Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. Shelbaya, R. A. Baartman, and O. K. Kester, “End-to-End RMS Envelope Model of the ISAC-I Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4183-4186. doi:10.18429/JACoW-IPAC2021-THPAB204
[n] P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 666-669. doi:10.18429/JACoW-LINAC2024-THPB016
[n] V. Papadimitriou, R. Andrews, M. R. Campbell, A. Z. Chen, S. C. Childress, and C. D. Moore, “Status of the Design of the LBNE Neutrino Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD039, pp. 451-453.
[n] M. Pugliese et al., “Synchrobots: Experiments with Telepresence and Teleoperated Mobile Robots in a Synchrotron Radiation Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB04, pp. 1052-1057.
[n] J. Steimel et al., “The Six-Cavity Test - Demonstrated Acceleration of Beam with Multiple RF Cavities and a Single Klystron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP062, pp. 3877-3879.
[n] R. Baartman, H. Schoenauer, and T. Suzuki, “Instabilities in the Proposed TRIUMF KAON Factory Synchrotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2395-2398.
[n] M. Pugliese, F. Bill?¿, D. Favretto, N. Guidi, and M. Turcinovich, “Managing by Objectives a Research Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC083, pp. 292-295.
[n] D. Poole and T. Ring, “The Daresbury Personnel Safety System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1931-1934.
[n] A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 392-394. doi:10.18429/JACoW-IPAC2015-MOPJE046
[n] J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
[n] B. D. Muratori, “New Injector for the EMMA ns-FFAG Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD019, pp. 1449-1451.
[n] K. L. F. Bane, “Landau Damping in the SLAC Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2389-2392.
[n] C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190.
[n] D. J. Peake, M. J. Boland, R. T. Dowd, R. P. Rassool, and Y. E. Tan, “Preliminary Operational Experiences of a Bunch-by-bunch Transverse Feedback System at the Australian Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB027, pp. 2743-2745.
[n] J. M. Y. Ruber et al., “The New FREIA Laboratory for Accelerator Development”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3059-3061. doi:10.18429/JACoW-IPAC2014-THPRO077
[n] Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
[n] C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736.
[n] G. Le Meur, “A Mixed Finite Element Method for Particle Simulation in Lasertron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1204-1207.
[n] D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
[n] T. Tanabe, T. Masuoka, J. Ohnishi, M. Takano, and T. Katayama, “Preliminary Design of MUSES Control System Based on RT-CORBA and Java”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT003, pp. XX-XX.
[n] T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 72-74. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO02
[n] F. J. Willeke, “Overcoming Performance Limitations due to Synchrobetatron Resonances in the HERA Electron Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT046, pp. 650-652.
[n] I. P. Parajuli, A. V. Gurevich, G. Ciovati, and J. R. Delayen, “Preliminary Results from Magnetic Field Scanning System for a Single-Cell Niobium Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 96. doi:10.18429/JACoW-SRF2021-SUPFDV015
[n] M. L. Langlois, M. Cornelis, D. Einfeld, and F. Per?®z, “RF Measurements on Variations of the ALBA Dampy Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP008, pp. 821-823.
[n] R. Borghes et al., “A Common Software Framework for FEL Data Acquisition and Experiment Management at FERMI”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB06, pp. 1481-1484.
[n] D. Bernard and A. E. Specka, “On Triple Focusing Dipole Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP093G, pp. 2453-2455.
[n] M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3873-3875. doi:10.18429/JACoW-IPAC2015-THPF081
[n] D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
[n] R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
[n] R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 948-952. doi:10.18429/JACoW-ICALEPCS2017-TUPHA208
[n] R. Borghes et al., “Control and Data Acquisition Systems for the FERMI@Elettra Experimental Stations”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU015, pp. 462-464.
[n] R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
[n] H. S. Suh et al., “Design and Test of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1271-1273. doi:10.18429/JACoW-IPAC2014-TUPRO098
[n] H. Danared, “Design of the ESS Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP071, pp. 3904-3906.
