Favourites
For Word
[n] A. Miura, Y. Kawane, J. Tamura, and T. Miyao, “A Beam Position Monitor for the Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 281-284. doi:10.18429/JACoW-IPAC2017-MOPAB071
[n] S. B. van der Geer, O. J. Luiten, and M. J. de Loos, “Pancakes versus Beer-cans in Terms of 6D Phase-space Density”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC036, pp. 151-153.
[n] T. Wangler, “Physics Design of Linear Accelerators for Intense Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU1-02, pp. 211-215.
[n] S. Tomin, G. Geloni, and M. Scholz, “FEL Optimization: From Model-Free to Model-Dependent Approaches and ML Prospects”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 762-765. doi:10.18429/JACoW-FEL2019-THD03
[n] P. Krkotic et al., “Impedance analysis of deformable RF contact bridges for high luminosity LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3470-3473. doi:10.18429/JACoW-IPAC2023-WEPL153
[n] A. Boscolo, M. B. Danailov, M. Ferianis, F. Iazzourene, and L. Sardo, “Stellar Interferometry vs Direct Imaging for Synchrotron Radiation Profile Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B14, pp. 1732-1734.
[n] Y. M. Pischalnikov, B. Hartman, J. P. Holzbauer, W. Schappert, S. J. Smith, and J. C. Yun, “Reliability of the LCLS II SRF Cavity Tuner”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB065, pp. 1267-1271.
[n] A. Puntambekar et al., “Single-cell SC Cavity Development in India”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOA07, pp. 659-662.
[n] A. Mostacci et al., “Characterization of ps-spaced Comb Beams at SPARC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD055, pp. 1527-1529.
[n] U. Iriso, M. Alvarez, A. A. Nosych, and A. Molas, “Streak Camera Calibration Using RF Switches”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 186-189. doi:10.18429/JACoW-IBIC2016-MOPG55
[n] M. Tobiyama et al., “Bunch by Bunch Feedback Systems for J-PARC MR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB036, pp. 2767-2769.
[n] A. Drago, M. M. Beretta, K. J. Bertsche, M. Migliorati, and A. Novokhatski, “Superb Bunch-by-bunch Feedback R&D”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB034, pp. 2761-2763.
[n] F. Willeke et al., “How to Commission, Operate and Maintain a Large Future Accelerator Complex from Far Remote Sites”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB001, pp. 259-263.
[n] Y. Yue and Q. Qin, “Study of Background and MDI Design for CEPC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2028-2030. doi:10.18429/JACoW-IPAC2015-TUPTY016
[n] L. Ouyang, M. Gu, D. M. Li, Q. Yuan, and M. Z. Zhang, “Transverse RF Kicker Excitation and Longitudinal RF Noise Diffusion for Slow Extraction from SAPT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI046, pp. 386-388.
[n] C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1788-1791. doi:10.18429/JACoW-IPAC2019-TUPRB046
[n] C. Betz et al., “The FAIR R3B Prototype Cryogenics Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO007, pp. 46-48.
[n] W. Hartung et al., “Investigation of Plasma Processing for Coaxial Resonators”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 960-967. doi:10.18429/JACoW-SRF2023-THIXA01
[n] Y. Jiang, X. Chang, J. Hirshfield, M. Gai, S. Shchelkunov, and M. Palmer, “Design study of novel deuteron cyclotron auto-resonance accelerator”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 741-744. doi:10.18429/JACoW-NAPAC2025-WEP024
[n] E. Tanke, M. Eshraqi, Y. I. Levinsen, A. Ponton, and S. Valero, “Status of and Plans for the Beam Dynamics Program DYNAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 80-82. doi:10.18429/JACoW-LINAC2016-MOPRC007
[n] F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
[n] M. Sanchez Barrueta, J. T. M. Lyles, and M. D. M. Morris, “Analysis of Resonant Converter Topology for High-Voltage Modulators”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 486-489. doi:10.18429/JACoW-NAPAC2022-TUPA64
[n] H. Matsumoto, S. Kazakov, and K. Saito, “A New Design for the ILC-45MV/m Cavity Input Coupler”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP51, pp. 583-583.
[n] H. Li et al., “First High Power Test of the ESS High Beta Elliptical Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 841-844. doi:10.18429/JACoW-LINAC2018-THPO066
[n] P. Stabile et al., “Beam Position Monitor Electronics Upgrade for Fermilab Switchyard”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF19, pp. 365-368.
[n] C. Dimopoulou, A. Dolinskii, F. Nolden, C. Peschke, and M. Steck, “Stochastic Cooling of Antiprotons in the Collector Ring at FAIR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD005, pp. 376-378.
[n] Y. Kamiya et al., “A Future Project of VUV and Soft X-ray High-Brilliant Light Source in Japan”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 639-642.
[n] M. Z. Hu et al., “PLC Based Vacuum Control and Interlock System of the CYCIAE-230 Superconducting Cyclotron Beam Line”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO008, pp. 70-72. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO008
[n] Z. Huang, “Coherent Spontaneous Emission in High Gain Free-Electron Lasers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP101, pp. 2495-2497.
[n] J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, and X. Liu, “Changes in Electron Cloud Density with Beam Conditioning at CesrTA”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA09, pp. 904-906.
[n] Y. Zhang et al., “SRF Cavity Transient Beam Loading Detection - Simulation and Measurement”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS080, pp. 2517-2519.
[n] W. Drabik, A. Jerzykiewicz, K. Kociecka, and J. Witkowski, “Design Study on Ecological Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2650-2653.
