium Ions in the Garching Era”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 989-992.
[n] J. O. Archambeau, G. W. Bennett, and G. S. Levine, “Application of Proton Radiation Therapy”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1007-1010.
[n] E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
[n] S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 47-51. doi:10.18429/JACoW-IPAC2016-MOZB01
[n] E. Karantzoulis et al., “Top-up Implementation and Operation at Elettra”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA028, pp. 2543-2545.
[n] S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
[n] R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929.
[n] M. Ferianis, M. Bossi, and T. Monaci, “Destructive Beam Diagnostics at ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1500-1503.
[n] Y. Shoji, Y. Minagawa, and Y. Takemura, “Off-Energy Injection Into Newsubaru”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO015, pp. 1913-1915.
[n] A. S. Gurevich, N. A. Ignashin, G. I. Stolyarov, and V. K. Vorobjev, “Routine Observation of a Longitudinal Beam Emittance Behaviour in the IHEP Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1699-1702.
[n] P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 284-289.
[n] W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1157-1160.
[n] C.-H. Chang et al., “Design of an In Archromatic Superconducting Wiggler at NSRRC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF052, pp. 425-427.
[n] A. Carroll et al., “Assembly Techniques Used in Construction of Neutrino Horns at BNL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1734-1737.
[n] S. Koetter, A. Santamaria Garcia, A.-S. Mueller, E. Blomley, E. Bründermann, and M. Schuh, “Online fit of an analytical response matrix model for orbit correction and optical function measurement”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4475-4478. doi:10.18429/JACoW-IPAC2023-THPL025
[n] A. Miura et al., “Bunch Length Measurement of 181 MeV Beam in J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME027, pp. 532-534.
[n] Y. Yang et al., “Progress update on the RF system refurbishment at the APS linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 645-647. doi:10.18429/JACoW-LINAC2024-THPB007
For LaTeX
Use Complete Form
For BibTeX
References
- M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
- H. Lancaster, “An Analytical Solution for the Electrical Properties of a Radio-Frequency Quadrupole (RFQ) with Simple Vanes”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H12, pp. 293-295.
- J. C. Sheppard et al., “Implementation of Nonintercepting Energy Spread Monitors”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 757-760.
- R. Fuja, A. E. Grelick, D. Meyer, G. Pile, and M. White, “Constant-Current Charging Supplies for the Advanced Photon Source (APS) Linear Accelerator Modulators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P079, pp. 1269-1271.
- J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147.
- J. P. Blaser, Ch. Perret, M. Barbier, and J. Dutrannois, “Shielding and Activation of High-Intensity Cyclotrons”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63D06, pp. XX-XX.
- M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX.
- G. Carcassi, “A REST service for IRMIS3”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper FRA002, pp. 925-927.
- L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2584-2586.
- H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2927-2930.
- H.-H. Chen et al., “Design of Mechanical Structure and Cryostat for IASW Superconducting Wiggler at NSRRC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN091, pp. 374-376.
- M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325.
- M. Lonza et al., “Beam-based Feedbacks for the FERMI@Elettra Free Electron Laser”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB033, pp. 2758-2760.
- A. Regan and C. Ziomek, “APT LLRF Control System Model Results”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P044, pp. 2338-2340.
- S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
- P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX.
- R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
- S. K. Esin et al., “Commissioning of New Injection Line at INR Proton Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA74, pp. 3561-3563.
- J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
- A.-M. Valente, C. Benvenuti, S. Calatroni, P. Darriulat, M. A. Peck, and C. A. Van, “Study of the Residual Resistance of Superconducting Niobium Films at 1.5 GHz”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA004, pp. 550-554.
- K. Saito et al., “R D of Nb/Cu Clad Seamless cavities at KEK”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT019, pp. XX-XX.
- K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
- J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
- A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
- K. A. Thompson and R. D. Ruth, “Transverse and Longitudinal Coupled Bunch Instabilities in Trains of Closely Spaced Bunches”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 792-795.
- M. Ferianis et al., “Beam Diagnostics at ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1497-1500.
- L. Dalesio et al., “The LEDA Control System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP2, pp. 652-654.
- S. V. Kutsaev et al., “Microwave Thermionic Electron Gun for Synchrotron Light Sources”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2189-2192.
- V. G. Dudnikov et al., “Radio Frequency Surface Plasma Source With Solenoidal Magnetic Field”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 902-905.
- T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
- M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
- U. Schumacher, C. Andelfinger, and M. Ulrich, “Collective Acceleration of Protons and Helium Ions in the Garching Era”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 989-992.
- J. O. Archambeau, G. W. Bennett, and G. S. Levine, “Application of Proton Radiation Therapy”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1007-1010.
- E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
- S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 47-51.
- E. Karantzoulis et al., “Top-up Implementation and Operation at Elettra”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA028, pp. 2543-2545.
- S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
- R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 926-929.
- M. Ferianis, M. Bossi, and T. Monaci, “Destructive Beam Diagnostics at ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1500-1503.
- Y. Shoji, Y. Minagawa, and Y. Takemura, “Off-Energy Injection Into Newsubaru”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO015, pp. 1913-1915.
- A. S. Gurevich, N. A. Ignashin, G. I. Stolyarov, and V. K. Vorobjev, “Routine Observation of a Longitudinal Beam Emittance Behaviour in the IHEP Accelerator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1699-1702.
- P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 284-289.
- W. B. Sampson, K. E. Robins, and M. G. Thomas, “Magnetoresistance Elements for the Measurement and Control of Harmonics in Superconducting Accelerator Magnets”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1157-1160.
- C.-H. Chang et al., “Design of an In Archromatic Superconducting Wiggler at NSRRC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF052, pp. 425-427.
- A. Carroll et al., “Assembly Techniques Used in Construction of Neutrino Horns at BNL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1734-1737.
- S. Koetter, A. Santamaria Garcia, A.-S. Mueller, E. Blomley, E. Bründermann, and M. Schuh, “Online fit of an analytical response matrix model for orbit correction and optical function measurement”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL025, pp. 4475-4478.
- A. Miura et al., “Bunch Length Measurement of 181 MeV Beam in J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME027, pp. 532-534.
- Y. Yang et al., “Progress update on the RF system refurbishment at the APS linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 645-647.
Back to search