Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Marsili, E. B. Holzer, A. Nordt, and M. Sapinski, “From Data Storage towards Decision Making: LHC Technical Data Integration and Analysis”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN017, pp. 131-133.
[n] K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 876-878. doi:10.18429/JACoW-LINAC2016-THPLR015
[n] F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2011, unpublished.
[n] J. Kulesza, N. Chen, and A. Deyhim, “Design of Control Instrumentation of two In-Vacuum Undulators IVU25s”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS026, pp. 1236-1238.
[n] E. Gschwendtner et al., “Performance and Operational Experience of the CNGS Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC046, pp. 4164-4166.
[n] A. Lokey and S. M. Lidia, “Status of Gas Sheet Monitor for Profile Measurements at FRIB”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 410-412. doi:10.18429/JACoW-IBIC2023-WEP027
[n] J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
[n] B. Sakowicz, M. Kaminski, D. R. Makowski, P. Mazur, A. Napieralski, and A. Piotrowski, “Asset Management Application for a LLRF Control System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP040, pp. 880-882.
[n] K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
[n] B. Goddard et al., “The Effects of LHC Civil Engineering on the SPS and LEP Machines”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP16H, pp. 412-414.
[n] W. Fan et al., “Simulation Study of Intrabeam Scattering in Low Emittance Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP090, pp. 1639-1641.
[n] M. Modena, A. V. Aloev, E. Solodko, P. A. Thonet, and A. S. Vorozhtsov, “Status of CLIC Magnets Studies and R&D”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1350-1353. doi:10.18429/JACoW-IPAC2014-TUPME007
[n] W. Bialowons et al., “Wake Field Acceleration”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH1-3, pp. 398-404.
[n] G. Arduini, T. Bohl, H. Burkhardt, E. Metral, G. Rumolo, and B. Salvant, “Fast Vertical Single-Bunch Instability at Injection in the CERN SPS - An Update”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN065, pp. 4162-4164.
[n] M. D. Hildreth et al., “The Straightness Monitor System at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE100, pp. 1218-1220.
[n] J. Seeman et al., “Observation of the Beam-Beam Limit in CESR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2033-2036.
[n] M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
[n] A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
[n] J. Alessi, “High Current Polarized Proton Sources”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-04, pp. 465-469.
[n] E. A. Crosbie and P. V. Livdahl, “Matching and Alignment from the Linac to the Zero Gradient Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 799-804.
[n] J. Badier et al., “Observation of Transverse Polarization in LEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 147-150.
[n] P. Evtushenko et al., “Electron Beam Diagnostics of the JLab UV FEL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCN4, pp. 1446-1448.
[n] J. DeWire, H. Edwards, R. Littauer, G. Rouse, and R. Sundelin, “An External Beam from the Cornell 10 GeV Synchrotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 964-966.
[n] M. Steck et al., “Recent Results on Equilibrium Temperatures and Cooling Forces with Electron Cooled Heavy Ion Beams in the ESR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1197-1200.
[n] E. Koukovini-Platia, G. De Michele, G. Rumolo, and C. Zannini, “Electromagnetic Characterization of Materials for the CLIC Damping Rings”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WESCI3, pp. 198-200.
[n] F. Armborst, P. Goslawski, and A. Jankowiak, “Tune and Chromaticity Optimization at Bessy II for the Transverse Resonant Island Bucket Optics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1411-1414. doi:10.18429/JACoW-IPAC2019-TUPGW013
[n] S. Wagner, R. Schmidt, and J. Wenninger, “Reliability Analysis of the LHC Machine Protection System: Terminology and Methodology”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC145, pp. 3327-3329.
[n] H. S. Uhm, “Free Electron Laser for a Mildly Relativistic Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3121-3124.
[n] C. Zannini and G. Rumolo, “EM Simulations in Beam Coupling Impedance Studies: Some Examples of Application”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WESCI1, pp. 190-192.