[n] C. A. Cooper, B. Bullock, S. C. Joshi, A. D. Palczewski, and K. Saito, “Centrifugal Barrel Polishing (CBP) of SRF Cavities Worldwide”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper WEIOA02, pp. 571-575.
[n] J. Lyles et al., “High power 805 MHz solid state amplifiers using GaN on SiC HEMT for LANSCE CCL”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 755-759. doi:10.18429/JACoW-NAPAC2025-WEP032
For LaTeX
Use Complete Form
For BibTeX
References
- A. Miura, Y. Kawane, J. Tamura, and T. Miyao, “A Beam Position Monitor for the Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 281-284.
- S. B. van der Geer, O. J. Luiten, and M. J. de Loos, “Pancakes versus Beer-cans in Terms of 6D Phase-space Density”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC036, pp. 151-153.
- T. Wangler, “Physics Design of Linear Accelerators for Intense Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU1-02, pp. 211-215.
- S. Tomin, G. Geloni, and M. Scholz, “FEL Optimization: From Model-Free to Model-Dependent Approaches and ML Prospects”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 762-765.
- P. Krkotic et al., “Impedance analysis of deformable RF contact bridges for high luminosity LHC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL153, pp. 3470-3473.
- A. Boscolo, M. B. Danailov, M. Ferianis, F. Iazzourene, and L. Sardo, “Stellar Interferometry vs Direct Imaging for Synchrotron Radiation Profile Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B14, pp. 1732-1734.
- Y. M. Pischalnikov, B. Hartman, J. P. Holzbauer, W. Schappert, S. J. Smith, and J. C. Yun, “Reliability of the LCLS II SRF Cavity Tuner”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB065, pp. 1267-1271.
- A. Puntambekar et al., “Single-cell SC Cavity Development in India”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOA07, pp. 659-662.
- A. Mostacci et al., “Characterization of ps-spaced Comb Beams at SPARC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD055, pp. 1527-1529.
- U. Iriso, M. Alvarez, A. A. Nosych, and A. Molas, “Streak Camera Calibration Using RF Switches”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 186-189.
- M. Tobiyama et al., “Bunch by Bunch Feedback Systems for J-PARC MR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB036, pp. 2767-2769.
- A. Drago, M. M. Beretta, K. J. Bertsche, M. Migliorati, and A. Novokhatski, “Superb Bunch-by-bunch Feedback R&D”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB034, pp. 2761-2763.
- F. Willeke et al., “How to Commission, Operate and Maintain a Large Future Accelerator Complex from Far Remote Sites”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB001, pp. 259-263.
- Y. Yue and Q. Qin, “Study of Background and MDI Design for CEPC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2028-2030.
- L. Ouyang, M. Gu, D. M. Li, Q. Yuan, and M. Z. Zhang, “Transverse RF Kicker Excitation and Longitudinal RF Noise Diffusion for Slow Extraction from SAPT”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI046, pp. 386-388.
- C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1788-1791.
- C. Betz et al., “The FAIR R3B Prototype Cryogenics Control System”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO007, pp. 46-48.
- W. Hartung et al., “Investigation of Plasma Processing for Coaxial Resonators”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIXA01, pp. 960-967.
- Y. Jiang, X. Chang, J. Hirshfield, M. Gai, S. Shchelkunov, and M. Palmer, “Design study of novel deuteron cyclotron auto-resonance accelerator”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 741-744.
- E. Tanke, M. Eshraqi, Y. I. Levinsen, A. Ponton, and S. Valero, “Status of and Plans for the Beam Dynamics Program DYNAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 80-82.
- F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
- M. Sanchez Barrueta, J. T. M. Lyles, and M. D. M. Morris, “Analysis of Resonant Converter Topology for High-Voltage Modulators”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 486-489.
- H. Matsumoto, S. Kazakov, and K. Saito, “A New Design for the ILC-45MV/m Cavity Input Coupler”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP51, pp. 583-583.
- H. Li et al., “First High Power Test of the ESS High Beta Elliptical Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 841-844.
- P. Stabile et al., “Beam Position Monitor Electronics Upgrade for Fermilab Switchyard”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF19, pp. 365-368.
- C. Dimopoulou, A. Dolinskii, F. Nolden, C. Peschke, and M. Steck, “Stochastic Cooling of Antiprotons in the Collector Ring at FAIR”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD005, pp. 376-378.
- Y. Kamiya et al., “A Future Project of VUV and Soft X-ray High-Brilliant Light Source in Japan”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 639-642.
- M. Z. Hu et al., “PLC Based Vacuum Control and Interlock System of the CYCIAE-230 Superconducting Cyclotron Beam Line”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO008, pp. 70-72.
- Z. Huang, “Coherent Spontaneous Emission in High Gain Free-Electron Lasers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP101, pp. 2495-2497.
- J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, and X. Liu, “Changes in Electron Cloud Density with Beam Conditioning at CesrTA”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA09, pp. 904-906.
- Y. Zhang et al., “SRF Cavity Transient Beam Loading Detection - Simulation and Measurement”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS080, pp. 2517-2519.
- W. Drabik, A. Jerzykiewicz, K. Kociecka, and J. Witkowski, “Design Study on Ecological Accelerator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2650-2653.
- C. A. Cooper, B. Bullock, S. C. Joshi, A. D. Palczewski, and K. Saito, “Centrifugal Barrel Polishing (CBP) of SRF Cavities Worldwide”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper WEIOA02, pp. 571-575.
- J. Lyles et al., “High power 805 MHz solid state amplifiers using GaN on SiC HEMT for LANSCE CCL”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 755-759.
Back to search