Favourites
For Word
[n] T. Suwada et al., “Positron-Production Experiment in Tungsten Crystal using 4 and 8-GeV Channeling Electrons at the KEKB Injector Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI026, pp. 509-511.
[n] A. D. Brynes, “Inducing Microbunching in the CLARA FEL Test Facility”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 475-478. doi:10.18429/JACoW-FEL2017-WEP026
[n] S. Redaelli et al., “Collimation of 400 MJ Beams at the LHC: The First Step Towards the HL-LHC Era”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 603-606. doi:10.18429/JACoW-HB2023-THBP49
[n] J. P. MacArthur, Z. Huang, J. Krzywi, and A. A. Lutman, “Coherent Undulator Radiation From a Kicked Electron Beam”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 515-518. doi:10.18429/JACoW-FEL2017-WEP048
[n] S. D. Webb, “Period-Averaged Symplectic Maps for the FEL Hamiltonian”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 563-565. doi:10.18429/JACoW-FEL2017-WEP078
[n] M. Hamberg et al., “Electron Beam Heating with the European XFEL Laser Heater”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 458-459. doi:10.18429/JACoW-FEL2017-WEP018
[n] A. Jakos, R. Modic, and R. Stefanic, “PulseOne, first FLASH-ready LINAC timing/trigger system”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS78, unpublished.
[n] A. Morato, T. Hellert, and B. Veglia, “Developing an Object Detector Using Synthetic Data from CAD Models”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3117-3120. doi:10.18429/JACoW-IPAC2025-THPS073
[n] N. Yu. Kazarinov, J. Franko, G. G. Gulbekyan, I. A. Ivanenko, and I. V. Kalagin, “Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 66-69. doi:10.18429/JACoW-CYCLOTRONS2019-MOP018
[n] B. Khomenko, D. Kudryavtsev, H. Reymond, A. Rijllart, N. Trofimov, and A. Raimondo, “The First Stage of the Post Mortem Analysis Software Used for the Hardware Commissioning of the LHC”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB13, pp. 629-631.
[n] T. Lofnes and V. Ziemann, “Fast Cooling Time Measurements in CELSIUS using a Third Generation Mobile Phone Signal Processing Device”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE116, pp. 1927-1929.
[n] W. Cichalewski et al., “The PIP-II dedicated RFPI system final design”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3064-3067. doi:10.18429/JACoW-IPAC2025-THPS045
[n] S. Li et al., “Characterizing Sub-Femtosecond X-ray Pulses from the Linac Coherent Light Source”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 535-538. doi:10.18429/JACoW-FEL2017-WEP060
For LaTeX
Use Complete Form
For BibTeX
References
- T. Suwada et al., “Positron-Production Experiment in Tungsten Crystal using 4 and 8-GeV Channeling Electrons at the KEKB Injector Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI026, pp. 509-511.
- A. D. Brynes, “Inducing Microbunching in the CLARA FEL Test Facility”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 475-478.
- S. Redaelli et al., “Collimation of 400 MJ Beams at the LHC: The First Step Towards the HL-LHC Era”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP49, pp. 603-606.
- J. P. MacArthur, Z. Huang, J. Krzywi, and A. A. Lutman, “Coherent Undulator Radiation From a Kicked Electron Beam”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 515-518.
- S. D. Webb, “Period-Averaged Symplectic Maps for the FEL Hamiltonian”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 563-565.
- M. Hamberg et al., “Electron Beam Heating with the European XFEL Laser Heater”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 458-459.
- A. Jakos, R. Modic, and R. Stefanic, “PulseOne, first FLASH-ready LINAC timing/trigger system”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS78, unpublished.
- A. Morato, T. Hellert, and B. Veglia, “Developing an Object Detector Using Synthetic Data from CAD Models”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 3117-3120.
- N. Yu. Kazarinov, J. Franko, G. G. Gulbekyan, I. A. Ivanenko, and I. V. Kalagin, “Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 66-69.
- B. Khomenko, D. Kudryavtsev, H. Reymond, A. Rijllart, N. Trofimov, and A. Raimondo, “The First Stage of the Post Mortem Analysis Software Used for the Hardware Commissioning of the LHC”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB13, pp. 629-631.
- T. Lofnes and V. Ziemann, “Fast Cooling Time Measurements in CELSIUS using a Third Generation Mobile Phone Signal Processing Device”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE116, pp. 1927-1929.
- W. Cichalewski et al., “The PIP-II dedicated RFPI system final design”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS045, pp. 3064-3067.
- S. Li et al., “Characterizing Sub-Femtosecond X-ray Pulses from the Linac Coherent Light Source”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 535-538.
Back to search