Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
[n] V. C. Kempson, “Diamond: Ten Years of Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2797-2799. doi:10.18429/JACoW-IPAC2017-WEPAB094
[n] F. M. Russell, “A Strong-Focusing Cyclotron with Separated Orbits”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H03, pp. XX-XX.
[n] M. A. Mizintseva and D. A. Ovsyannikov, “On the Minimax Problem of Beam Dynamics Optimization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 361-363. doi:10.18429/JACoW-RUPAC2016-WEPSB005
[n] H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
[n] F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023.
[n] R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
[n] R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 412-414. doi:10.18429/JACoW-IPAC2018-MOPML010
[n] G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
[n] J. K. Hawkins, R. B. Howard, and H. V. Nguyen, “Automated Real-Time Testing For Embedded Control Systems”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP037, pp. XX-XX.
[n] P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1151-1154.
[n] J. C. Dooling, M. K. Lien, and F. R. Brumwell, “A Real-Time Energy Monitor System for the IPNS LINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC18, pp. 193-195.
[n] C. E. Reece, “An Experimental Analysis of Effective EP Parameters for Low-Frequency Cylindrical Nb Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 472-476. doi:10.18429/JACoW-SRF2019-TUP029
[n] G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP35, unpublished.
[n] C. M. Bhat, B. Hendricks, and J. J. Nelson, “Online Measurement of the Energy Spread of Multi-Turn Beam in the Fermilab Booster at Injection”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 237-241. doi:10.18429/JACoW-HB2016-MOPL020
[n] L. Felsberger, U. Dorda, J. Uythoven, A. Apollonio, J. van de Walle, and D. Vandeplassche, “Quantitative availability modelling for the MYRRHA accelerator driven system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5114-5117. doi:10.18429/JACoW-IPAC2023-THPM105
[n] M. Votava, B. Chase, and M. Wendt, “Controls, LLRF, and Instrumentation Systems for ILC Test Facilities at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS022, pp. 479-481.
[n] Y. Sato et al., “Control System for J-PARC Hadron Experimental Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP108, pp. 331-333.
[n] M. Gonzalez-Berges et al., “Beam Instrumentation Simulation in Python”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1454-1459. doi:10.18429/JACoW-ICALEPCS2023-THPDP060
[n] H. Jiang, L. Lai, Q. Yan, Z. Tang, Z. Xu, and S. Wang, “Development of analog front-end module for the BPM signal processor at SSRF”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 690-693. doi:10.18429/JACoW-IBIC2025-WEPCO29
[n] J.-F. Ostiguy, C. M. Bhat, and V. A. Lebedev, “Modeling Longitudinal Dynamics in the Fermilab Booster Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 873-876. doi:10.18429/JACoW-IPAC2016-MOPOY013
[n] T. A. Miller, D. M. Gassner, V. Litvinenko, M. G. Minty, I. Pinayev, and B. Sheehy, “Infrared Diagnostics Instrumentation Design for the Coherent Electron Cooling Proof of Principle Experiment”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP074, pp. 905-908.
[n] M. Ferrario et al., “Status of the SPARC Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF042, pp. 399-401.
[n] J. E. Griffin, “Compensation for Beam Loading in the 400-GeV Fermilab Main Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1910-1914.
[n] J. Tan, B. Bonin, and H. Safa, “Field Emission and High Voltage Cleaning of Particulate Contaminants on Extended Metallic Surfaces”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C01, pp. 365-368.
[n] U. Pudasaini, G. V. Eremeev, M. J. Kelley, and C. E. Reece, “Recent Developments of Nb?Sn at Jefferson Lab for SRF Accelerator Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 713-716. doi:10.18429/JACoW-NAPAC2019-WEPLM52
[n] J. D. Gilpatrick et al., “Proposed Beam Diagnostics Instrumentation for the LANSCE Refurbishment Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS051, pp. 4099-4101.
[n] H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
[n] N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2069-2071.
[n] R. Die-Cas, H. Leboutet, and J. Pottier, “Performance Evaluation of a Heavy Ion RF Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3520-3523.
[n] I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1948-1951.
[n] J. E. Griffin, “The Effect of Large Delays on Beam RF Phase Lock Loops”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3944-3947.
[n] Y. Joo, P. Buaphad, Y. Kim, H. R. Lee, J. Y. Lee, and S. Lee, “Design of 3 MeV S-band Electron Linac Structure With 2.5 Bunching Cells”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2934-2936. doi:10.18429/JACoW-IPAC2019-WEPRB055
[n] F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
[n] D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1781-1786. doi:10.18429/JACoW-ICALEPCS2017-THPHA159
[n] J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804. doi:10.18429/JACoW-SRF2021-THPCAV009
[n] C. Johnstone, W. Marsh, S. Lackey, J. Firebaugh, J. Smolucha, and K. Woodbury, “A Beam Position Monitor Data Acquisition System for the New Fermilab 400 MeV Line”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1912-1914.
