Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Farokhi, “Self-Field in Free-Electron Laser with Planar Wiggler and Ion Channel Guiding”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP020, pp. XX-XX.
[n] C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
[n] S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
[n] C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
[n] M. A. Green, “Cooling Intrinsically Stable Superconducting Magnets with Supercritical Helium”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 669-671.
[n] R. F. Nylander, F. F. Bacci, M. V. Fazio, and J. D. Rogers, “Performance Tests of the 600-kW cw, 80-MHz, Radio-Frequency Systems for the FMIT Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3438-3441.
[n] F. Toufexis et al., “Automated Management of Libera SPARK Module IOCs in SPEAR3”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 51-55. doi:10.18429/JACoW-IBIC2020-TUPP12
[n] J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
[n] F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
[n] A. Osa et al., “The RI Beams from the Tokai Radioactive Ion Accelerator Complex (TRIAC)”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-03, pp. XX-XX.
[n] L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3036-3039. doi:10.18429/JACoW-IPAC2016-WEPOY024
[n] S. Kashiwagi, G. Isoyama, R. Kato, N. Noda, K. Tsuchiya, and S. Yamamoto, “Strong Focusing Wiggler for SASE and FEL in the Far-Infrared Region at ISIR, Osaka University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP059, pp. XX-XX.
[n] J. Norem et al., “Dark Current and X Ray Measurements of an 805 MHz Pillbox Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB003, pp. 1183-1185.
[n] P. K. Skowro, M. Giovannozzi, and A. Huschauer, “Linear and Non-Linear Optics Measurements in PS using Turn-by-Turn BPM Data”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1114-1117. doi:10.18429/JACoW-IPAC2019-MOPTS102
[n] C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
[n] C. M. Chu et al., “First Test of Orbit Response Matrix in Proton Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V042, pp. 1481-1483.
[n] M. Min, A. Mametjanov, and J. Fu, “Hybrid Programming and Performance for Beam Propagation Modeling”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC1, pp. 284-286.
[n] M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
[n] Z. Altinbas, J. P. Jamilkowski, D. Kayran, R. C. Lee, and B. Oerter, “The Machine Protection System for the R&D Energy Recovery LINAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP277, pp. 630-632.
[n] T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
[n] H. Bluem, J. Rathke, T. Schultheiss, and M. Cole, “Thermal Structural Analysis of an SCRF Photocathode Electron Gun Cavity”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB12, pp. 119-121.
[n] K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
[n] Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
[n] A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968.
[n] R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
[n] Y. Shobuda, Y. H. Chin, M. Ikegami, and T. Toyama, “Stabilization of Beam Instability due to Space-Charge Effects at J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP072, pp. 4701-4703.
[n] A. Pisent, R. Celentano, and R. Zennaro, “Equivalent Lumped Circuit Study for the Field Stabilization of a Long Four-Vanes RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4086, pp. 968-970.
[n] K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2203-2205. doi:10.18429/JACoW-IPAC2018-WEPAL022
[n] M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
[n] R. A. Byrns, “Review of SC/RF Refrigeration Systems”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89D03, pp. XX-XX.
[n] R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
[n] J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1497-1500. doi:10.18429/JACoW-IPAC2016-TUPMW028
[n] M. Kim, J. Kim, S. W. Lee, I. H. Nam, and H. Suk, “Feasibility Study of a Laser-Driven High Energy Electron Acceleration in a Long Up-Ramp Density”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2576-2578. doi:10.18429/JACoW-IPAC2016-WEPMY014
[n] B. C. Brown et al., “Studies of Beam Properties and Main Injector Loss Control using Collimators in the Fermilab Booster to Main Injector Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS010, pp. 1670-1672.
[n] S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1342, unpublished.
[n] K. Hatanaka, M. Fukuda, T. Yorita, T. Kawaguchi, K. Noda, and Y. Sakemi, “Application of HTS Wire to Magnets”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP085, pp. 224-226.
[n] E. Kadokura, T. Ishida, and T. Kawakubo, “Direct Measuring System of the Time Dependence of the Beam Size by a Non-destructive Beam Profile Monitor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1652-1655.
[n] G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
[n] K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
[n] A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB036, pp. 933-935.
[n] M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
[n] C. S. Chen et al., “The Flexible Customized Supervisor and Control System for Utility in TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1085-1087. doi:10.18429/JACoW-IPAC2015-MOPTY063
[n] M. Min and P. F. Fischer, “Performance Analysis on the IBM Blue Gene/P for Wakefield Calculations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP137, pp. 1737-1739.
