JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Jensen, B. Hanna, and R. Reilly, “A Fast Injection Kicker Magnet for the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH024, pp. 3720-3722. 
[n]	B. Visentin, A. Aspart, J.-P. Charrier, G. Congretel, Y. Gasser, and J. P. Poupeau, “A Non-Electropolished Niobium Cavity Reached 40 MV/m at Saclay”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO013, pp. 2292-2294. 
[n]	S. Stahl and J. A. MacLachlan, “Methods for Detailed Modeling of the Longitudinal Phasespace Dynamics for Beams in Cyclic Accelerators”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 842-845. 
[n]	L. Solomon, J. Galayda, and C. Sylvester, “Magnetic Measurements of the XLS Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2116-2119. 
[n]	X. Guan, “Linac for the Compact Pulsed Hadron Source Project at Tsinghua University Beijing”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS051, pp. 2607-2609. 
[n]	M. Zelazny, T. Gromme, T. Himel, L. Hendrickson, and K. Krauter, “Recording PEP2 Ring Beam Losses at SLAC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_001. 
[n]	J. C. Molendijk et al., “Digital Design of the LHC Low Level RF: the Tuning System for the Superconducting Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH196, pp. 1474-1476. 
[n]	Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507. 
[n]	R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3710-3714. 
[n]	J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596. 
[n]	I. L. Sheynman, A. Kanareykin and I. Ya. Sheynman, “Thermal Balance of Multilayered Tunable Dielectric Loaded Wakefield Accelerating Structure”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA007, pp. 50-52. 
[n]	P. A. Naik, P. D. Gupta, and B. S. Rao, “Advanced Acceleration Schemes”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEXB01, pp. 1945-1949. 
[n]	P. Smith, D. Christiansen, P. Greninger, and G. Spalek, “Automated Design of Coupled RF Cavities Using 2-D and 3-D Codes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH114, pp. 3114-3116. 
[n]	M. R. W. North and A. H. Kershaw, “Real-Time Beam Loss Monitor Display Using FPGA Technology”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP046, pp. 2914-2916. 
[n]	D. P. Brown, “Cyrogenic Systems for Large Superconducting Accelerators/Storage Rings”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3214-3217. 
[n]	A. H. Botha and J. J. Kritzinger, “Design of an RF-System for an Open-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-04, pp. 156-159. 
[n]	K. Kinoshita et al., “Generation and Application of Energetic Heavy Ion and X-ray via 12TW50fs Laser-Solid Interaction”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH027, pp. 2138-2140. 
[n]	S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2326-2329. doi:10.18429/JACoW-IPAC2018-WEPAL065
[n]	L. S. Cowie, B. L. Militsyn, G. Burt, J. A. Mitchell, and M. D. Roper, “VELA Photoinjector Cavity RF Investigations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3968-3970. doi:10.18429/JACoW-IPAC2016-THPOW017
[n]	T. Hosokai et al., “Supersonic Gas Jet Target for Generation of Relativistic Electrons with 12TW-50fs Laser Pulse”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI073, pp. 981-983. 
[n]	M. Kodaira, O. Asai, N. Awaji, M. Haraguchi, and T. Kishimoto, “Performance of SORTEC 1-GeV Synchrotron Radiation Source Facility and Future Plan”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 203-206. 
[n]	R. A. Kostin, P. V. Avrakhov, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Superconducting Traveling Wave Cavity Tuning Studies”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 327-329. doi:10.18429/JACoW-LINAC2016-MOP106021
[n]	P.-E. Bernaudin et al., “Design of the IPHI DTL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH096, pp. 3903-3905. 
[n]	Y. Chu et al., “Data Acquisition and Fault Diagnostic System of Samsung Superconductor Test Facility”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP515, pp. XX-XX. 