[n] N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
[n] E. D. Kotina, A. V. Babin, P. V. Bazhanov, D. A. Ovsyannikov, V. A. Ploskikh, and Yu. Shirokolobov, “Mathematical and Computer Methods of Data Processing in Nuclear Medicine Studies”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 480-482. doi:10.18429/JACoW-RUPAC2016-WEPSB051
[n] L. V. Vladimirova and I. D. Rubtsova, “On Application of Monte Carlo Method for Poisson Problem Solving”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 368-371. doi:10.18429/JACoW-RUPAC2016-WEPSB007
[n] J. Y. Lee et al., “Design of 1.5 GeV Compact Storage Ring for the EUV and Soft X-rays”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1028-1030. doi:10.18429/JACoW-IPAC2019-MOPTS079
[n] R. D?â, “Automated Documentation of Tunes in the Beam Lines of the COMET Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 345-347. doi:10.18429/JACoW-Cyclotrons2016-THP17
[n] W. Busse, “Status of the VICKSI Tandem Injector Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E02, pp. 230-232.
[n] E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
[n] M. Tomizawa et al., “8 Gev Slow Extraction Beam Test for Muon to Electron Conversion Search Experiment at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2322-2325. doi:10.18429/JACoW-IPAC2019-WEPMP010
[n] F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
[n] M. E. Middendorf, F. R. Brumwell, J. C. Dooling, M. K. Lien, and G. E. McMichael, “The IPNS RCS RF System Third Cavity Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH029, pp. 834-836.
[n] M. Kimura et al., “Beam test of C-band Compact accelerating structure made of longitudinally-split two halves”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7627, unpublished.
[n] M. Di Carlo, M. Dolci, R. Smareglia, P. S. Swart, and G. M. le Roux, “Local Monitoring and Control System for the SKA Telescope Manager: A Knowledge-Based System Approach for Issues Identification Within a Logging Service”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 930-933. doi:10.18429/JACoW-ICALEPCS2015-WEPGF097
[n] J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “SIMS Sample Holder and Grain Orientation Effects”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 401. doi:10.18429/JACoW-SRF2021-TUPFDV002
[n] Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
[n] I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 301-304.
[n] D. Kr?ñmer, “The BESSY Soft X-ray FEL User Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF008, pp. 312-314.
[n] A. Marchionni, “Beam intensity upgrade at Fermilab”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOCP01, pp. 34-38.
[n] A. Jejcic, “Second Order Effects of a Sextupolar Field on Betatron Oscillations in a Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2445-2448.
[n] K. Yamada, “Upgrade and Current Status of High-Frequency Systems for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAI02, pp. 6-11. doi:10.18429/JACoW-CYCLOTRONS2022-MOAI02
[n] A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
[n] H. Abe et al., “Initial Results of RF Gun Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA56, pp. 2015-2017.
[n] V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357.
[n] A. V. Smirnov, A. R. Galimov, and A. N. Svidetelev, “Challenges of Obtaining of Ultra-High Vacuum in NICA Project”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 110-112. doi:10.18429/JACoW-RUPAC2018-THCDMH03
[n] S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893.
[n] C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX.
[n] L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147.
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
[n] R. N. Fernandes and D. P. Spruce, “BsxCuBE: a Control System for BioSAXS Experiments”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP005, pp. XX-XX.
[n] G. Sikler et al., “Fabrication of a Prototype of a Fast Cycling Superferric Dipole-Magnet”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP043, pp. 232-234.
[n] C. G. R. Geddes et al., “Scaled Simulation Design of High Quality Laser Wakefield Accelerator Stages”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP075, pp. 2970-2972.
[n] B. M. Cowan et al., “Laser Wakefield Simulation Using a Speed-of-Light Frame Envelope Model”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP018, pp. 4569-4569.
[n] M. Yoshioka et al., “High Gradient Studies on UHV Room Temperature Cavities at S-Band for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-95, pp. 302-304.
[n] G. W. Dodson and T. L. Williams, “Operational Availability of the SNS During Commissioning”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE033, pp. 2289-2291.
[n] I. D. Rubtsova, “On Modeling and Optimization of Intense Quasiperiodic Beam Dynamics”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 364-367. doi:10.18429/JACoW-RUPAC2016-WEPSB006
[n] L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
[n] M. Tanigaki et al., “Present Status of the FFAG Accelerator Complex in KURRI for ADS Study”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA115, pp. 803-805.
[n] N. K. Abrossimov, S. A. Artamonov, V. A. Eliseev, and G. A. Riabov, “Design and Modeling the SPIRAL Magnetic Structure for 80 MeV H- Isochronous Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-19, pp. 518-521.
