JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

Favourites


For Word

[n]	J. Lee, B. Dhital, H. Huang, Y. Semertzidis, and W. Morse, “The potential high orders of vertical electric field systematic effect due to hyperbolic/elliptical deformed electrode plates in the proton-EDM ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1128-1132. doi:10.18429/JACoW-NAPAC2025-THP084
[n]	F. Lothrop, J. Alonso, R. Miller, and R. Stevenson, “Achievement of Bevalac Rapid Mode Switching”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3119-3122. 
[n]	Y. An, Y. Li, X. Lu, and S. Xu, “BPM offset measurements at rapid cycling synchrotron in China Spallation Neutron Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3151-3154. doi:10.18429/JACoW-IPAC2023-WEPL019
[n]	A. Pastushenko et al., “Tunability Study of the Ultra-Low ?* Optics at ATF2 with New Octupole Setup and Tuning Knobs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 752-755. doi:10.18429/JACoW-IPAC2021-MOPAB231
[n]	C. H. Wang, P. Lu, B. G. Sun, and T. Y. Zhou, “Study on Supports of BPM Displacement Measurement System for HLS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 870-872. doi:10.18429/JACoW-IPAC2021-MOPAB275
[n]	B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished. 
[n]	A. Piwinski, “Computer Simulations of the Beam-Beam Interaction and Measurements with PETRA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2440-2443. 
[n]	Y. An, S. Xu, L. Huang, and S. Wang, “Sextupole optimization at rapid cycling synchrotron in China Spallation Neutron Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 60-62. doi:10.18429/JACoW-IPAC2023-MOPA002
[n]	P.-J. Wen, S.-P. Kao, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Respiratory protective equipment fit tests for researchers at the National Synchrotron Radiation Research Center”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5134-5137. doi:10.18429/JACoW-IPAC2023-THPM116
[n]	S.-P. Kao, Y.-C. Lin, and P.-J. Wen, “Cryogenic oxygen deficiency hazard assessment at the National Synchrotron Radiation Research Center”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4073-4076. doi:10.18429/JACoW-IPAC2023-THPA052
[n]	B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished. 
[n]	Y. Li et al., “Uniformization of the Transverse Beam Profile with Nonlinear Magnet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4413-4416. doi:10.18429/JACoW-IPAC2021-THPAB318
[n]	T. Hasan, E. Wisniewski, G. Chen, J. Power, O. Chubenko, and S. Doran, “Advanced growth and characterization of alkali antimonide photocathodes for bright beam applications”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 939-942. doi:10.18429/JACoW-NAPAC2025-THP004
[n]	M. A. Händler et al., “3D simulations of the CAPRICE ECRIS extraction system”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 131-135. doi:10.18429/JACoW-ECRIS2024-TUP14
[n]	W. Chen, R. Qiu, and R. Yang, “Design considerations of the bunch-by-bunch transverse feedback system for the CSNS RCS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM054, unpublished. 
[n]	E. Frame, E. Wisniewski, J. Power, O. Chubenko, P. Piot, and S. Doran, “Generation of low-emittance bunches with selective collimation at the Argonne Wakefield Accelerator”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 461-464. doi:10.18429/JACoW-NAPAC2025-TUP048
[n]	Y.-C. Lin et al., “Dose rate and accumulated dose around the Taiwan Photon Source in various scenarios”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4077-4080. doi:10.18429/JACoW-IPAC2023-THPA053
[n]	Machine-Control-Group MKR, “Two Years of Experience with the PETRA Control System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2382-2385. 
[n]	G. Chen et al., “Simulations and experimental studies for an X-band short-pulse ultra-high gradient photoinjector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1476-1479. doi:10.18429/JACoW-IPAC2023-TUPA064
[n]	S. Li, “Generation and Characterization of  Attosecond Pulses From X-Ray Free-Electron Laser”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA1, unpublished. 
[n]	L. Tosi, C. Knapic, and D. Zangrando, “The ELETTRA Superconducting Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF039, pp. 390-392. 
[n]	W. B. Ye et al., “XiPAF Synchrotron Slow Extraction Commissioning”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3106-3108. doi:10.18429/JACoW-IPAC2021-WEPAB205
[n]	S. Li, “Attosecond Pulse Diagnostics at the LCLS XLEAP”, presented at the IBIC'21, Pohang, Korea, Sep. 2021, paper WEOA01, unpublished. 
[n]	R. Yang, “Improving the dynamic range of a wire scanner up to 1e+7”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG47, unpublished. 
[n]	M. Fawley, “High Order Calculation of the Multipole Content of Three Dimensional Electrostatic Geometrics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3020-3023. 