[n]	G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n]	X. W. Wu, H. B. Chen, L. Zhang, N. Catalan-Lasheras, B. J. Woolley, and W. Wuensch, “Calorimetric Power Measurements in X-band High Power RF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2967-2969. doi:10.18429/JACoW-IPAC2015-WEPMN019
[n]	R. Paparella et al., “Analysis of the Production, Installation and Commissioning of the European-XFEL Frequency Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 235-239. doi:10.18429/JACoW-SRF2017-MOPB076
[n]	P. M. Stefan, S. Krinsky, G. Rakowsky, and L. Solomon, “Small Gap Undulator Experiment on the NSLS X-Ray Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WXE04, pp. 2435-2437. 
[n]	G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates Inc, “An Interactive Graphical User Interface for the Linac Beam Dynamics Code PARMILA”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-64, pp. 517-519. 
[n]	W. C. Sellyey and R. W. Kruse, “Operational Amplifier Based Stretcher for Stripline Beam Position Moniters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1145-1148. 
[n]	R. Li, “Cancellation Effects in CSR Induced Bunch Transverse Dynamics in Bends”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI031, pp. 1365-1367. 
[n]	H. C. Liu, S. Fu, K. Y. Gong, H. F. Ouyang, and J. Peng, “Design and Experimental Results of an Electro-static Pre-chopper for CSNS LEBT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI025, pp. 3351-3353. 
[n]	N. Baboi et al., “Commissioning of the Electronics for HOM-based Beam Diagnostics at the 3.9 GHz Accelerating Module at FLASH”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF06, pp. 311-314. 
[n]	G. H. Gillespie, “Simulating Apertures in the Uniform Equivalent Beam Model”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-LINAC2016-MOPRC009
[n]	J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743. 
[n]	J. Hinkson and K. Rex, “A Wide Band Slot-Coupled Beam Sensing Electrode for the Advanced Light Source (ALS)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1234-1237. 
[n]	Y. Chu et al., “Design of the gradient dipole magnet for LLICTF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3215-3218. doi:10.18429/JACoW-IPAC2023-WEPL042
[n]	P. Baudrenghien et al., “The LHC Low Level RF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH195, pp. 1471-1473. 
[n]	F. Bouvet et al., “Innovative Design of the Fast Switching Power Supplies for the SOLEIL EMPHU Insertion and its Fast Correctors”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODB03, pp. 982-984. 
[n]	X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2921-2923. doi:10.18429/JACoW-IPAC2015-WEPMN004
[n]	R. A. Kostin et al., “Status of Superconducting Traveling Wave Cavity for High Gradient Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3591-3593. doi:10.18429/JACoW-IPAC2015-WEPWI045
[n]	S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061. 
[n]	M. Y. Huang, D. P. Jin, L. Shen, S. Wang, S. Y. Xu, and P. Zhu, “Timing Adjustment of Eight Kickers and a Method to Calibrate the Kicker Current Curves During the Beam Commissioning for CSNS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 312-314. doi:10.18429/JACoW-HB2018-WEP2PO023
[n]	A. L. Healy, G. Burt, M. J. Cliffe, D. M. Graham, S. P. Jamison, and R. Valizadeh, “Design of a Dielectric-lined Waveguide for Terahertz-driven Linear Electron Acceleration”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 158-160. doi:10.18429/JACoW-LINAC2016-MOPLR011
[n]	J. Zhuang, Y. P. Chu, D. P. Jin, and J. J. Li, “The Performance Test of F3RP61 and Its Applications in CSNS Experimental Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN027, pp. 763-766. 
[n]	P. G. Barnes et al., “A Micro-Channel Plate Based Gas Ionization Profile Monitor with Shaping Field Electrodes for the ISIS H- Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC147, pp. 1371-1373. 
[n]	P. Berkvens, M. Renouf, and T. Ring, “The ESRF Accelerator Facility Personnel Safety System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1637-1639. 
[n]	Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2609-2612. doi:10.18429/JACoW-IPAC2023-WEODB3
[n]	N. Barov, R. H. Miller, and D. J. Newsham, “Construction and Testing of the Dual Slot Resonance Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM14, pp. 1415-1417. 