[n] Y. Senichev et al., “Quasi-frozen Spin Method for EDM Deuteron Search”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 213-215. doi:10.18429/JACoW-IPAC2015-MOPWA044
[n] H. J. Kim et al., “Current Status of Superconducting Linac for the Rare Isotope Science Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-LINAC2016-MOOP02
[n] E. H. M. Wildner et al., “Status of the ESSnuSB Accumulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3942-3944. doi:10.18429/JACoW-IPAC2015-THPF100
[n] B. Beaudoin, I. Haber, and R. A. Kishek, “Barrier Shock Compression with Longitudinal Space Charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 646-648. doi:10.18429/JACoW-IPAC2015-MOPMA044
[n] H. Jin, I. S. Hong, and J.-H. Jang, “Recent Beam Dynamics Studies for the SCL Demo of RISP”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 121-123. doi:10.18429/JACoW-ECRIS2016-WEPP34
[n] J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-03, pp. 149-151.
[n] D. Douglas, “Ion Stability in Bunched Electron Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2294-2297.
[n] K. Makino, M. Berz, and E. Valetov, “Computation of Nonlinear Fields and Orbit and Spin Transfer Maps of Electrostatic Elements using Differential Algebras”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 168-171. doi:10.18429/JACoW-ICAP2015-THDBC1
[n] A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX.
[n] V. Leurent et al., “Ultra-short x-ray Radiation coming from a Laser Wakefield Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP134, pp. 2809-2811.
[n] S. Brandenburg et al., “The RF System of the Superconducting Cyclotron AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-01, pp. 197-200.
[n] D. E. Kim et al., “First Results of the PAL-XFEL Prototype Undulator Measurements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME026, pp. 3561-3563.
[n] V. Nuttens et al., “Cyclotron Vacuum Model and H- Gas Stripping Losses”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP075, pp. 200-202.
[n] M. Lonza et al., “Status Report of the FERMI@Elettra Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST02, pp. 589-592.
[n] M. A. Shapiro, J. R. Sirigiri, and R. J. Temkin, “Surface Waves on Interface of 3D Metal-wire Diamond Lattice for Accelerator Applications.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS007, pp. 3008-3010.
[n] T. Tanabe, M. Kase, and T. Masuoka, “XML-Based Integration for VMEs, an Application Server and RDBMS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO008, pp. 2052-2054.
[n] R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816.
[n] M. S. Zisman, “Status of the International Muon Ionization Cooling Experiment (MICE)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN119, pp. 2996-2998.
[n] J.-L. Bol et al., “Operational Experience with the 500 /umA H- Isotope Production Cyclotron Cyclone 30”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1488-1491.
[n] B.-S. Park, B. H. Choi, and I. S. Hong, “Progress on RFQ Fabrication for RISP Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1308-1310. doi:10.18429/JACoW-IPAC2016-TUPMR030
[n] R. J. Smith, P. A. McIntosh, and T. Ring, “The Implementation of a Down conversion Orbit Measurement Technique on the Darebury SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1542-1545.
[n] D. V. Neuffer, R. P. Johnson, and C. Y. Yoshikawa, “Use of Harmonics in RF Cavities in Muon Capture for a Neutrino Factory or Muon Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN106, pp. 2957-2959.
[n] Z. Kormány, “A compact device for measuring and monitoring the energy of accelerated particle beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 752-755. doi:10.18429/JACoW-IBIC2025-WEPMO16
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] C. Bieth and A. Laisne, “A Very Compact Protontherapy Facility Based on an Extensive Use of High Temperature Superconductors (HTS)”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-03, pp. 669-672.
[n] R. E. Laxdal et al., “A 3-gap Booster Cavity to Match Ion Source Potential to RFQ Acceptance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 196-199. doi:10.18429/JACoW-LINAC2018-MOPO092
[n] S. Prabhakar, J. D. Fox, and D. Teytelman, “New Diagnostics and Cures for Coupled-Bunch Instabilities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA002, pp. 300-304.
[n] Yu. I. Maltseva and V. G. Prisekin, “Optical Fiber Based Beam Loss Monitor for the BINP e-e+ Injection Complex”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 486-488. doi:10.18429/JACoW-RUPAC2018-THPSC38
[n] P. Mine, “Accelerator Schemes based on Lasers and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ03A, pp. 103-107.
[n] R. Appleby, P. Bambade, O. Dadoun, and A. Ferrari, “Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS078, pp. 733-735.
[n] F. Amiranoff et al., “Beat-Wave Accelerator Experiments at Ecole Polytechnique”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 631-634.
[n] W. B. Mori et al., “Laser Wakefields at UCLA and LLNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 564-567.