[n] H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
[n] N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
[n] P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
[n] J. D. Fox and T. Mastorides, “Stripline Transversal Filter Techniques For Sub-Picosecond Bunch Timing Measurements”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB02, pp. 54-56.
[n] M. Meddahi et al., “LHC Abort Gap Monitoring and Cleaning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC009, pp. 474-476.
[n] H. Leboutet and D. T. Tran, “Variable Energy Accelerating Structure”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 553-558.
[n] J. Klabunde, A. A. Kolomiets, V. Pershin, I. Vorobyov, and S. Yaramishev, “DYNAMION - The Code for Beam Dynamics Simulations in High Current Ion Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP04F, pp. 1201-1203.
[n] P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
[n] M. Canzari, M. Di Carlo, M. Dolci, and R. Smareglia, “Using AI in the Fault Management Predictive Model of the SKA TM Services: A Preliminary Study”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 435-438. doi:10.18429/JACoW-ICALEPCS2017-TUPHA030
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
- V. C. Kempson, “Diamond: Ten Years of Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2797-2799.
- F. M. Russell, “A Strong-Focusing Cyclotron with Separated Orbits”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H03, pp. XX-XX.
- M. A. Mizintseva and D. A. Ovsyannikov, “On the Minimax Problem of Beam Dynamics Optimization”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 361-363.
- H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
- F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023.
- R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
- R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 412-414.
- G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
- J. K. Hawkins, R. B. Howard, and H. V. Nguyen, “Automated Real-Time Testing For Embedded Control Systems”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP037, pp. XX-XX.
- P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1151-1154.
- J. C. Dooling, M. K. Lien, and F. R. Brumwell, “A Real-Time Energy Monitor System for the IPNS LINAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC18, pp. 193-195.
- C. E. Reece, “An Experimental Analysis of Effective EP Parameters for Low-Frequency Cylindrical Nb Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 472-476.
- G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper WEP35, unpublished.
- C. M. Bhat, B. Hendricks, and J. J. Nelson, “Online Measurement of the Energy Spread of Multi-Turn Beam in the Fermilab Booster at Injection”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 237-241.
- L. Felsberger, U. Dorda, J. Uythoven, A. Apollonio, J. van de Walle, and D. Vandeplassche, “Quantitative availability modelling for the MYRRHA accelerator driven system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM105, pp. 5114-5117.
- M. Votava, B. Chase, and M. Wendt, “Controls, LLRF, and Instrumentation Systems for ILC Test Facilities at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS022, pp. 479-481.
- Y. Sato et al., “Control System for J-PARC Hadron Experimental Facility”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP108, pp. 331-333.
- M. Gonzalez-Berges et al., “Beam Instrumentation Simulation in Python”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP060, pp. 1454-1459.
- H. Jiang, L. Lai, Q. Yan, Z. Tang, Z. Xu, and S. Wang, “Development of analog front-end module for the BPM signal processor at SSRF”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 690-693.
- J.-F. Ostiguy, C. M. Bhat, and V. A. Lebedev, “Modeling Longitudinal Dynamics in the Fermilab Booster Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 873-876.
- T. A. Miller, D. M. Gassner, V. Litvinenko, M. G. Minty, I. Pinayev, and B. Sheehy, “Infrared Diagnostics Instrumentation Design for the Coherent Electron Cooling Proof of Principle Experiment”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP074, pp. 905-908.
- M. Ferrario et al., “Status of the SPARC Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF042, pp. 399-401.
- J. E. Griffin, “Compensation for Beam Loading in the 400-GeV Fermilab Main Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1910-1914.
- J. Tan, B. Bonin, and H. Safa, “Field Emission and High Voltage Cleaning of Particulate Contaminants on Extended Metallic Surfaces”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C01, pp. 365-368.
- U. Pudasaini, G. V. Eremeev, M. J. Kelley, and C. E. Reece, “Recent Developments of Nb?Sn at Jefferson Lab for SRF Accelerator Application”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 713-716.
- J. D. Gilpatrick et al., “Proposed Beam Diagnostics Instrumentation for the LANSCE Refurbishment Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS051, pp. 4099-4101.
- H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
- N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2069-2071.
- R. Die-Cas, H. Leboutet, and J. Pottier, “Performance Evaluation of a Heavy Ion RF Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3520-3523.
- I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1948-1951.
- J. E. Griffin, “The Effect of Large Delays on Beam RF Phase Lock Loops”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3944-3947.
- Y. Joo, P. Buaphad, Y. Kim, H. R. Lee, J. Y. Lee, and S. Lee, “Design of 3 MeV S-band Electron Linac Structure With 2.5 Bunching Cells”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2934-2936.
- F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
- D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1781-1786.
- J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804.
- C. Johnstone, W. Marsh, S. Lackey, J. Firebaugh, J. Smolucha, and K. Woodbury, “A Beam Position Monitor Data Acquisition System for the New Fermilab 400 MeV Line”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1912-1914.
