Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Fowler and D. Bizzozero, “Developments in LUME-ACE3P including S-parameter optimization for S3P”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 748-751. doi:10.18429/JACoW-NAPAC2025-WEP029
[n] F. Caspers, M. Betz, A. Grudiev, and H. Sapotta, “Design Concepts for RF-DC Conversion in Particle Accelerator Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD090, pp. 3308-3310.
[n] W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
[n] J. Y. Tang et al., “New Rebunchers for HIRFL-CSR”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-25, pp. XX-XX.
[n] V. D. Shiltsev et al., “Channeling and Volume Reflection Based Crystal Collimation of the Tevatron Circulating Beam Halo (T980)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOAMH03, pp. 1243-1245.
[n] V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Beam Loss Predictions for the UA9 Crystal Collimation Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP021, pp. 2829-2831.
[n] X. J. Hu et al., “Stochastic Cooling Simulation of Rare Isotope Beam and its Secondary Beam”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 107-111. doi:10.18429/JACoW-HIAT2018-WEOAA03
[n] Y. K. Chen, J. Chen, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Vibration and Beam Motion Monitoring in TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC145, pp. 1365-1367.
[n] M. Betz, O. R. Jones, T. Lefevre, and M. Wendt, “Upgrade of the LHC Schottky Monitor, Operational Experience and First Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 226-228. doi:10.18429/JACoW-IPAC2016-MOPMB060
[n] R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 981-984. doi:10.18429/JACoW-IPAC2016-MOPOY056
[n] L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
[n] W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
[n] E. Colton et al., “Observations of the PSR Transverse Instability”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1896-1899.
[n] C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C.-Y. Liao, “Operation Status of Bunch-by-bunch Feedback System in the TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO015, pp. 514-516.
[n] G. Mavrogenes, D. Ficht, W. Gallagher, and T. Kohe, “High Charge Picosecond Pulses with a Double Gap Subharmonic Buncher”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2989-2992.
[n] T. H. Luo et al., “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 167-169. doi:10.18429/JACoW-NAPAC2016-MOPOB47
[n] S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1342, unpublished.
[n] V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Simulations of Crystal Collimation for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP022, pp. 2832-2834.
[n] Y. Yang et al., “High Precision Synchronization Development for HiRES, the Ultrafast Electron Diffraction Beamline at LBNL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2262-2264. doi:10.18429/JACoW-IPAC2018-WEPAL040
[n] L. Ratner, A. V. Crewe, R. George, and L. C. Teng, “Experimental Area Beams from the ANL 12.5 BeV Proton Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 877-882.
[n] D. Alesini et al., “The Damped C-band RF Structures for the European ELI-NP Proposal”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI013, pp. 2726-2728.
[n] M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
[n] M. Wendt, M. Betz, O. R. Jones, T. Lefevre, and T. E. Levens, “Improvements to the LHC Schottky Monitors”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 453-456. doi:10.18429/JACoW-IBIC2016-TUPG46
[n] L. Monaco et al., “Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP062, pp. 570-574.
[n] S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 848-852.
[n] M. Othman, D. Bizzozero, L. Ge, and C.-K. Ng, “Application of the nonlinear material solver in the ACE3P electromagnetic code suite”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS096, unpublished.
[n] C. Serrano, M. Betz, L. R. Doolittle, S. Paiagua, and V. K. Vytla, “Hardware-in-the-Loop Testing of Accelerator Firmware”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 660. doi:10.18429/JACoW-ICALEPCS2019-TUAPP01
[n] S. Pioli et al., “Novel FPGA-based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3872-3874. doi:10.18429/JACoW-IPAC2019-THPRB030
[n] D. Alesini et al., “Design and RF Test of Damped C-Band Accelerating Structures for the ELI-NP Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3856-3859. doi:10.18429/JACoW-IPAC2014-THPRI042
[n] S. Pioli et al., “Novel FPGA-Based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1624. doi:10.18429/JACoW-ICALEPCS2019-THCPR01
[n] D. Bizzozero et al., “New ACE3P capabilities and code integration of ACE3P with Geant4 and Lume”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 206-210. doi:10.18429/JACoW-NAPAC2025-MOP069
For LaTeX
Use Complete Form
For BibTeX
References
- L. Fowler and D. Bizzozero, “Developments in LUME-ACE3P including S-parameter optimization for S3P”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 748-751.
- F. Caspers, M. Betz, A. Grudiev, and H. Sapotta, “Design Concepts for RF-DC Conversion in Particle Accelerator Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD090, pp. 3308-3310.
- W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
- J. Y. Tang et al., “New Rebunchers for HIRFL-CSR”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-25, pp. XX-XX.
- V. D. Shiltsev et al., “Channeling and Volume Reflection Based Crystal Collimation of the Tevatron Circulating Beam Halo (T980)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOAMH03, pp. 1243-1245.
- V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Beam Loss Predictions for the UA9 Crystal Collimation Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP021, pp. 2829-2831.
- X. J. Hu et al., “Stochastic Cooling Simulation of Rare Isotope Beam and its Secondary Beam”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 107-111.
- Y. K. Chen, J. Chen, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Vibration and Beam Motion Monitoring in TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC145, pp. 1365-1367.
- M. Betz, O. R. Jones, T. Lefevre, and M. Wendt, “Upgrade of the LHC Schottky Monitor, Operational Experience and First Results”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 226-228.
- R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 981-984.
- L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
- W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
- E. Colton et al., “Observations of the PSR Transverse Instability”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1896-1899.
- C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C.-Y. Liao, “Operation Status of Bunch-by-bunch Feedback System in the TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO015, pp. 514-516.
- G. Mavrogenes, D. Ficht, W. Gallagher, and T. Kohe, “High Charge Picosecond Pulses with a Double Gap Subharmonic Buncher”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2989-2992.
- T. H. Luo et al., “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 167-169.
- S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1342, this conference.
- V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Simulations of Crystal Collimation for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP022, pp. 2832-2834.
- Y. Yang et al., “High Precision Synchronization Development for HiRES, the Ultrafast Electron Diffraction Beamline at LBNL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2262-2264.
- L. Ratner, A. V. Crewe, R. George, and L. C. Teng, “Experimental Area Beams from the ANL 12.5 BeV Proton Synchrotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 877-882.
- D. Alesini et al., “The Damped C-band RF Structures for the European ELI-NP Proposal”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI013, pp. 2726-2728.
- M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
- M. Wendt, M. Betz, O. R. Jones, T. Lefevre, and T. E. Levens, “Improvements to the LHC Schottky Monitors”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 453-456.
- L. Monaco et al., “Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP062, pp. 570-574.
- S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 848-852.
- M. Othman, D. Bizzozero, L. Ge, and C.-K. Ng, “Application of the nonlinear material solver in the ACE3P electromagnetic code suite”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS096, unpublished.
- C. Serrano, M. Betz, L. R. Doolittle, S. Paiagua, and V. K. Vytla, “Hardware-in-the-Loop Testing of Accelerator Firmware”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 660.
- S. Pioli et al., “Novel FPGA-based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3872-3874.
- D. Alesini et al., “Design and RF Test of Damped C-Band Accelerating Structures for the ELI-NP Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3856-3859.
- S. Pioli et al., “Novel FPGA-Based Instrumentation for Personnel Safety Systems in Particle Accelerator Facility”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1624.
- D. Bizzozero et al., “New ACE3P capabilities and code integration of ACE3P with Geant4 and Lume”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 206-210.
Back to search