Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB029, unpublished.
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n] G. H. Luo et al., “Asynchronized Energy Ramping at SRRC Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA04, pp. 201-203.
[n] R. Hensley, E. Prebys, and S. Tripathy, “Synchronization and phase locking of resonant magnet power supplies for Mu2e experiment at Fermilab”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4139-4141. doi:10.18429/JACoW-IPAC2023-THPA075
[n] F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 403. doi:10.18429/JACoW-ICALEPCS2019-MOPHA085
[n] A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
[n] A. D. Casey, E. J. Bond, B. A. Conrad, M. S. Hutton, P. D. Reisdorf, and S. M. Reisdorf, “National Ignition Facility (NIF) Experiment Interface Consolidation and Simplification to Support Operational User Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1143-1146. doi:10.18429/JACoW-ICALEPCS2015-THHC3O05
[n] C. H. Kuo et al., “The Alarm and Downtime Analysis Development in the TLS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 439-441. doi:10.18429/JACoW-ICALEPCS2017-TUPHA031
[n] H. Schopper, “Research with AVF Cyclotrons in Europe”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-002, pp. XX-XX.
[n] G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
[n] D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 467-470. doi:10.18429/JACoW-IPAC2024-MOPR06
[n] S. Jensen et al., “SIP4C/C++ at CERN - Status and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 785-788. doi:10.18429/JACoW-ICALEPCS2017-TUPHA161
[n] M. A. Fedorov, J. R. Castro Morales, V. Pacheu, and E. F. Wilson, “New Visual Alignment Sequencer Tool Improves Efficiency of Shot Operations at the National Ignition Facility (NIF)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 328-333. doi:10.18429/JACoW-ICALEPCS2017-TUMPA01
[n] C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
[n] R. Baartman, M. K. Craddock, G. Dutto, T. Kuo, and B. Milton, “A Possible High Current H- Injector for Cyclotron-Based Energy Amplifier" Accelerator"”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP110G, pp. 593-595.
[n] T. J. Ring, M. B. Quinlan, and G. Wu, “Low Particulates Nitrogen Purge and Backfill during Prototype HB650 Cryomodule String Assembly”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 765-767. doi:10.18429/JACoW-SRF2023-WEPWB076
[n] G. Gallo, L. Allegra, G. Costa, E. Messina, and E. Zappal?â, “Mechanical Aspects of the LNS Superconducting Cyclotron Upgrade”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 322-324. doi:10.18429/JACoW-Cyclotrons2016-THP09
[n] H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
[n] Y. Chao, J. Crisp, S. Holmes, J. Lackey, and W. Merz, “Improving the Fermilab Booster Emittance”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 663-666.
[n] N. N. Alexeev et al., “ITEP Proton Synchrotron Reconstruction”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1728-1731.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
[n] N. Jakhar, M. Kashyap, S. Kashyap, S. Kumar, J. Sharma, and C. Thakur, “Design of Pelletron accelerator using novel accelerating tube without gap insulators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS140, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB029, this conference.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 949.
- G. H. Luo et al., “Asynchronized Energy Ramping at SRRC Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA04, pp. 201-203.
- R. Hensley, E. Prebys, and S. Tripathy, “Synchronization and phase locking of resonant magnet power supplies for Mu2e experiment at Fermilab”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA075, pp. 4139-4141.
- F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 403.
- A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
- A. D. Casey, E. J. Bond, B. A. Conrad, M. S. Hutton, P. D. Reisdorf, and S. M. Reisdorf, “National Ignition Facility (NIF) Experiment Interface Consolidation and Simplification to Support Operational User Facility”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1143-1146.
- C. H. Kuo et al., “The Alarm and Downtime Analysis Development in the TLS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 439-441.
- H. Schopper, “Research with AVF Cyclotrons in Europe”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-002, pp. XX-XX.
- G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
- D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR06, pp. 467-470.
- S. Jensen et al., “SIP4C/C++ at CERN - Status and Lessons Learned”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 785-788.
- M. A. Fedorov, J. R. Castro Morales, V. Pacheu, and E. F. Wilson, “New Visual Alignment Sequencer Tool Improves Efficiency of Shot Operations at the National Ignition Facility (NIF)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 328-333.
- C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
- R. Baartman, M. K. Craddock, G. Dutto, T. Kuo, and B. Milton, “A Possible High Current H- Injector for Cyclotron-Based Energy Amplifier" Accelerator"”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP110G, pp. 593-595.
- T. J. Ring, M. B. Quinlan, and G. Wu, “Low Particulates Nitrogen Purge and Backfill during Prototype HB650 Cryomodule String Assembly”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB076, pp. 765-767.
- G. Gallo, L. Allegra, G. Costa, E. Messina, and E. Zappal?â, “Mechanical Aspects of the LNS Superconducting Cyclotron Upgrade”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 322-324.
- H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
- Y. Chao, J. Crisp, S. Holmes, J. Lackey, and W. Merz, “Improving the Fermilab Booster Emittance”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 663-666.
- N. N. Alexeev et al., “ITEP Proton Synchrotron Reconstruction”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1728-1731.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
- N. Jakhar, M. Kashyap, S. Kashyap, S. Kumar, J. Sharma, and C. Thakur, “Design of Pelletron accelerator using novel accelerating tube without gap insulators”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS140, this conference.
Back to search