[n]	A. C. Araujo Martinez, R. Agustsson, S. Kutsaev, A. Moro, A. Smirnov, and A. Aleksandrov, “Recent beam test results of RadiaBeam’s multi-dimensional bunch shape monitor at SNS facility”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP080, unpublished. 
[n]	A. Pastushenko, A. Faus-Golfe, and R. Tom?ís Garc?¡a, “The Optics Design for the Final Focus System of CLIC 380 GeV”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 748-751. doi:10.18429/JACoW-IPAC2021-MOPAB230
[n]	Y. Yuan, Z. H. Xu, Y. An, and S. Xu, “Experimental measuremnet of quadrupole beam oscillating frequency at CSNS RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1319-1321. doi:10.18429/JACoW-IPAC2023-TUOGA3
[n]	H. Frese, G. Hochweller, W. Krechlok, and R. Schmitz, “FPSS-A Fast Packet Switching System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2377-2380. 
[n]	H. H. Lai, “A Design of a Slot Type Pick-up for Stochastic Cooling of a Coasting Beam”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2483-2486. 
[n]	S. K. Hoeffgen et al., “Past, Present and Future Activities for Radiation Effects Testing at JULIC/COSY”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT030, pp. 88-90. 
[n]	Y. Li et al., “Experiment and Simulation Study on the Capture and Acceleration Process of XiPAF Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4409-4412. doi:10.18429/JACoW-IPAC2021-THPAB317
[n]	D. Garcia, G. Adhikari, P. Musumeci, and T. Vecchione, “Wafer-compatible photocathode plug design for high gradient RF photoinjector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1464-1466. doi:10.18429/JACoW-IPAC2025-TUPS024
[n]	N. Ueda et al., “Design, Construction and Performance of the INS RFQ Linac 'LITL'”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2975-2980. 
[n]	W. Busse, “Invited Paper: The Computer Aided Control System of the VICKSI Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-01, pp. 2300-2305. 
[n]	T. Hasan et al., “Advanced growth and characterization of alkali antimonide photocathodes for bright beam applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS072, unpublished. 
[n]	M. A. Green, “Orbit Studies for the 100 MeV Aladdin Racetrack Microtron Injector”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2428-2431. 
[n]	A. Hilaire and A. Laisne, “On the Use of Quadrupoles in Resonant Ejection in View of the Matching of the Beam Emittance to the Extraction Channel”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1004-1007. 
[n]	K. Jin et al., “HLS RF System Improvement in NSRL Phase II Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT065, pp. 3653-3655. 
[n]	A. Denker et al., “Status of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP20C, pp. 711-712. 
[n]	F. Li et al., “The status of beam instrument at CSNS”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG48, unpublished. 
[n]	R. Kostin et al., “First conduction cooled photoinjector status”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2747-2750. doi:10.18429/JACoW-IPAC2024-WEPS23
[n]	A. O. Sidorin, E. V. Ivanov, and G. V. Trubnikov, “The Quench Detection System for Superconducting Elements of Nuclotron Acceleration Complex”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD024, pp. 605-607. 
[n]	S. Li, “Generation and Characterization of  Attosecond Pulses From X-Ray Free-Electron Laser”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA1, unpublished. 
[n]	S. S. Kurennoy, “Beam Coupling Impedances of Fast Transmission-Line Kickers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI108, pp. 1526-1528. 
[n]	W. Huang et al., “Large Dynamic Range Beam Intensity Measurement of Both H0 and Proton Beams in Injection Upgrade of CSNS-II”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 113-117. doi:10.18429/JACoW-IBIC2025-MOPCO19
[n]	S. Petracca, I. M. Pinto, and F. Ruggiero, “Analytic Computation of Beam Impedances in Complex Heterogenous Accelerator Geometries”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE12, pp. 2187-2189. 
[n]	G. Tiwari et al., “EUV FEL light source based on energy recovery linac with on-orbit laser plasma injection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 408-411. doi:10.18429/JACoW-IPAC2024-MOPG66
[n]	A. Garren, I. Haber, and G. Krafft, “Focusing of Heavy Ion Beams on a Fusion Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2468-2471. 
[n]	L. Zeng et al., “CSNS-II superconducting Section Beam Loss Measurement Electronic Design”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO20, unpublished. 
[n]	X. W. Wu et al., “High-Gradient Performance of X-Band Choke-Mode Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4011-4013. doi:10.18429/JACoW-IPAC2018-THPAL154

For LaTeX

Use Complete Form

For BibTeX

References

Back to search