[n] F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 364-369. doi:10.18429/JACoW-SRF2019-TUFUB3
[n] K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
[n] B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 321-323. doi:10.18429/JACoW-MEDSI2018-THOPMA01
[n] A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 13-16. doi:10.18429/JACoW-LINAC2024-MOAA002
[n] G. Schaffer, “High Power UHF Components for DESY”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 208-213.
[n] R. S. Livingston, “Session IV Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
[n] J. P. Holzbauer, D. Passarelli, and Y. M. Pischalnikov, “Testing of SSR1 Production Tuner for PIP-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2681-2683. doi:10.18429/JACoW-IPAC2018-WEPML005
[n] M. Yoshii et al., “Status of the J-PARC Ring RF Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC006, pp. 3281-3283.
[n] I. Reichel, “Frequency Map Studies for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN116, pp. 2987-2989.
[n] L. N. Blumberg et al., “Initial Performance of the AGS Slow External Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 234-242.
[n] P. Craievich et al., “The FCCee Pre-Injector Complex”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2007-2010. doi:10.18429/JACoW-IPAC2022-WEPOPT063
[n] A. W. Molvik et al., “New experimental measurements of electron clouds in ion beams with large tune depression”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAW02, pp. 288-292.
[n] M. Takao, “Impact of Betatron Motion on Path Lengthening and Momentum Aperture in a Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC072, pp. 3152-3154.
[n] K. P. Nesteruk, C. Calzolaio, and J. M. Schippers, “Alignment of a Magnetic Lattice Based on Particle Tracking”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 324-326. doi:10.18429/JACoW-IPAC2019-MOPGW090
[n] C. Barthe-Dejean et al., “Mechanical Engineering Design and Simulation for SPIRAL2 Accelerator @GANIL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 302-305. doi:10.18429/JACoW-MEDSI2018-THOAMA03
[n] R. Ganter et al., “Peak Current Performances from Electron Sources based on Field Emission (Single Tip and Field Emitter Arrays (FEAs))”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THCAU04, pp. 781-784.
[n] F. Le Pimpec, A. Adelmann, S. Reiche, R. Zennaro, and B. Grigoryan, “Dark Current Studies for SwissFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD36, pp. 105-108.
[n] P. Piot, Y.-E. Sun, and K.-J. Kim, “Limiting Effects in the Round-To-Flat Beam Transformation”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP47, pp. 150-152.
[n] M. Pereira et al., “Feed-forward in the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHAULT01, pp. 1302-1305.
[n] E. Sombrowski and K. Rehlich, “First Experiences with jddd for PETRA Vacuum Controls”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUZ04, pp. 74-76.
[n] Y. H. Chin, “Longitudinal Beam Instabilities in the Barrier RF System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B004, pp. 1545-1547.
[n] S. Ninomiya, K. Hatanaka, Y. Sakemi, T. Kawaguchi, and N. Takahashi, “The Study of High Magnetic Field and AC Operation of High Temperature Superconducting Magnet”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM403, pp. XX-XX.
[n] B. Giaccone, D. Passarelli, M. Parise, T. Aiazzi, and V. Roger, “Experimental investigation of plasma processing for PIP-II SSR2 cavities”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP42, unpublished.
[n] I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
[n] M. P. Bourgarel, P. Attal, and E. Baron, “Modification of the GANIL Injectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-08, pp. 111-115.
[n] A. Kitagawa et al., “Status of ECR Ion Sources for Carbon-ion Radiotherapy in Japan”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRYA02, pp. 200-202.
[n] Y. Suetsugu, T. Ishibashi, S. Terui, H. Ishizaki, A. Kimura, and T. Sawhata, “Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3654-3656. doi:10.18429/JACoW-IPAC2016-THPMY002
[n] J. Steimel et al., “Beam Commissioning Status and Results of the FNAL PIP2IT Linear Accelerator RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1002-1004. doi:10.18429/JACoW-LINAC2016-THPLR065
[n] D. E. Johnson, K. L. Duel, M. H. Gardner, T. R. Johnson, V. E. Scarpine, and R. Tesarek, “Fermilab Linac Laser Notcher”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3328-3330. doi:10.18429/JACoW-IPAC2015-WEPTY028
[n] Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 475-478.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
[n] A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
[n] E. Baron et al., “Preliminary Design of a New High Intensity Injection System for GANIL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-12, pp. 372-375.
