Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Luo, Z. Ni, X. Xie, and X. Zhou, “Laser Damage Image Pre-processing Based on Total Variation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 272-275. doi:10.18429/JACoW-ICALEPCS2017-TUCPA05
[n] P. A. McIntosh et al., “Development of a Prototype Superconducting CW Cavity and Cryomodule for Energy Recovery”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH161, pp. 436-438.
[n] G. Cheng et al., “Mechanical Design of a New Injector Cryomodule 2-Cell Cavity at CEBAF”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC47, pp. 880-882.
[n] M. Fujieda et al., “MA-Loaded Cavities For Barrier Bucket Experiment”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP14G, pp. 1796-1798.
[n] D. M. Dykes, P. A. McIntosh, M. W. Poole, and V. P. Suller, “Superconducting RF Systems for Light Sources?”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A01, pp. 2034-2036.
[n] N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
[n] Y. Zhang and P. Chu, “Drifting Beam Application for SNS Superconducting Cavity Setting”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP084, pp. 454-456.
[n] R. J. L. Fenning et al., “An FFAG Transport Line for the PAMELA Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP022, pp. 3741-3743.
[n] A. V. Pavlenko, A. M. Batrakov, D. Shichkov, and P. V. Vagin, “Multimode Digital Integrators For Precise Magnetic Measurements”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD032, pp. 617-619.
[n] C. Kim, G. H. Kim, J. U. Kim, N. Hafz, H. Suk, and I. S. Ko, “Electron Beam Generation from Self-Modulated Laser Wakefileld Accelerator”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99913, pp. XX-XX.
[n] D. S. G. Higgins, M. J. Collier, C. L. Dawson, and P. A. McIntosh, “An Engineering Analysis of a New Perturbation Measurement Test Rig”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1998-2001.
[n] E. V. Valetov and M. Berz, “Main and Fringe Field Computations for the Electrostatic Quadrupoles of the Muon g-2 Experiment Storage Ring”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 313-319. doi:10.18429/JACoW-ICAP2018-TUPAG22
[n] C. L. Dawson, D. M. Dykes, and P. A. McIntosh, “Temperature Dependent Higher Order Modes HOM in the SRS Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP020L, pp. 1961-1963.
[n] M. Cejp, D. Zielinski, and R. Murillo-Garcia, “Software architecture of FGC4, CERN’s next-generation power converter control platform”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3754-3757. doi:10.18429/JACoW-IPAC2023-WEPM080
[n] P. A. McIntosh, C. D. Beard, D. M. Dykes, and A. J. Moss, “RF Requirements for the 4GLS Linac Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH162, pp. 439-441.
[n] H. Hotchi, T. Asami, S. Igarashi, T. Koseki, Y. Sato, and T. Yasui, “Numerical simulation study towards 1.3-MW beam operation at J-PARC MR”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2316-2319. doi:10.18429/JACoW-IPAC2023-TUPM055
[n] C. Sun et al., “Pseudo Single Bunch with Adjustable Frequency”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO22, pp. 285-287.
[n] A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4248-4251. doi:10.18429/JACoW-IPAC2019-THPTS062
[n] D. M. Dykes and P. A. McIntosh, “Higher Order Mode HOM Induced Longitudinal Coupled Bunch LCB Instabilities at the SRS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP019L, pp. 1135-1137.
[n] X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
[n] T. Natsui, Y. Ogawa, M. Yoshida, and X. Zhou, “High Charge Low Emittance RF Gun for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD057, pp. 1533-1535.
[n] K. Peetermans, F. Lemery, and I. Zagorodnov, “Cherenkov waveguide design for THz production at the EuXFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM032, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Luo, Z. Ni, X. Xie, and X. Zhou, “Laser Damage Image Pre-processing Based on Total Variation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 272-275.
- P. A. McIntosh et al., “Development of a Prototype Superconducting CW Cavity and Cryomodule for Energy Recovery”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH161, pp. 436-438.
- G. Cheng et al., “Mechanical Design of a New Injector Cryomodule 2-Cell Cavity at CEBAF”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC47, pp. 880-882.
- M. Fujieda et al., “MA-Loaded Cavities For Barrier Bucket Experiment”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP14G, pp. 1796-1798.
- D. M. Dykes, P. A. McIntosh, M. W. Poole, and V. P. Suller, “Superconducting RF Systems for Light Sources?”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A01, pp. 2034-2036.
- N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
- Y. Zhang and P. Chu, “Drifting Beam Application for SNS Superconducting Cavity Setting”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP084, pp. 454-456.
- R. J. L. Fenning et al., “An FFAG Transport Line for the PAMELA Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP022, pp. 3741-3743.
- A. V. Pavlenko, A. M. Batrakov, D. Shichkov, and P. V. Vagin, “Multimode Digital Integrators For Precise Magnetic Measurements”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD032, pp. 617-619.
- C. Kim, G. H. Kim, J. U. Kim, N. Hafz, H. Suk, and I. S. Ko, “Electron Beam Generation from Self-Modulated Laser Wakefileld Accelerator”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99913, pp. XX-XX.
- D. S. G. Higgins, M. J. Collier, C. L. Dawson, and P. A. McIntosh, “An Engineering Analysis of a New Perturbation Measurement Test Rig”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1998-2001.
- E. V. Valetov and M. Berz, “Main and Fringe Field Computations for the Electrostatic Quadrupoles of the Muon g-2 Experiment Storage Ring”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 313-319.
- C. L. Dawson, D. M. Dykes, and P. A. McIntosh, “Temperature Dependent Higher Order Modes HOM in the SRS Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP020L, pp. 1961-1963.
- M. Cejp, D. Zielinski, and R. Murillo-Garcia, “Software architecture of FGC4, CERN’s next-generation power converter control platform”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM080, pp. 3754-3757.
- P. A. McIntosh, C. D. Beard, D. M. Dykes, and A. J. Moss, “RF Requirements for the 4GLS Linac Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH162, pp. 439-441.
- H. Hotchi, T. Asami, S. Igarashi, T. Koseki, Y. Sato, and T. Yasui, “Numerical simulation study towards 1.3-MW beam operation at J-PARC MR”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM055, pp. 2316-2319.
- C. Sun et al., “Pseudo Single Bunch with Adjustable Frequency”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO22, pp. 285-287.
- A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4248-4251.
- D. M. Dykes and P. A. McIntosh, “Higher Order Mode HOM Induced Longitudinal Coupled Bunch LCB Instabilities at the SRS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP019L, pp. 1135-1137.
- X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
- T. Natsui, Y. Ogawa, M. Yoshida, and X. Zhou, “High Charge Low Emittance RF Gun for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD057, pp. 1533-1535.
- K. Peetermans, F. Lemery, and I. Zagorodnov, “Cherenkov waveguide design for THz production at the EuXFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM032, this conference.
Back to search