[n]	S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and V. A. Dolgashev, “High Shunt Impedance Accelerating Structure with Distributed Microwave Coupling”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2531-2533. doi:10.18429/JACoW-IPAC2018-WEPMF069
[n]	M. Sawabe, H. Hayano, A. Komiya, H. Monjushiro, T. Saeki, and M. Satou, “Long-Term Monitoring of 2ndÔÇôPeriod EP-Electrolyte in STF-EP Facility at KEK”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO039, pp. 467-471. 
[n]	J. B. Flanz, “OPERATION OF A CYCLOTRON BASED PROTON THERAPY FACILITY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19B1, pp. XX-XX. 
[n]	R. Carr et al., “Inverse Free Electron Laser Heater for the LCLS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF083, pp. 512-514. 
[n]	K. C. Wilhelmsen et al., “Automatic Alignment Upgrade of Advanced Radiographic Capability for the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC141, pp. 1384-1387. 
[n]	M. Jaussi et al., “A Digital System for Longitudinal Emittance Blow-Up in the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS024, pp. 215-218. 
[n]	E. R. Harms et al., “Third Harmonic System at Fermilab/FLASH”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOBAU01, pp. 11-16. 
[n]	A. S. Smygacheva et al., “The Feedback System for Damping Coherent Betatron and Synchrotron Oscillations of Electron Beam at Dedicated Synchrotron Radiation Source SIBERIA-2.”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC128, pp. 1359-1361. 
[n]	Z. Dong, Y. Du, R. Li, P. Lv, and C. Tan, “Design and commissioning of a 200-kV photocathode electron gun”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4540-4543. doi:10.18429/JACoW-IPAC2023-THPL049
[n]	G. A. Decker and B. C. Craft, “Optimization of Compact Synchrotron Optics for X-Ray Lithography”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 464-467. 
[n]	S. Watson, M. Levi, and J. Nash, “Precision Measurements of the SLC Reference Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1547-1550. 
[n]	Y. Xiao, Y. Liu, and Y. Leng, “Joint analysis of beam loss and beam position during the injection process at Hefei light source”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 215-219. doi:10.18429/JACoW-IBIC2025-MOPMO16
[n]	R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516. 
[n]	L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1644-1646. doi:10.18429/JACoW-IPAC2015-TUPJE014
[n]	L. Zhang, “Solid Pulse Transforming Line for DWA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ004, pp. 2769-2771. 
[n]	D. Poole and T. Ring, “The Daresbury Personnel Safety System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1931-1934. 
[n]	J. R. Harris, D. T. Blackfield, G. J. Caporaso, Y.-J. Chen, M. L. Krogh, and M. Sanders, “Vacuum Insulator Studies for the Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS014, pp. 2358-2360. 
[n]	J. Tuckmantel and P. Baudrenghien, “Adaptive RF Transient Reduction for High Intensity Beams with Gaps”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS006, pp. 541-543. 
[n]	W. Choi, D. Kim, H. Andrews, C.-C. Chang, M. Zuboraj, and E. Simakov, “Demonstration of a sheet electron beam production from a UNCD field emitter array”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 719-722. doi:10.18429/JACoW-NAPAC2025-WEP016
[n]	Y. Luo, Y. Hao, J. Qiang, and Y. Roblin, “Simulation Challenges  for eRHIC Beam-Beam Study”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 99-103. doi:10.18429/JACoW-ICAP2018-SUPAG06
[n]	P. B. Mausbach, E. X. Miqueles, and A. Pinto, “Assonant: A Beamline-Agnostic Event Processing Engine for Data Collection and Standardization”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1025-1032. doi:10.18429/JACoW-ICALEPCS2023-WE3BCO06
[n]	A. M. Batrakov et al., “HIGH MAGNETIC FIELD SUPERCONDUCTING MAGNETS FABRICATED IN BUDKER INP FOR SR GENERATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFI01, pp. XX-XX. 
[n]	C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1301-1303. doi:10.18429/JACoW-IPAC2014-TUPRO108

For LaTeX

Use Complete Form

For BibTeX

References

Back to search