[n] A. S. Vorozhtsov and S. B. Vorozhtsov, “MAGNETIC FIELD SIMULATION IN THE CUSTOMS CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO08, pp. XX-XX.
[n] G. Mavrogenes, D. Ficht, W. Gallagher, and T. Kohe, “High Charge Picosecond Pulses with a Double Gap Subharmonic Buncher”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2989-2992.
[n] G. Iadarola and G. Rumolo, “Electron Cloud Simulations with PyECLOUD”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WESAI4, pp. 138-142.
[n] S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
[n] G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3587-3590.
[n] S. Wagner, A. Apollonio, R. Schmidt, M. Zerlauth, and A. Vergara-Fernandez, “Architecture for Interlock Systems: Reliability Analysis with Regard to Safety and Availability”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU006, pp. 1058-1061.
[n] R. A. Sacks and R. C. Arnold, “Computation of Intrabeam Charge Exchange Rate”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3178-3181.
[n] Y. Honda et al., “Stimulated Emission of THz Coherent Diffraction Radiation in an Optical Cavity by a Multibunch Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1763-1765. doi:10.18429/JACoW-IPAC2019-TUPRB035
[n] E. M?®tral and G. Rumolo, “Simulation Study on the Beneficial Effect of Linear Coupling for the Transverse Mode Coupling Instability in the CERN Super Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH058, pp. 2916-2918.
[n] H. C. Chen and H. S. Uhm, “The Instability of an Annular Electron Beam Propagating Along a Guided Magnetic Field”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2004-2007.
[n] M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
[n] V. Korchuganov, “The Main Problems and Its Solutions in Modern SR Sources”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 22-26. doi:10.18429/JACoW-RUPAC2018-TUXMH02
[n] G. Stover, J. Halliwell, B. Ludewigt, M. Nyman, and R. Stradtner, “Operational Results of an Improved Regulator and Trigger System for the 'Fast' Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 943-946.
[n] V. Chohan, “Computer Controlled Beam Local Radial Perturbation and Rotation in CERN PS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3334-3337.
[n] C. Ronsivalle et al., “The TOP-IMPLART Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS067, pp. 3580-3582.
[n] T.-J. Kuo et al., “Design of prototype magnets for FETS-FFA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1921-1924. doi:10.18429/JACoW-IPAC2025-WEPB086
For LaTeX
Use Complete Form
For BibTeX
References
- A. Marsili, E. B. Holzer, A. Nordt, and M. Sapinski, “From Data Storage towards Decision Making: LHC Technical Data Integration and Analysis”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN017, pp. 131-133.
- K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 876-878.
- F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2011, this conference.
- J. Kulesza, N. Chen, and A. Deyhim, “Design of Control Instrumentation of two In-Vacuum Undulators IVU25s”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS026, pp. 1236-1238.
- E. Gschwendtner et al., “Performance and Operational Experience of the CNGS Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC046, pp. 4164-4166.
- A. Lokey and S. M. Lidia, “Status of Gas Sheet Monitor for Profile Measurements at FRIB”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP027, pp. 410-412.
- J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
- B. Sakowicz, M. Kaminski, D. R. Makowski, P. Mazur, A. Napieralski, and A. Piotrowski, “Asset Management Application for a LLRF Control System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP040, pp. 880-882.
- K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
- B. Goddard et al., “The Effects of LHC Civil Engineering on the SPS and LEP Machines”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP16H, pp. 412-414.
- W. Fan et al., “Simulation Study of Intrabeam Scattering in Low Emittance Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP090, pp. 1639-1641.
- M. Modena, A. V. Aloev, E. Solodko, P. A. Thonet, and A. S. Vorozhtsov, “Status of CLIC Magnets Studies and R&D”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1350-1353.
- W. Bialowons et al., “Wake Field Acceleration”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH1-3, pp. 398-404.
- G. Arduini, T. Bohl, H. Burkhardt, E. Metral, G. Rumolo, and B. Salvant, “Fast Vertical Single-Bunch Instability at Injection in the CERN SPS - An Update”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN065, pp. 4162-4164.