[n] R. Brinkmann, “HERA Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
[n] M. Kase, T. Masuoka, and T. Tanabe, “Preliminary Design of RIBF Control System using CORBA and RTOS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B15, pp. 1871-1873.
[n] R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Photonic Bandgap (PBG) Accelerator Structure Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS006, pp. 3005-3007.
[n] G. Martin, W. A. Morris, and S. Stoneham, “Console Operated Control System for the RIKEN Muon Facility on ISIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP080L, pp. 1803-1805.
[n] C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
[n] H. Hindi, D. Briggs, J. Fox, W. Hosseini, and A. Hutton, “Down Sampled Signal Processing for a B Factory Bunch-by-Bunch Feedback System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1067-1070.
For LaTeX
Use Complete Form
For BibTeX
References
- O. Shelbaya, R. A. Baartman, and O. K. Kester, “End-to-End RMS Envelope Model of the ISAC-I Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4183-4186.
- P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 666-669.
- V. Papadimitriou, R. Andrews, M. R. Campbell, A. Z. Chen, S. C. Childress, and C. D. Moore, “Status of the Design of the LBNE Neutrino Beamline”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD039, pp. 451-453.
- M. Pugliese et al., “Synchrobots: Experiments with Telepresence and Teleoperated Mobile Robots in a Synchrotron Radiation Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB04, pp. 1052-1057.
- J. Steimel et al., “The Six-Cavity Test - Demonstrated Acceleration of Beam with Multiple RF Cavities and a Single Klystron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP062, pp. 3877-3879.
- R. Baartman, H. Schoenauer, and T. Suzuki, “Instabilities in the Proposed TRIUMF KAON Factory Synchrotrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2395-2398.
- M. Pugliese, F. Bill?¿, D. Favretto, N. Guidi, and M. Turcinovich, “Managing by Objectives a Research Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC083, pp. 292-295.
- D. Poole and T. Ring, “The Daresbury Personnel Safety System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1931-1934.
- A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 392-394.
- J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 179-185.
- B. D. Muratori, “New Injector for the EMMA ns-FFAG Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD019, pp. 1449-1451.
- K. L. F. Bane, “Landau Damping in the SLAC Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2389-2392.
- C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190.
- D. J. Peake, M. J. Boland, R. T. Dowd, R. P. Rassool, and Y. E. Tan, “Preliminary Operational Experiences of a Bunch-by-bunch Transverse Feedback System at the Australian Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB027, pp. 2743-2745.
- J. M. Y. Ruber et al., “The New FREIA Laboratory for Accelerator Development”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3059-3061.
- Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
- C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736.
- G. Le Meur, “A Mixed Finite Element Method for Particle Simulation in Lasertron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1204-1207.
- D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
- T. Tanabe, T. Masuoka, J. Ohnishi, M. Takano, and T. Katayama, “Preliminary Design of MUSES Control System Based on RT-CORBA and Java”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAT003, pp. XX-XX.
- T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 72-74.
- F. J. Willeke, “Overcoming Performance Limitations due to Synchrobetatron Resonances in the HERA Electron Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT046, pp. 650-652.
- I. P. Parajuli, A. V. Gurevich, G. Ciovati, and J. R. Delayen, “Preliminary Results from Magnetic Field Scanning System for a Single-Cell Niobium Cavity”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 96.
- M. L. Langlois, M. Cornelis, D. Einfeld, and F. Per?®z, “RF Measurements on Variations of the ALBA Dampy Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP008, pp. 821-823.
- R. Borghes et al., “A Common Software Framework for FEL Data Acquisition and Experiment Management at FERMI”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB06, pp. 1481-1484.
- D. Bernard and A. E. Specka, “On Triple Focusing Dipole Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP093G, pp. 2453-2455.
- M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3873-3875.
- D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
- R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
- R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 948-952.
- R. Borghes et al., “Control and Data Acquisition Systems for the FERMI@Elettra Experimental Stations”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU015, pp. 462-464.
- R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
- H. S. Suh et al., “Design and Test of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1271-1273.
- H. Danared, “Design of the ESS Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP071, pp. 3904-3906.
- Y. Senichev et al., “Quasi-frozen Spin Method for EDM Deuteron Search”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 213-215.
- H. J. Kim et al., “Current Status of Superconducting Linac for the Rare Isotope Science Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 41-43.
- E. H. M. Wildner et al., “Status of the ESSnuSB Accumulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3942-3944.
