Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Goetz et al., “Simulation Methods for Transverse Beam Size Measurements Using the Heterodyne Near Field Speckles of Hard X-rays”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 272-275. doi:10.18429/JACoW-IBIC2020-THPP33
[n] B. Bolzon, S. Bai, P. Bambade, A. Jeremie, and G. R. White, “Linear Collider Test Facility: Twiss Parameter Analysis at the IP/Post-IP location of the ATF2 beam line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD077, pp. 4458-4460.
[n] M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
[n] D. Douglas et al., “Architectural Considerations for Recirculated and Energy-Recovered Hard XFEL Drivers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4560-4563. doi:10.18429/JACoW-IPAC2018-THPMK106
[n] F. Collamati, M. Boscolo, H. Burkhardt, and R. Kersevan, “Synchrotron Radiation Backgrounds for the FCC-hh Experiments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2031-2034. doi:10.18429/JACoW-IPAC2017-TUPVA004
[n] J. F. Schmidt, W. Hillert, M. Schedler, and J.-P. Thiry, “Measurement of Momentum Compaction Factor via Depolarizing Resonances at ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 811-813. doi:10.18429/JACoW-IPAC2015-MOPHA015
[n] T. Lef?¿vre, “The CLIC Test Facility 3 Instrumentation”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper WEIOTIO02, pp. 323-331.
[n] A. S. Fisher, A. Goldblatt, and T. Lef?¿vre, “The LHC Synchrotron-Light Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB03, pp. 164-166.
[n] V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
[n] V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
[n] R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2472-2474. doi:10.18429/JACoW-IPAC2016-WEPMW023
[n] O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 114-117. doi:10.18429/JACoW-ICALEPCS2017-MODPL07
[n] U. Happek, M. James, K. Jordan, G. A. Krafft, P. Piot, and J. Song, “Measuring and Characterizing Ultrashort Bunches in the Jefferson Lab Free-Electron Laser”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24G, pp. 1580-1582.
[n] S. Mitsunobu et al., “Activities of Superconducting Cavity for KEK B-Factory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J05, pp. XX-XX.
[n] Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 103-105. doi:10.18429/JACoW-RUPAC2016-WECDMH03
[n] Y. Yamamoto et al., “Recent Results of the Vertical Test for 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP074, pp. 996-998.
[n] G. Ambrosio, G. Bellomo, and L. Rossi, “A 300 T/m NbSn Quadrupole for the Low-beta Insertions of the LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP088G, pp. 2290-2292.
[n] P. Emma, G. Annala, and B. Hendricks, “Fermilab's Automated Accelerator Start-Up Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1940-1943.
[n] S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
[n] A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
[n] H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3428-3430. doi:10.18429/JACoW-IPAC2015-WEPTY065
[n] H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
[n] I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
[n] A. Dubrovskiy, “Towards Stable Acceleration in Linacs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 65-67. doi:10.18429/JACoW-IPAC2014-MOPRO003
[n] Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
[n] S. Molloy et al., “Development of the C-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP028, pp. 4009-4011.
[n] C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 631-634. doi:10.18429/JACoW-IPAC2025-MOPS019
[n] M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
[n] S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
[n] P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
[n] L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2335-2337. doi:10.18429/JACoW-IPAC2019-WEPMP015
[n] J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Goetz et al., “Simulation Methods for Transverse Beam Size Measurements Using the Heterodyne Near Field Speckles of Hard X-rays”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 272-275.
- B. Bolzon, S. Bai, P. Bambade, A. Jeremie, and G. R. White, “Linear Collider Test Facility: Twiss Parameter Analysis at the IP/Post-IP location of the ATF2 beam line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD077, pp. 4458-4460.
- M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
- D. Douglas et al., “Architectural Considerations for Recirculated and Energy-Recovered Hard XFEL Drivers”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4560-4563.
- F. Collamati, M. Boscolo, H. Burkhardt, and R. Kersevan, “Synchrotron Radiation Backgrounds for the FCC-hh Experiments”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2031-2034.
- J. F. Schmidt, W. Hillert, M. Schedler, and J.-P. Thiry, “Measurement of Momentum Compaction Factor via Depolarizing Resonances at ELSA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 811-813.
- T. Lef?¿vre, “The CLIC Test Facility 3 Instrumentation”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper WEIOTIO02, pp. 323-331.
- A. S. Fisher, A. Goldblatt, and T. Lef?¿vre, “The LHC Synchrotron-Light Monitors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB03, pp. 164-166.
- V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
- V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
- R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2472-2474.
- O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 114-117.
- U. Happek, M. James, K. Jordan, G. A. Krafft, P. Piot, and J. Song, “Measuring and Characterizing Ultrashort Bunches in the Jefferson Lab Free-Electron Laser”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24G, pp. 1580-1582.
- S. Mitsunobu et al., “Activities of Superconducting Cavity for KEK B-Factory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J05, pp. XX-XX.
- Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 103-105.
- Y. Yamamoto et al., “Recent Results of the Vertical Test for 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP074, pp. 996-998.
- G. Ambrosio, G. Bellomo, and L. Rossi, “A 300 T/m NbSn Quadrupole for the Low-beta Insertions of the LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP088G, pp. 2290-2292.
- P. Emma, G. Annala, and B. Hendricks, “Fermilab's Automated Accelerator Start-Up Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1940-1943.
- S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
- A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
- H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3428-3430.
- H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
- I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
- A. Dubrovskiy, “Towards Stable Acceleration in Linacs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 65-67.
- Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
- S. Molloy et al., “Development of the C-Band BPM System for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP028, pp. 4009-4011.
- C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS019, pp. 631-634.
- M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
- S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
- P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
- L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2335-2337.
- J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
Back to search