Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. B. Colson and B. W. Williams, “Free Electron Lasers in 2004”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS58, pp. XX-XX.
[n] R. Erickson, C. W. Allen, T. K. Inman, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1992-1995”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA24, pp. 1111-1113.
[n] N. C. Bhattacharya and A. S. Divatia, “Orbit Dynamics for AVF Cyclotrons in Hard-Edge Approximation”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-15, pp. 427-429.
[n] N. Kamikubota, “Experience of Prototype Control System for the J-PARC Proton Linac”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAT065, unpublished.
[n] T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
[n] A. Bazzani, M. Comunian, and A. Pisent, “Frequency Map Analysis for Beam Halo Formation in High Intensity Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP123, pp. 1773-1775.
[n] R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
[n] T. Koseki, “Upgrade Plan of J-PARC MR - Toward 1.3 MW Beam Power”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 966-969. doi:10.18429/JACoW-IPAC2018-TUPAK005
[n] M. G. Mazarakis et al., “The Light-Ion Pulsed Power Induction Accelerator for the Laboratory Microfusion Facility (LMF)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 667-670.
[n] J. M. Nogiec, S. Kotelnikov, A. Makulski, K. Trombly-Freytag, and D. G. C. Walbridge, “Superconducting Coil Winding Machine Control System”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 127-129. doi:10.18429/JACoW-NAPAC2016-MOPOB27
[n] F. Marhauser, E. Weihreter, and C. C. Yang, “Impedance Measurements of a HOM-Damped Low Power Prototype Cavity for 3rd Generation SR Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE084, pp. 2172-2174.
[n] M. Vretenar et al., “Conceptual design of a compact synchrotron-based facility for cancer therapy and biomedical research with helium and proton beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5024-5027. doi:10.18429/JACoW-IPAC2023-THPM058
[n] M. A. K. Othman et al., “High-Gradient Tests of W-Band Accelerating Structures”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THYBB4, unpublished.
[n] S. P. Antipov, S. V. Kuzikov, S. Stoupin, and A. A. Vikharev, “Detection of X-Rays and Charged Particles via Detuning of the Microwave Resonator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1958-1960. doi:10.18429/JACoW-IPAC2018-WEPAF058
[n] M. Otani, K. Futatsukawa, K. Hirano, A. Miura, Y. Liu, and T. Maruta, “Longitudinal Bunch Size Measurements with an RF Deflector at J-PARC LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 974-976. doi:10.18429/JACoW-IPAC2018-TUPAK008
[n] R. L. Armstead, J. Blau, and W. B. Colson, “Short Rayleigh Length Free Electron Laser Simulations in Expanding Coordinates”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS65, pp. XX-XX.
[n] K. Yanagida et al., “Development of Beam Diagnostics for SPring-8 Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-22, pp. 665-667.
[n] K. Zhou, X. Y. Lu, X. Luo, S. W. Quan, Z. Q. Yang, and J. Zhao, “Steady State Multipacting in a Micro-pulse Electron Gun”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP053, pp. 851-854.
[n] P. Forck et al., “IFAST-REX: An initiative for the mitigation of beam current fluctuations in slow extraction”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM096, unpublished.
[n] M. Kumada et al., “3 Tesla Magnet-in-Magnet”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE046, pp. 2358-2360.
[n] A. Mizuno, H. Dewa, H. Hanaki, T. Taniuchi, H. Tomizawa, and E. Hotta, “Beam Dynamics Calculations for the SPring-8 Photoinjector System using Multiple Beam Envelope Equations”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD52, pp. 157-160.
[n] G. Tool and C. Rostamzadeh, “Collider Bypass Diode Thermal Simulations and Measurements for the SSCL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1405-1408.
[n] V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1487-1491. doi:10.18429/JACoW-ICALEPCS2025-THMG008
[n] J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
[n] R. H. Carcagno et al., “Control System Design for Automatic Cavity Tuning Machines”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP056, pp. 953-955.
For LaTeX
Use Complete Form
For BibTeX
References
- W. B. Colson and B. W. Williams, “Free Electron Lasers in 2004”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS58, pp. XX-XX.
- R. Erickson, C. W. Allen, T. K. Inman, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1992-1995”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA24, pp. 1111-1113.
- N. C. Bhattacharya and A. S. Divatia, “Orbit Dynamics for AVF Cyclotrons in Hard-Edge Approximation”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-15, pp. 427-429.
- N. Kamikubota, “Experience of Prototype Control System for the J-PARC Proton Linac”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT065, unpublished.
- T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
- A. Bazzani, M. Comunian, and A. Pisent, “Frequency Map Analysis for Beam Halo Formation in High Intensity Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP123, pp. 1773-1775.
- R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
- T. Koseki, “Upgrade Plan of J-PARC MR - Toward 1.3 MW Beam Power”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 966-969.
- M. G. Mazarakis et al., “The Light-Ion Pulsed Power Induction Accelerator for the Laboratory Microfusion Facility (LMF)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 667-670.
- J. M. Nogiec, S. Kotelnikov, A. Makulski, K. Trombly-Freytag, and D. G. C. Walbridge, “Superconducting Coil Winding Machine Control System”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 127-129.
- F. Marhauser, E. Weihreter, and C. C. Yang, “Impedance Measurements of a HOM-Damped Low Power Prototype Cavity for 3rd Generation SR Sources”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE084, pp. 2172-2174.
- M. Vretenar et al., “Conceptual design of a compact synchrotron-based facility for cancer therapy and biomedical research with helium and proton beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM058, pp. 5024-5027.
- M. A. K. Othman et al., “High-Gradient Tests of W-Band Accelerating Structures”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THYBB4, unpublished.
- S. P. Antipov, S. V. Kuzikov, S. Stoupin, and A. A. Vikharev, “Detection of X-Rays and Charged Particles via Detuning of the Microwave Resonator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1958-1960.
- M. Otani, K. Futatsukawa, K. Hirano, A. Miura, Y. Liu, and T. Maruta, “Longitudinal Bunch Size Measurements with an RF Deflector at J-PARC LINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 974-976.
- R. L. Armstead, J. Blau, and W. B. Colson, “Short Rayleigh Length Free Electron Laser Simulations in Expanding Coordinates”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS65, pp. XX-XX.
- K. Yanagida et al., “Development of Beam Diagnostics for SPring-8 Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-22, pp. 665-667.
- K. Zhou, X. Y. Lu, X. Luo, S. W. Quan, Z. Q. Yang, and J. Zhao, “Steady State Multipacting in a Micro-pulse Electron Gun”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP053, pp. 851-854.
- P. Forck et al., “IFAST-REX: An initiative for the mitigation of beam current fluctuations in slow extraction”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM096, unpublished.
- M. Kumada et al., “3 Tesla Magnet-in-Magnet”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE046, pp. 2358-2360.
- A. Mizuno, H. Dewa, H. Hanaki, T. Taniuchi, H. Tomizawa, and E. Hotta, “Beam Dynamics Calculations for the SPring-8 Photoinjector System using Multiple Beam Envelope Equations”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD52, pp. 157-160.
- G. Tool and C. Rostamzadeh, “Collider Bypass Diode Thermal Simulations and Measurements for the SSCL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1405-1408.
- V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1487-1491.
- J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
- R. H. Carcagno et al., “Control System Design for Automatic Cavity Tuning Machines”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP056, pp. 953-955.
Back to search