Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Lamy et al., “Fine Frequency Tuning of the PHOENIX Charge Breeder Used as a Probe for ECRIS Plasmas”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper WECOBK03, pp. 184-187.
[n] J.-L. Biarrotte, S. Blivet, S. Bousson, T. Junquera, G. Olry, and H. Saugnac, “Design Study of a 176 MHz SRF Half Wave Resonator for the SPIRAL-2 Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP02, pp. 269-273.
[n] M. Ishii, T. Fukui, T. Masuda, and T. Ohata, “A Software Framework to Control a Network-connected Equipment as a Pseudo Device”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP572, pp. XX-XX.
[n] D. R. Broemmelsiek and S. Nagaitsev, “Clearing Electrodes for Vacuum Monitoring at the Fermilab Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF072, pp. 1771-1773.
[n] F. Tamura, C. Ohmori, Y. Sugiyama, and M. Yoshii, “Non-Adiabatic Longitudinal Bunch Manipulation at Flattop of the J-PARC MR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3023-3026. doi:10.18429/JACoW-IPAC2021-WEPAB178
[n] J. B. Flanz, K. D. Jacobs, and B. G. McAllister, “Use of Design Codes for On-Line Beam Diagnostics at the MIT-Bates Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1875-1878.
[n] K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
[n] O. E. Shishanin, “Dependence on Betatron Oscillations of the Angular Velocity”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB013, pp. 340-341.
[n] Y. Morita et al., “Correcting asymmetry of closed-orbit distortion in J-PARC main ring by reducing current ripples of main magnet power supplies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 931-934. doi:10.18429/JACoW-IPAC2024-TUAD2
[n] R. Xiang et al., “Runing Status of SRF Gun II at the ELBE Radiation Center”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 952-954. doi:10.18429/JACoW-LINAC2018-THPO125
[n] H. A. Koivisto et al., “Ion Source Related Research Work at JYFL”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP049, pp. 150-152.
[n] A. Mazzolari et al., “Fabrication of Silicon Strip Crystals for UA9 Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC080, pp. 4243-4245.
[n] M. Pivi and M. Furman, “Mitigation of the Electron-Cloud Effect in the PSR and SNS Proton Storage Rings by Tailoring the Bunch Profile”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG024, pp. 3222-3224.
[n] B. P. Xiao et al., “RF Design of Normal Conducting 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 532-535. doi:10.18429/JACoW-IPAC2016-MOPMY010
[n] H. Tarawneh et al., “Universal mode of operation of the APPLE II undulators at the MAX IV 1.5 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM066, unpublished.
[n] D. R. Broemmelsiek, M. Hu, and S. Nagaitsev, “Stochastic Cooling in Barrier Buckets at the Fermilab Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT110, pp. 794-796.
[n] P. Pucyk, W. Jalmuzna, and S. Simrock, “Real Time, Distributed, Hardware-software Simulation of Multicavity RF Station for LLRF System Development in FLASH and XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC146, pp. 1413-1415.
[n] A. Noda et al., “Acceleration Scheme of Radioactive Ion Beam with HIMAC and its Injector Linac”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB03, pp. 197-199.
[n] R. L. Ayres, E. R. Martin, R. E. Trout, B. L. Wilson, and N. R. Yoder, “NBS/LANL Racetrack Microtron Control System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2086-2089.
[n] H. G. Kirk, “Targetry for a µ+ µ- Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP34, pp. 3029-3031.
[n] A. Latina, “The Tracking Code RF-Track and Its Application”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 245-248. doi:10.18429/JACoW-HB2023-WEA3C1
[n] J. Hock, K. A. Brown, J. Glenn, and T. Russo, “The AGS Electrostatic Septum”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB067, pp. 3422-3424.
[n] M. Fukuda et al., “Use of Microbeam at JAEA Takasaki”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZH102, pp. 588-591.
[n] F. Marcellini, “Kickers for Injection and Extraction in Damping, Combiner and Storage Rings”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THYMA01, pp. 539-543.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Lamy et al., “Fine Frequency Tuning of the PHOENIX Charge Breeder Used as a Probe for ECRIS Plasmas”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper WECOBK03, pp. 184-187.
- J.-L. Biarrotte, S. Blivet, S. Bousson, T. Junquera, G. Olry, and H. Saugnac, “Design Study of a 176 MHz SRF Half Wave Resonator for the SPIRAL-2 Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP02, pp. 269-273.
- M. Ishii, T. Fukui, T. Masuda, and T. Ohata, “A Software Framework to Control a Network-connected Equipment as a Pseudo Device”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP572, pp. XX-XX.
- D. R. Broemmelsiek and S. Nagaitsev, “Clearing Electrodes for Vacuum Monitoring at the Fermilab Recycler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF072, pp. 1771-1773.
- F. Tamura, C. Ohmori, Y. Sugiyama, and M. Yoshii, “Non-Adiabatic Longitudinal Bunch Manipulation at Flattop of the J-PARC MR”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3023-3026.
- J. B. Flanz, K. D. Jacobs, and B. G. McAllister, “Use of Design Codes for On-Line Beam Diagnostics at the MIT-Bates Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1875-1878.
- K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
- O. E. Shishanin, “Dependence on Betatron Oscillations of the Angular Velocity”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB013, pp. 340-341.
- Y. Morita et al., “Correcting asymmetry of closed-orbit distortion in J-PARC main ring by reducing current ripples of main magnet power supplies”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUAD2, pp. 931-934.
- R. Xiang et al., “Runing Status of SRF Gun II at the ELBE Radiation Center”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 952-954.
- H. A. Koivisto et al., “Ion Source Related Research Work at JYFL”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP049, pp. 150-152.
- A. Mazzolari et al., “Fabrication of Silicon Strip Crystals for UA9 Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC080, pp. 4243-4245.
- M. Pivi and M. Furman, “Mitigation of the Electron-Cloud Effect in the PSR and SNS Proton Storage Rings by Tailoring the Bunch Profile”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG024, pp. 3222-3224.
- B. P. Xiao et al., “RF Design of Normal Conducting 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 532-535.
- H. Tarawneh et al., “Universal mode of operation of the APPLE II undulators at the MAX IV 1.5 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM066, this conference.
- D. R. Broemmelsiek, M. Hu, and S. Nagaitsev, “Stochastic Cooling in Barrier Buckets at the Fermilab Recycler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT110, pp. 794-796.
- P. Pucyk, W. Jalmuzna, and S. Simrock, “Real Time, Distributed, Hardware-software Simulation of Multicavity RF Station for LLRF System Development in FLASH and XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC146, pp. 1413-1415.
- A. Noda et al., “Acceleration Scheme of Radioactive Ion Beam with HIMAC and its Injector Linac”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB03, pp. 197-199.
- R. L. Ayres, E. R. Martin, R. E. Trout, B. L. Wilson, and N. R. Yoder, “NBS/LANL Racetrack Microtron Control System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2086-2089.
- H. G. Kirk, “Targetry for a µ+ µ- Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP34, pp. 3029-3031.
- A. Latina, “The Tracking Code RF-Track and Its Application”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA3C1, pp. 245-248.
- J. Hock, K. A. Brown, J. Glenn, and T. Russo, “The AGS Electrostatic Septum”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB067, pp. 3422-3424.
- M. Fukuda et al., “Use of Microbeam at JAEA Takasaki”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THZH102, pp. 588-591.
- F. Marcellini, “Kickers for Injection and Extraction in Damping, Combiner and Storage Rings”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THYMA01, pp. 539-543.
Back to search