Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] Y. Wada, T. Kubota, and A. Ogata, “Neutral Beam Generation by Laser Irradiation of Thin Foils”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI013, pp. 1747-1749.
[n] A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 627-633. doi:10.18429/JACoW-SRF2023-WEIXA03
[n] A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2154-2157. doi:10.18429/JACoW-IPAC2023-TUPL172
[n] R. Esposito et al., “Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3555-3558. doi:10.18429/JACoW-IPAC2021-WEPAB364
[n] T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1302-1304. doi:10.18429/JACoW-IPAC2024-TUPG35
[n] A. Scheinker, “Adaptive Control and Machine Learning for Particle Accelerator Beam Control and Diagnostics”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 466-472. doi:10.18429/JACoW-IBIC2021-THOB03
[n] M. J. Barnes et al., “Mitigation of High Voltage Breakdown of the Beam Screen of a CERN SPS Injection Kicker Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2868-2871. doi:10.18429/JACoW-IPAC2022-THPOTK043
[n] B. J. Wang, Y. H. Guo, R. Wang, and N. Xie, “Design of Magnet Measurement System Based on Multi-Hall Sensor”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 653-655. doi:10.18429/JACoW-ICALEPCS2021-WEPV013
[n] M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453.
[n] E. G. Parozzi et al., “The ENUBET Multi Momentum Secondary Beamline Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3053-3056. doi:10.18429/JACoW-IPAC2021-WEPAB187
[n] N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 90-92. doi:10.18429/JACoW-NAPAC2022-MOPA19
[n] W. Cichalewski and K. Klys, “Software Tools for Hardware Elliptical Cavity Simulator Management and Configuration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1154. doi:10.18429/JACoW-ICALEPCS2019-WEPHA034
[n] D. Walz, R. Helm, J. Irwin, and W. R. Nelson, “Conventional Collimation and Linac Protection”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 185-188.
[n] S. Morales Vigo et al., “LHC BLM-based beam loss pattern recognition algorithm for off-momentum losses”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3137-3140. doi:10.18429/JACoW-IPAC2025-THPS084
[n] A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Energy Ramping at Siberia-2”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD008, pp. 581-583.
[n] U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 25-29. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO01
[n] D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
[n] E. Naselli et al., “A novel test-facility for ECRIS plasma diagnostics: optical spectroscopy, X-ray imaging and spectroscopy, mm-wave polarimetry”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUD2, unpublished.
[n] W. A. Frank, B. R. Aljamal, and R. A. Washington, “Digitisation of the Analogue Waveform System at ISIS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 169-172. doi:10.18429/JACoW-ICALEPCS2021-MOPV020
[n] M. Fawley, “High Order Calculation of the Multipole Content of Three Dimensional Electrostatic Geometrics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3020-3023.
[n] V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
[n] W. Hartung et al., “20 MV/m Accelerating Gradient with Heat Treatment of a Six Cell, 1.5 GHz Cavity for TESLA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 921-924.
[n] G. A. Karamysheva, Yu. N. Denisov, and O. Karamyshev, “Acceleration of Low Charge Krypton Ions in the CYTRACK Cyclotron”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD041, pp. 632-634.
[n] C. Su, X. Chen, and Z. Wang, “Reinforcement learning-based beam tuning for CiADS room temperature front-end prototype”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB056, unpublished.
[n] T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
[n] S. L. Andrianov, M. F. Moisio, and C. R. Roncolato, “The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA27, pp. 94-96.
[n] X. R. Resende, M. B. Alves, L. Liu, A. C. S. Oliveira, J. V. Quentino, and F. H. de S?í, “Sirius Injection Optimization”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2672-2674. doi:10.18429/JACoW-IPAC2022-THPOPT038
[n] N. A. Wilkinson and D. Dohan, “Synchronous Message-Based Communication for Distributed Heterogeneous Systems”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 302-305. doi:10.18429/JACoW-ICALEPCS1991-S08NC04
[n] M. Slupecki, “Future challenges for CERN’s ion injector complex”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 68-73. doi:10.18429/JACoW-HIAT2025-TUX01
[n] T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336.
