JaCoW Logo

Reference Search

Favourites


For Word

[n]	A. T. Annaluru et al., “1 + / N + Method: Numerical Simulation Studies and Experimental Measurements on the SPIRAL1 Charge Breeder”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 34-38. doi:10.18429/JACoW-ECRIS2018-MOC5
[n]	B. Carlsten et al., “The Los Alamos Neutron Science Center (LANSCE) accelerator: Current condition and status of modernization efforts”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP083, unpublished. 
[n]	H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3172-3175. 
[n]	B. K. Popovic et al., “Design of Miniature Waveguides and Diamond Window Assembly for RF Extraction and Vacuum Isolation for the CWA”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 156. doi:10.18429/JACoW-MEDSI2020-TUPB06
[n]	L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1372-1379. doi:10.18429/JACoW-ICALEPCS2025-THBR001
[n]	D. McGinnis and J. M. Steimel Jr, “Measurement Techniques Using the Tektronix[registered] 3052 DSP System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2231-2234. 
[n]	A. Miyazaki, “SRF Fundamental/Nb Material”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THTUT01, unpublished. 
[n]	K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 272-275. doi:10.18429/JACoW-NAPAC2025-MOP095
[n]	S. Bettoni et al., “Design of the FCC-ee injector linacs up to 20 GeV beam energy”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 527-530. doi:10.18429/JACoW-IPAC2025-MOPM087
[n]	I. N. Meshkov et al., “HV Electron Cooler for the NICA Collider”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA039, pp. 125-126. 
[n]	J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024. 
[n]	F. F. Ni, Z. X. Li, R. X. Tian, Y. Wei, and J. X. Wu, “FPGA-Based Digital IQ Demodulator Used in the Beam Position Monitors for HIAF BRing”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 429-432. doi:10.18429/JACoW-HB2023-THAFP11
[n]	Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704. 
[n]	A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 182. doi:10.18429/JACoW-MEDSI2020-TUPC02
[n]	G. Huffman, D. Boilard, and D. Stone, “Power Limits for Accelerator Tubes from UHF to Ka Band”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0033, pp. 180-182. 
[n]	D. Z. Xie et al., “Status of the 45 GHz MARS-D ECRIS”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 17-20. doi:10.18429/JACoW-ECRIS2020-MOXZO01
[n]	A. J. Clemens, D. Devereux, and A. Magro, “Integration of Bespoke Daq Software with Tango Controls in the SKAO Software Framework: From Problems to Progress”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1533-1535. doi:10.18429/JACoW-ICALEPCS2023-THPDP079
[n]	M. A. Oothoudt, “Monitoring Production Target Thickness”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3106-3109. 
[n]	J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400. 
[n]	V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83. 
[n]	J. D. Jarvis et al., “Demonstration of Optical Stochastic Cooling in an Electron Storage Ring”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper FRXD1, unpublished. 
[n]	A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1928-1930. doi:10.18429/JACoW-IPAC2017-TUPIK096
[n]	R. Abukeshek et al., “Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 85-88. doi:10.18429/JACoW-IPAC2023-MOPA023
[n]	N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072. 
[n]	S. Morales Vigo et al., “Linearity and Response Time of the LHC Diamond Beam Loss Monitors in the CLEAR Beam Test Facility at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 355-358. doi:10.18429/JACoW-IPAC2022-MOPOPT046
[n]	F. Poirier et al., “Installation, Use and Follow-Up of an Emittance-Meter at the Arronax Cyclotron 70XP”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 877-880. doi:10.18429/JACoW-IPAC2021-MOPAB277
[n]	S. Kwon et al., “Development of the digital low level RF system for the LANSCE proton storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4212-4215. doi:10.18429/JACoW-IPAC2023-THPA107
[n]	X. Shen, L. O. Dallin, R. M. Silzer, T. Summers, and M. S. de Jong, “Status and Upgrade Plan of 250 MeV Linac at CLS”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP001, pp. 380-382. 
[n]	E. F. Parker et al., “High Energy Polarized Deuterons at the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3200-3203. 
[n]	M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1181-1184. 
[n]	W. P. McDowell et al., “Standards and the Design of the Advanced Photon Source Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 116-120. doi:10.18429/JACoW-ICALEPCS1991-S03SRD04
[n]	L. H. Waites, J. R. Alonso, J. M. Conrad, D. Koser, and D. Winklehner, “Tools for the Development and Applications of the IsoDAR Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 550-552. doi:10.18429/JACoW-IPAC2021-MOPAB160
[n]	J. Wieland et al., “Improved measurements of nonlinear integrable optics at IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3230-3232. doi:10.18429/JACoW-IPAC2023-WEPL052
[n]	K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2774-2776. doi:10.18429/JACoW-IPAC2023-WEPA051
[n]	K. Ito, H. Higaki, T. Kurauchi, and H. Okamoto, “Experimental Observation of Low-Order Collective Oscillation Modes in a Strong-Focusing Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3130-3133. doi:10.18429/JACoW-IPAC2019-WEPTS018
[n]	F. Krienen, “Electron Wind in Strong Waveguide Fields”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2912-2915. 
[n]	L. Scibile, C. Martel, and P. Villeton Pachot, “A New Distributed Control System for the Consolidation of the CERN Tertiary Infrastructures”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 390-393. doi:10.18429/JACoW-ICALEPCS2017-TUPHA011
[n]	T. von Witzleben et al., “Beam dynamics for concurrent operation of the LHeC and the HL-LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 151-154. doi:10.18429/JACoW-IPAC2023-MOPA054
[n]	A. Malyzhenkov et al., “Online diagnostics and dosimetry of electron beam irradiation with a minimally invasive screens and beam charge monitors”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB037, unpublished. 
[n]	M. Dubois et al., “MONOBOB II : Latest Results of Monocharged Ion Source for SPIRAL2 Project”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT013, pp. 64-66. 
[n]	P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188. 
[n]	M. H. Donald, T. M. Himel, and S. Zelazny, “Diagnosis of Coupling and Beta Function Errors in the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT162, pp. 2840-2842. 
[n]	V. M. Kotov and R. A. Pose, “Control System for a Heavy-Ion Accelerator Complex K4 - K10”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 47-49. doi:10.18429/JACoW-ICALEPCS1991-S01SRA12
[n]	J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 404-406. doi:10.18429/JACoW-NAPAC2025-TUP025
[n]	M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 288-291. doi:10.18429/JACoW-IPAC2022-MOPOPT023
[n]	B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished. 
[n]	O. Bajeat, C. Barue, M. Dubois, F. Lemagnen, and M. Michel, “A New Resistive High Temperature Oven for Metallic Beams Production”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper MOZZO05, unpublished. 
[n]	E. S. McCrory, V. D. Shiltsev, A. J. Slaughter, and A. Xiao, “Fitting the Luminosity Decay in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP036, pp. 2434-2436. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search