Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Alessi, E. Beebe, A. Hershcovitch, A. Kponou, and K. Prelec, “Progress in the BNL Program for a RHIC EBIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP004L, pp. 1463-1465.
[n] A. Arnold et al., “Operational Experience From 8 Years of ELBE SRF-Gun II”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIBA06, unpublished.
[n] Ch. Schneider, D. Bemmerer, P. Michel, and D. Stach, “Radiation Tests of Aerospace Components at ELBE”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4641-4643. doi:10.18429/JACoW-IPAC2017-THPVA081
[n] F. Frei and R. Ischebeck, “Electron Bunch Compression Monitors for Short Bunches - Commissioning Results from SwissFEL”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 578-581. doi:10.18429/JACoW-IBIC2019-WEPP026
[n] V. V. Paramonov and A. K. Skasyrskaya, “The Technique for the Numerical Tolerances Estimations in the Construction of Compensated Accelerating Structures”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP90, pp. 812-814.
[n] V. Parma and H. Prin, “Short Straight Sections in the LHC Matching Sections (MS SSS): An Extension of the Arc Cryostats To Fulfill Specific Machine Functionalities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE021, pp. 1724-1726.
[n] X. Zhu, C. Feng, Y. Kang, C. Li, and Z. Zhao, “Recent progress in intense vortex radiation sources at SXFEL”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2640, unpublished.
[n] M. Kinsho, J. Kusano, F. Masukawa, N. Ogiwara, O. Takeda, and K. Yamamoto, “Gamma-Ray Irradiation Experiments of Collimator Key Components for the 3GeV-RCS of J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE012, pp. 1309-1311.
[n] V. V. Paramonov et al., “Design Parameters of the Normal Conducting Booster Cavity for the PITZ-2 Test Stand”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP77, pp. 204-206.
[n] O. Manzhura et al., “Terahertz Sampling Rates with Photonic Time-Stretch for Electron Beam Diagnostics”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 263-266. doi:10.18429/JACoW-IPAC2022-MOPOPT017
[n] K. Yamamoto and M. Kinsho, “Development of the Collimator System for the 3GEV Rapid Cycling Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE013, pp. 1365-1367.
[n] A. Lasheen, H. Damerau, I. Karpov, G. Papotti, and E. T. Vinten, “Longitudinal Collective Effects at Beam Transfer from PS to SPS at CERN”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 587-590. doi:10.18429/JACoW-HB2023-THBP45
[n] T. Rueckelt, M. Alhumaidi, and A. M. Zoubir, “Realization of Transverse Feedback System for SIS18/100 using FPGA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC29, pp. 128-131.
[n] W. Yang, J. Shi, L. Ma, X. Zhu, and P. Li, “The development of superconducting magnets for a compact heavy ion therapy facility”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEP02, unpublished.
[n] C. Lechner et al., “Suppression of FEL Lasing by a Seeded Microbunching Instability”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 289-292. doi:10.18429/JACoW-FEL2015-TUA02
[n] V. V. Paramonov, F. Stephan, A. K. Skasyrskaya, and K. Floettmann, “Pulsed RF Heating Particularities in Normal-Conducting L-band Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP033, pp. 646-648.
[n] N. Marks, S. A. Griffiths, and J. E. Theed, “Configuration of the Dipole Magnet Power Supplies for the DIAMOND Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE117, pp. 2499-2501.
[n] S. A. Griffiths, G. Charnley, N. Marks, and J. E. Theed, “A Power Converter Overview for the Diamond Storage Ring Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE118, pp. 2472-2474.
[n] A. Presland, B. Goddard, J. M. Jimenez, D. R. Ramos, and R. Veness, “A Large Diameter Entrance Window for the LHC Beam Dump Line”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE020, pp. 1698-1700.
[n] E. Beebe, A. Hershcovitch, A. Kponou, K. Prelec, J. Alessi, and R. Schmieder, “Report on EBIS Studies for a RHIC Preinjector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC09, pp. 1013-1015.
[n] O. Engels et al., “Operation of the VE-RFQ Injector for the ISL-Cyclotron”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4011, pp. 789-790.
[n] M. Alhumaidi and A. M. Zoubir, “A Robust Transverse Feedback System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP060, pp. 2843-2845.
[n] M. Brugger et al., “Calculation of Residual Dose Rates and Intervention Scenarios for the LHC Beam Cleaning Insertions--Constraints and Optimization”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP005, pp. 940-942.
[n] J. Alessi et al., “Design and Initial Results of a High Current EBIS Test Stand”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP36C, pp. 1421-1423.
[n] B. A. Gudkov et al., “Stabilization of Magnetron Frequency for a Microtron-Driven FEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 107-109. doi:10.18429/JACoW-FEL2015-MOP038
[n] S. V. Miginsky et al., “Status of the Novosibirsk High Power Terahertz FEL”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA04, pp. 616-618.
[n] B. Marchetti et al., “Status Update of the SINBAD-ARES Linac Under Construction at DESY”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1412-1414. doi:10.18429/JACoW-IPAC2017-TUPAB040
[n] M. Ikegami and T. Ohkawa, “Conceptual Design of a Longitudinal Halo Collimator for J-PARC Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE014, pp. 1413-1415.
