Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Goddard et al., “A New Lead Ion Injection System for the CERN SPS with 50 ns Rise Time”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI052, pp. 398-400.
[n] R. Takai et al., “Test of Hybrid Fill Mode at the Photon Factory Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA035, pp. 2564-2566.
[n] M. R. F. Siggel-King, C. P. Welsch, O. Karamyshev, G. A. Karamysheva, and A. I. Papash, “Design of a Low Energy Ion Beam Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC065, pp. 2169-2171.
[n] A. Jain et al., “Collider-quality electron bunches from an all-optical plasma photoinjector”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP012, unpublished.
[n] T. Ota et al., “Development of HOM Absorbers for CW Superconducting Cavities in Energy Recovery Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1060-1062. doi:10.18429/JACoW-SRF2019-THP072
[n] J. F. Maclean and N and D. Arnold, “The Advanced Photon Source Injector Test Stand Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP015, pp. XX-XX.
[n] D. Manglunki et al., “Plans for the Upgrade of CERN's Heavy Ion Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA060, pp. 2645-2647.
[n] G. K. Sahoo et al., “Investigation of Radiation Damage of Insertion Devices at PETRA III due to Particle Losses using Tracking Results with SixTrack”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 203-206. doi:10.18429/JACoW-IPAC2015-MOPWA041
[n] R. Garoby, “SPL at CERN”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROBAU04, pp. 930-933.
[n] P. Bosland, “The Superconducting Prototype LINAC for IFMIF”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU05, pp. 902-906.
[n] S. Guiducci et al., “Updated Design of the Italian SuperB Factory Injection System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ024, pp. 3738-3740.
[n] R. Kitahara, Y. Fuwa, and Y. Iwashita, “Magnetic Field Evaluation of Multipole Permanent Magnets by Harmonic Coil with Novel Calibration Technique”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1259-1261. doi:10.18429/JACoW-IPAC2014-TUPRO094
[n] F. Qiu, S. Fukuda, S. Matsumoto, T. Matsumoto, T. Miura, and T. Natsui, “Design Study of a High Efficiency Klystron for SuperKEKB Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 901-904. doi:10.18429/JACoW-LINAC2018-THPO096
[n] R. D. Kephart, “Project X”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU01, pp. 887-887.
[n] H. Hayano, “ATF Linac Commissioning”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper WE101, pp. 547-551.
[n] B. Leung et al., “A W-band corrugated waveguide for high-efficiency high-gradient wakefield acceleration”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 701-705. doi:10.18429/JACoW-NAPAC2025-WEP008
[n] G. H. Hoffstaetter, “A 5 GeV, 100 mA ERL Based on CW SRF”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU03, pp. 895-895.
[n] V. Pirozhenko, A. Korolyov, and K. Simonov, “Frjazino”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI108, pp. 2769-2771.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Goddard et al., “A New Lead Ion Injection System for the CERN SPS with 50 ns Rise Time”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI052, pp. 398-400.
- R. Takai et al., “Test of Hybrid Fill Mode at the Photon Factory Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA035, pp. 2564-2566.
- M. R. F. Siggel-King, C. P. Welsch, O. Karamyshev, G. A. Karamysheva, and A. I. Papash, “Design of a Low Energy Ion Beam Facility”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC065, pp. 2169-2171.
- A. Jain et al., “Collider-quality electron bunches from an all-optical plasma photoinjector”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP012, unpublished.
- T. Ota et al., “Development of HOM Absorbers for CW Superconducting Cavities in Energy Recovery Linac”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1060-1062.
- J. F. Maclean and N and D. Arnold, “The Advanced Photon Source Injector Test Stand Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP015, pp. XX-XX.
- D. Manglunki et al., “Plans for the Upgrade of CERN's Heavy Ion Complex”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA060, pp. 2645-2647.
- G. K. Sahoo et al., “Investigation of Radiation Damage of Insertion Devices at PETRA III due to Particle Losses using Tracking Results with SixTrack”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 203-206.
- R. Garoby, “SPL at CERN”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROBAU04, pp. 930-933.
- P. Bosland, “The Superconducting Prototype LINAC for IFMIF”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU05, pp. 902-906.
- S. Guiducci et al., “Updated Design of the Italian SuperB Factory Injection System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ024, pp. 3738-3740.
- R. Kitahara, Y. Fuwa, and Y. Iwashita, “Magnetic Field Evaluation of Multipole Permanent Magnets by Harmonic Coil with Novel Calibration Technique”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1259-1261.
- F. Qiu, S. Fukuda, S. Matsumoto, T. Matsumoto, T. Miura, and T. Natsui, “Design Study of a High Efficiency Klystron for SuperKEKB Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 901-904.
- R. D. Kephart, “Project X”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU01, pp. 887-887.
- H. Hayano, “ATF Linac Commissioning”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper WE101, pp. 547-551.
- B. Leung et al., “A W-band corrugated waveguide for high-efficiency high-gradient wakefield acceleration”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 701-705.
- G. H. Hoffstaetter, “A 5 GeV, 100 mA ERL Based on CW SRF”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU03, pp. 895-895.
- V. Pirozhenko, A. Korolyov, and K. Simonov, “Frjazino”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI108, pp. 2769-2771.
Back to search