- B. Beaudoin, I. Haber, and R. A. Kishek, “Barrier Shock Compression with Longitudinal Space Charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 646-648.
- H. Jin, I. S. Hong, and J.-H. Jang, “Recent Beam Dynamics Studies for the SCL Demo of RISP”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 121-123.
- J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-03, pp. 149-151.
- D. Douglas, “Ion Stability in Bunched Electron Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2294-2297.
- K. Makino, M. Berz, and E. Valetov, “Computation of Nonlinear Fields and Orbit and Spin Transfer Maps of Electrostatic Elements using Differential Algebras”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 168-171.
- A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX.
- V. Leurent et al., “Ultra-short x-ray Radiation coming from a Laser Wakefield Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP134, pp. 2809-2811.
- S. Brandenburg et al., “The RF System of the Superconducting Cyclotron AGOR”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-01, pp. 197-200.
- D. E. Kim et al., “First Results of the PAL-XFEL Prototype Undulator Measurements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME026, pp. 3561-3563.
- V. Nuttens et al., “Cyclotron Vacuum Model and H- Gas Stripping Losses”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP075, pp. 200-202.
- M. Lonza et al., “Status Report of the FERMI@Elettra Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUDAUST02, pp. 589-592.
- M. A. Shapiro, J. R. Sirigiri, and R. J. Temkin, “Surface Waves on Interface of 3D Metal-wire Diamond Lattice for Accelerator Applications.”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS007, pp. 3008-3010.
- T. Tanabe, M. Kase, and T. Masuoka, “XML-Based Integration for VMEs, an Application Server and RDBMS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO008, pp. 2052-2054.
- R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816.
- M. S. Zisman, “Status of the International Muon Ionization Cooling Experiment (MICE)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN119, pp. 2996-2998.
- J.-L. Bol et al., “Operational Experience with the 500 /umA H- Isotope Production Cyclotron Cyclone 30”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1488-1491.
- B.-S. Park, B. H. Choi, and I. S. Hong, “Progress on RFQ Fabrication for RISP Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1308-1310.
- R. J. Smith, P. A. McIntosh, and T. Ring, “The Implementation of a Down conversion Orbit Measurement Technique on the Darebury SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1542-1545.
- D. V. Neuffer, R. P. Johnson, and C. Y. Yoshikawa, “Use of Harmonics in RF Cavities in Muon Capture for a Neutrino Factory or Muon Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN106, pp. 2957-2959.
- Z. Kormány, “A compact device for measuring and monitoring the energy of accelerated particle beams”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 752-755.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- C. Bieth and A. Laisne, “A Very Compact Protontherapy Facility Based on an Extensive Use of High Temperature Superconductors (HTS)”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper J-03, pp. 669-672.
- R. E. Laxdal et al., “A 3-gap Booster Cavity to Match Ion Source Potential to RFQ Acceptance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 196-199.
- S. Prabhakar, J. D. Fox, and D. Teytelman, “New Diagnostics and Cures for Coupled-Bunch Instabilities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA002, pp. 300-304.
- Yu. I. Maltseva and V. G. Prisekin, “Optical Fiber Based Beam Loss Monitor for the BINP e-e+ Injection Complex”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 486-488.
- P. Mine, “Accelerator Schemes based on Lasers and Plasmas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ03A, pp. 103-107.
- R. Appleby, P. Bambade, O. Dadoun, and A. Ferrari, “Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS078, pp. 733-735.
- F. Amiranoff et al., “Beat-Wave Accelerator Experiments at Ecole Polytechnique”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 631-634.
- W. B. Mori et al., “Laser Wakefields at UCLA and LLNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 564-567.
- R. Brinkmann, “HERA Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
- M. Kase, T. Masuoka, and T. Tanabe, “Preliminary Design of RIBF Control System using CORBA and RTOS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B15, pp. 1871-1873.
- R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Photonic Bandgap (PBG) Accelerator Structure Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS006, pp. 3005-3007.
- G. Martin, W. A. Morris, and S. Stoneham, “Console Operated Control System for the RIKEN Muon Facility on ISIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP080L, pp. 1803-1805.
- C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
- H. Hindi, D. Briggs, J. Fox, W. Hosseini, and A. Hutton, “Down Sampled Signal Processing for a B Factory Bunch-by-Bunch Feedback System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1067-1070.
Back to search