[n] J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
[n] H. W. Kim et al., “Comparison of Astra Simulations With Beam Parameter Measurements at the Kaeri Ultrashort Pulse Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 74-76. doi:10.18429/JACoW-FEL2015-MOP018
[n] I. Drebot et al., “Modelling of the HB2TF injector in COMSOL with benchmarking using Astra and RF-track”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5081, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Alessi, E. Beebe, A. Hershcovitch, A. Kponou, and K. Prelec, “Progress in the BNL Program for a RHIC EBIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP004L, pp. 1463-1465.
- A. Arnold et al., “Operational Experience From 8 Years of ELBE SRF-Gun II”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIBA06, unpublished.
- Ch. Schneider, D. Bemmerer, P. Michel, and D. Stach, “Radiation Tests of Aerospace Components at ELBE”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4641-4643.
- F. Frei and R. Ischebeck, “Electron Bunch Compression Monitors for Short Bunches - Commissioning Results from SwissFEL”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 578-581.
- V. V. Paramonov and A. K. Skasyrskaya, “The Technique for the Numerical Tolerances Estimations in the Construction of Compensated Accelerating Structures”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP90, pp. 812-814.
- V. Parma and H. Prin, “Short Straight Sections in the LHC Matching Sections (MS SSS): An Extension of the Arc Cryostats To Fulfill Specific Machine Functionalities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE021, pp. 1724-1726.
- X. Zhu, C. Feng, Y. Kang, C. Li, and Z. Zhao, “Recent progress in intense vortex radiation sources at SXFEL”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2640, this conference.
- M. Kinsho, J. Kusano, F. Masukawa, N. Ogiwara, O. Takeda, and K. Yamamoto, “Gamma-Ray Irradiation Experiments of Collimator Key Components for the 3GeV-RCS of J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE012, pp. 1309-1311.
- V. V. Paramonov et al., “Design Parameters of the Normal Conducting Booster Cavity for the PITZ-2 Test Stand”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP77, pp. 204-206.
- O. Manzhura et al., “Terahertz Sampling Rates with Photonic Time-Stretch for Electron Beam Diagnostics”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 263-266.
- K. Yamamoto and M. Kinsho, “Development of the Collimator System for the 3GEV Rapid Cycling Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE013, pp. 1365-1367.
- A. Lasheen, H. Damerau, I. Karpov, G. Papotti, and E. T. Vinten, “Longitudinal Collective Effects at Beam Transfer from PS to SPS at CERN”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP45, pp. 587-590.
- T. Rueckelt, M. Alhumaidi, and A. M. Zoubir, “Realization of Transverse Feedback System for SIS18/100 using FPGA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC29, pp. 128-131.
- W. Yang, J. Shi, L. Ma, X. Zhu, and P. Li, “The development of superconducting magnets for a compact heavy ion therapy facility”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEP02, unpublished.
- C. Lechner et al., “Suppression of FEL Lasing by a Seeded Microbunching Instability”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 289-292.
- V. V. Paramonov, F. Stephan, A. K. Skasyrskaya, and K. Floettmann, “Pulsed RF Heating Particularities in Normal-Conducting L-band Cavities”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP033, pp. 646-648.
- N. Marks, S. A. Griffiths, and J. E. Theed, “Configuration of the Dipole Magnet Power Supplies for the DIAMOND Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE117, pp. 2499-2501.
- S. A. Griffiths, G. Charnley, N. Marks, and J. E. Theed, “A Power Converter Overview for the Diamond Storage Ring Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE118, pp. 2472-2474.
- A. Presland, B. Goddard, J. M. Jimenez, D. R. Ramos, and R. Veness, “A Large Diameter Entrance Window for the LHC Beam Dump Line”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE020, pp. 1698-1700.
- E. Beebe, A. Hershcovitch, A. Kponou, K. Prelec, J. Alessi, and R. Schmieder, “Report on EBIS Studies for a RHIC Preinjector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC09, pp. 1013-1015.
- O. Engels et al., “Operation of the VE-RFQ Injector for the ISL-Cyclotron”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4011, pp. 789-790.
- M. Alhumaidi and A. M. Zoubir, “A Robust Transverse Feedback System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP060, pp. 2843-2845.
- M. Brugger et al., “Calculation of Residual Dose Rates and Intervention Scenarios for the LHC Beam Cleaning Insertions--Constraints and Optimization”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP005, pp. 940-942.
- J. Alessi et al., “Design and Initial Results of a High Current EBIS Test Stand”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP36C, pp. 1421-1423.
- B. A. Gudkov et al., “Stabilization of Magnetron Frequency for a Microtron-Driven FEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 107-109.
- S. V. Miginsky et al., “Status of the Novosibirsk High Power Terahertz FEL”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC3MA04, pp. 616-618.
- B. Marchetti et al., “Status Update of the SINBAD-ARES Linac Under Construction at DESY”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1412-1414.
- M. Ikegami and T. Ohkawa, “Conceptual Design of a Longitudinal Halo Collimator for J-PARC Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE014, pp. 1413-1415.
- J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
- H. W. Kim et al., “Comparison of Astra Simulations With Beam Parameter Measurements at the Kaeri Ultrashort Pulse Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 74-76.
- I. Drebot et al., “Modelling of the HB2TF injector in COMSOL with benchmarking using Astra and RF-track”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5081, this conference.
Back to search