- N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
- E. D. Kotina, A. V. Babin, P. V. Bazhanov, D. A. Ovsyannikov, V. A. Ploskikh, and Yu. Shirokolobov, “Mathematical and Computer Methods of Data Processing in Nuclear Medicine Studies”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 480-482.
- L. V. Vladimirova and I. D. Rubtsova, “On Application of Monte Carlo Method for Poisson Problem Solving”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 368-371.
- J. Y. Lee et al., “Design of 1.5 GeV Compact Storage Ring for the EUV and Soft X-rays”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1028-1030.
- R. D?â, “Automated Documentation of Tunes in the Beam Lines of the COMET Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 345-347.
- W. Busse, “Status of the VICKSI Tandem Injector Project”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper E02, pp. 230-232.
- E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
- M. Tomizawa et al., “8 Gev Slow Extraction Beam Test for Muon to Electron Conversion Search Experiment at J-PARC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2322-2325.
- F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
- M. E. Middendorf, F. R. Brumwell, J. C. Dooling, M. K. Lien, and G. E. McMichael, “The IPNS RCS RF System Third Cavity Upgrade”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH029, pp. 834-836.
- M. Kimura et al., “Beam test of C-band Compact accelerating structure made of longitudinally-split two halves”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7627, this conference.
- M. Di Carlo, M. Dolci, R. Smareglia, P. S. Swart, and G. M. le Roux, “Local Monitoring and Control System for the SKA Telescope Manager: A Knowledge-Based System Approach for Issues Identification Within a Logging Service”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 930-933.
- J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “SIMS Sample Holder and Grain Orientation Effects”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 401.
- Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
- I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 301-304.
- D. Kr?ñmer, “The BESSY Soft X-ray FEL User Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF008, pp. 312-314.
- A. Marchionni, “Beam intensity upgrade at Fermilab”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOCP01, pp. 34-38.
- A. Jejcic, “Second Order Effects of a Sextupolar Field on Betatron Oscillations in a Storage Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2445-2448.
- K. Yamada, “Upgrade and Current Status of High-Frequency Systems for RIKEN Ring Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOAI02, pp. 6-11.
- A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
- H. Abe et al., “Initial Results of RF Gun Experiment”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA56, pp. 2015-2017.
- V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357.
- A. V. Smirnov, A. R. Galimov, and A. N. Svidetelev, “Challenges of Obtaining of Ultra-High Vacuum in NICA Project”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 110-112.
- S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893.
- C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX.
- L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
- R. N. Fernandes and D. P. Spruce, “BsxCuBE: a Control System for BioSAXS Experiments”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP005, pp. XX-XX.
- G. Sikler et al., “Fabrication of a Prototype of a Fast Cycling Superferric Dipole-Magnet”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP043, pp. 232-234.
- C. G. R. Geddes et al., “Scaled Simulation Design of High Quality Laser Wakefield Accelerator Stages”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP075, pp. 2970-2972.
- B. M. Cowan et al., “Laser Wakefield Simulation Using a Speed-of-Light Frame Envelope Model”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP018, pp. 4569-4569.
- M. Yoshioka et al., “High Gradient Studies on UHV Room Temperature Cavities at S-Band for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-95, pp. 302-304.
- G. W. Dodson and T. L. Williams, “Operational Availability of the SNS During Commissioning”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE033, pp. 2289-2291.
- I. D. Rubtsova, “On Modeling and Optimization of Intense Quasiperiodic Beam Dynamics”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 364-367.
- L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
- M. Tanigaki et al., “Present Status of the FFAG Accelerator Complex in KURRI for ADS Study”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA115, pp. 803-805.
- N. K. Abrossimov, S. A. Artamonov, V. A. Eliseev, and G. A. Riabov, “Design and Modeling the SPIRAL Magnetic Structure for 80 MeV H- Isochronous Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-19, pp. 518-521.
- H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
- N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
- P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
- J. D. Fox and T. Mastorides, “Stripline Transversal Filter Techniques For Sub-Picosecond Bunch Timing Measurements”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB02, pp. 54-56.
- M. Meddahi et al., “LHC Abort Gap Monitoring and Cleaning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC009, pp. 474-476.
- H. Leboutet and D. T. Tran, “Variable Energy Accelerating Structure”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 553-558.
- J. Klabunde, A. A. Kolomiets, V. Pershin, I. Vorobyov, and S. Yaramishev, “DYNAMION - The Code for Beam Dynamics Simulations in High Current Ion Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP04F, pp. 1201-1203.
- P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
- M. Canzari, M. Di Carlo, M. Dolci, and R. Smareglia, “Using AI in the Fault Management Predictive Model of the SKA TM Services: A Preliminary Study”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 435-438.
Back to search