- M. D. Hildreth et al., “The Straightness Monitor System at ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE100, pp. 1218-1220.
- J. Seeman et al., “Observation of the Beam-Beam Limit in CESR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2033-2036.
- M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
- A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
- J. Alessi, “High Current Polarized Proton Sources”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE4-04, pp. 465-469.
- E. A. Crosbie and P. V. Livdahl, “Matching and Alignment from the Linac to the Zero Gradient Synchrotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 799-804.
- J. Badier et al., “Observation of Transverse Polarization in LEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 147-150.
- P. Evtushenko et al., “Electron Beam Diagnostics of the JLab UV FEL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCN4, pp. 1446-1448.
- J. DeWire, H. Edwards, R. Littauer, G. Rouse, and R. Sundelin, “An External Beam from the Cornell 10 GeV Synchrotron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 964-966.
- M. Steck et al., “Recent Results on Equilibrium Temperatures and Cooling Forces with Electron Cooled Heavy Ion Beams in the ESR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1197-1200.
- E. Koukovini-Platia, G. De Michele, G. Rumolo, and C. Zannini, “Electromagnetic Characterization of Materials for the CLIC Damping Rings”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WESCI3, pp. 198-200.
- F. Armborst, P. Goslawski, and A. Jankowiak, “Tune and Chromaticity Optimization at Bessy II for the Transverse Resonant Island Bucket Optics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1411-1414.
- S. Wagner, R. Schmidt, and J. Wenninger, “Reliability Analysis of the LHC Machine Protection System: Terminology and Methodology”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC145, pp. 3327-3329.
- H. S. Uhm, “Free Electron Laser for a Mildly Relativistic Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3121-3124.
- C. Zannini and G. Rumolo, “EM Simulations in Beam Coupling Impedance Studies: Some Examples of Application”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WESCI1, pp. 190-192.
- A. S. Vorozhtsov and S. B. Vorozhtsov, “MAGNETIC FIELD SIMULATION IN THE CUSTOMS CYCLOTRON”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO08, pp. XX-XX.
- G. Mavrogenes, D. Ficht, W. Gallagher, and T. Kohe, “High Charge Picosecond Pulses with a Double Gap Subharmonic Buncher”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2989-2992.
- G. Iadarola and G. Rumolo, “Electron Cloud Simulations with PyECLOUD”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WESAI4, pp. 138-142.
- S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
- G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3587-3590.
- S. Wagner, A. Apollonio, R. Schmidt, M. Zerlauth, and A. Vergara-Fernandez, “Architecture for Interlock Systems: Reliability Analysis with Regard to Safety and Availability”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU006, pp. 1058-1061.
- R. A. Sacks and R. C. Arnold, “Computation of Intrabeam Charge Exchange Rate”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3178-3181.
- Y. Honda et al., “Stimulated Emission of THz Coherent Diffraction Radiation in an Optical Cavity by a Multibunch Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1763-1765.
- E. M?®tral and G. Rumolo, “Simulation Study on the Beneficial Effect of Linear Coupling for the Transverse Mode Coupling Instability in the CERN Super Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH058, pp. 2916-2918.
- H. C. Chen and H. S. Uhm, “The Instability of an Annular Electron Beam Propagating Along a Guided Magnetic Field”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2004-2007.
- M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
- V. Korchuganov, “The Main Problems and Its Solutions in Modern SR Sources”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 22-26.
- G. Stover, J. Halliwell, B. Ludewigt, M. Nyman, and R. Stradtner, “Operational Results of an Improved Regulator and Trigger System for the 'Fast' Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 943-946.
- V. Chohan, “Computer Controlled Beam Local Radial Perturbation and Rotation in CERN PS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3334-3337.
- C. Ronsivalle et al., “The TOP-IMPLART Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS067, pp. 3580-3582.
- T.-J. Kuo et al., “Design of prototype magnets for FETS-FFA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB086, pp. 1921-1924.
Back to search