[n] H. Padamsee, J. Kirchgessner, P. Barnes, D. Metzger, and A. Helser, “Test Results and Design Considerations for a 500 MHz, 500 kW Vacuum Window for CESR-B”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1399-1402.
[n] D. Rees and W. Roybal, “Collector Failures on 350-MHz, 1.2-MW CW Klystrons at the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE12, pp. 998-1000.
[n] X. Liu et al., “Optical cavity status for SSMB at Tsinghua”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG71, unpublished.
[n] C. Hovjat, M. Joy, and R. C. Webber, “Stripping Foils for Multiturn Charge Exchange Injection into the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4009-4012.
[n] M. Yi, Z. Wang, and S. Liu, “Beam dynamics design of the superconductiong section of a 100 mA superconducting linac”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEP22, unpublished.
[n] M. Luong, B. Bonin, H. Long, and H. Safa, “Role of Adsorbates on Current Fluctuations in DC Field Emission”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C27, pp. 509-511.
[n] J. Cheng et al., “Initial Operation of a High Power, K-Band, Harmonic Gyroklystron for Accelerator Applications”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2667-2670.
[n] S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 226-229. doi:10.18429/JACoW-IPAC2022-MOPOPT002
[n] S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished.
[n] A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223.
[n] G. K. Deyu, R. H. Blick, I. González Díaz-Palacio, W. Hillert, M. Wenskat, and R. Zierold, “Successful Al₂O₃ Coating of Superconducting Niobium Cavities by Thermal ALD”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 104-108. doi:10.18429/JACoW-SRF2023-MOPMB016
[n] S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n] P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51
[n] E. Granados et al., “Optical and laser systems for the AWAKE run 2C experiment”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1604-1607. doi:10.18429/JACoW-IPAC2025-TUPS111
[n] H. Damerau, A. Huschauer, A. Lasheen, M. Cuvelier, M. Vadai, and T. Prebibaj, “Intensity reach of the barrier-bucket multi-turn transfer for fixed-target proton beam from PS to SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1710-1713. doi:10.18429/JACoW-IPAC2024-TUPS32
[n] A. Sitnikov, A. Golubev, T. Kulevoy, and S. A. Visotski, “Electrodes Form Optimization of RF Deflecting System Wobbler for FAIR Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA26, pp. 91-93.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Wada, T. Kubota, and A. Ogata, “Neutral Beam Generation by Laser Irradiation of Thin Foils”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI013, pp. 1747-1749.
- A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEIXA03, pp. 627-633.
- A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL172, pp. 2154-2157.
- R. Esposito et al., “Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3555-3558.
- T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG35, pp. 1302-1304.
- A. Scheinker, “Adaptive Control and Machine Learning for Particle Accelerator Beam Control and Diagnostics”, in Proc. 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, pp. 466-472.
- M. J. Barnes et al., “Mitigation of High Voltage Breakdown of the Beam Screen of a CERN SPS Injection Kicker Magnet”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2868-2871.
- B. J. Wang, Y. H. Guo, R. Wang, and N. Xie, “Design of Magnet Measurement System Based on Multi-Hall Sensor”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 653-655.
- M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453.
- E. G. Parozzi et al., “The ENUBET Multi Momentum Secondary Beamline Design”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3053-3056.
- N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 90-92.
- W. Cichalewski and K. Klys, “Software Tools for Hardware Elliptical Cavity Simulator Management and Configuration”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1154.
- D. Walz, R. Helm, J. Irwin, and W. R. Nelson, “Conventional Collimation and Linac Protection”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 185-188.
- S. Morales Vigo et al., “LHC BLM-based beam loss pattern recognition algorithm for off-momentum losses”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS084, pp. 3137-3140.
- A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Energy Ramping at Siberia-2”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD008, pp. 581-583.
- U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO01, pp. 25-29.
- D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
- E. Naselli et al., “A novel test-facility for ECRIS plasma diagnostics: optical spectroscopy, X-ray imaging and spectroscopy, mm-wave polarimetry”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper TUD2, unpublished.
- W. A. Frank, B. R. Aljamal, and R. A. Washington, “Digitisation of the Analogue Waveform System at ISIS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 169-172.
- M. Fawley, “High Order Calculation of the Multipole Content of Three Dimensional Electrostatic Geometrics”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3020-3023.
- V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
- W. Hartung et al., “20 MV/m Accelerating Gradient with Heat Treatment of a Six Cell, 1.5 GHz Cavity for TESLA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 921-924.
- G. A. Karamysheva, Yu. N. Denisov, and O. Karamyshev, “Acceleration of Low Charge Krypton Ions in the CYTRACK Cyclotron”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD041, pp. 632-634.
- C. Su, X. Chen, and Z. Wang, “Reinforcement learning-based beam tuning for CiADS room temperature front-end prototype”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB056, unpublished.
- T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
- S. L. Andrianov, M. F. Moisio, and C. R. Roncolato, “The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA27, pp. 94-96.
- X. R. Resende, M. B. Alves, L. Liu, A. C. S. Oliveira, J. V. Quentino, and F. H. de S?í, “Sirius Injection Optimization”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2672-2674.
- N. A. Wilkinson and D. Dohan, “Synchronous Message-Based Communication for Distributed Heterogeneous Systems”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC04, pp. 302-305.
- M. Slupecki, “Future challenges for CERN’s ion injector complex”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUX01, pp. 68-73.
- T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336.
- H. Padamsee, J. Kirchgessner, P. Barnes, D. Metzger, and A. Helser, “Test Results and Design Considerations for a 500 MHz, 500 kW Vacuum Window for CESR-B”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1399-1402.
- D. Rees and W. Roybal, “Collector Failures on 350-MHz, 1.2-MW CW Klystrons at the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE12, pp. 998-1000.
- X. Liu et al., “Optical cavity status for SSMB at Tsinghua”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG71, unpublished.
- C. Hovjat, M. Joy, and R. C. Webber, “Stripping Foils for Multiturn Charge Exchange Injection into the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4009-4012.
- M. Yi, Z. Wang, and S. Liu, “Beam dynamics design of the superconductiong section of a 100 mA superconducting linac”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEP22, unpublished.
- M. Luong, B. Bonin, H. Long, and H. Safa, “Role of Adsorbates on Current Fluctuations in DC Field Emission”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C27, pp. 509-511.
- J. Cheng et al., “Initial Operation of a High Power, K-Band, Harmonic Gyroklystron for Accelerator Applications”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2667-2670.
- S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 226-229.
- S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished.
- A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223.
- G. K. Deyu, R. H. Blick, I. González Díaz-Palacio, W. Hillert, M. Wenskat, and R. Zierold, “Successful Al₂O₃ Coating of Superconducting Niobium Cavities by Thermal ALD”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB016, pp. 104-108.
- S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM068, pp. 1315-1318.
- P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS51, pp. 836-839.
- E. Granados et al., “Optical and laser systems for the AWAKE run 2C experiment”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS111, pp. 1604-1607.
- H. Damerau, A. Huschauer, A. Lasheen, M. Cuvelier, M. Vadai, and T. Prebibaj, “Intensity reach of the barrier-bucket multi-turn transfer for fixed-target proton beam from PS to SPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS32, pp. 1710-1713.
- A. Sitnikov, A. Golubev, T. Kulevoy, and S. A. Visotski, “Electrodes Form Optimization of RF Deflecting System Wobbler for FAIR Project”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA26, pp. 91-93.
Back to search