[n] C. H. Ho et al., “The Status of S-Band RF Gun System at SRRC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA54, pp. 2009-2011.
[n] Y. Cai and I. Reichel, “New Method of Dispersion Correction in the PEP-II Low Energy Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A09, pp. 1069-1070.
[n] E. Sombrowski, P. Gessler, J. M. Meyer, A. Petrosyan, and K. Rehlich, “JDDD in Action”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP035, pp. 164-166.
[n] F. S. Carlier, E. H. Maclean, T. Persson, and R. Tomas, “Nonlinear Correction Strategies for the LHC Using Resonance Driving Terms”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 161-164. doi:10.18429/JACoW-IPAC2018-MOPMF032
[n] L. Emery, K. C. Harkay, and V. Sajaev, “Alternate Hybrid Mode Bunch Patterns for the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP002, pp. 1084-1086.
[n] T. C. Tseng et al., “The Auto-Alignment Girder System of TPS Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3649-3653. doi:10.18429/JACoW-IPAC2015-THYB2
[n] S. Mickat et al., “The SC CW LINAC Demonstrator ÔÇô 1st Test of an SC CH-cavity with Heavy Ions”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEC03, pp. 182-184.
[n] W. Tizzano, T. Connolley, S. Davies, M. Drakopoulos, and G. E. Howell, “Design and FEA of an Innovative Rotating Sic Filter for High-Energy X-Ray Beam”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 306-311. doi:10.18429/JACoW-MEDSI2018-THOAMA04
[n] E. Sombrowski, R. Kammering, and K. R. Rehlich, “A HTML5 Web Interface for JAVA DOOCS Data Display”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1056-1058. doi:10.18429/JACoW-ICALEPCS2015-WEPGF150
[n] F. Kramer et al., “Simulations and Measurements of the BPM Non Linearity and Kicker Timing Influence on the Tune Shift With Amplitude (TSWA) Measurement at BESSY II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2107-2109. doi:10.18429/JACoW-IPAC2018-WEPAK010
[n] J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
[n] I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 776-779. doi:10.18429/JACoW-IPAC2023-MOPL095
[n] N. Nakamura, “Resistive-Wall Impedance Effects for the New KEK Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3095-3097. doi:10.18429/JACoW-IPAC2017-WEPIK071
[n] A. Noda, K. Chida, A. Mizobuchi, F. Soga, and M. Yoshizawa, “DC Septum Magnet for Beam Extraction”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 363-366.
[n] I. Reichel and A. Wolski, “Tracking Studies to Determine the Required Wiggler Aperture for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS137, pp. 879-881.
[n] L. E. Boon, R. J. Dejus, K. C. Harkay, and M. S. Jaski, “Comparison of Simulations and Analytical Theory of Radiation Heating on the Advanced Photon Source Superconducting Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC06, pp. 1148-1150.
[n] J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1828-1831.
[n] T. Tomimasu, “A 500 MeV Low Operating Cost Electron Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3523-3526.
[n] Y. H. Chin, “Analysis of Transverse Instabilities Observed at J-PARC MR and their Suppression using Feedback Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOYBB1, pp. 27-31.
[n] J. R. Calvey, K. C. Harkay, and C. Yao, “Ion Effects in the APS Particle Accumulator Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1123-1125. doi:10.18429/JACoW-NAPAC2016-THPOA14
[n] K. Tsuchiya, T. Ogitsu, N. Ohuchi, N. Toge, and T. Ozaki, “Construction of the Final Focus Superconducting Magnet System for KEKB”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D071, pp. 573-575.
[n] G. S. Brown, V. P. Suller, and E. Zinin, “Measurement of Bunch Length with an Image Dissector Tube”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2348-2351.
[n] A. Sattarov, E. F. Holik, A. D. McInturff, and P. M. McIntyre, “Nb3Sn Block-coil Dipole for High-field Substitution in the LHC Lattice”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP104, pp. 1033-1034.
[n] T. Yamamoto et al., “Application of Portable 950 keV X-Band Linac X-Ray Source to Condition Based Maintenance for Pump-Impeller”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP003, pp. 1293-1295.
[n] G. Maero et al., “Simulation of Cooling Mechanisms of Highly-charged Ions in the HITRAP Cooler Trap”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper WEM2C06, pp. 130-133.
[n] C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2239-2241. doi:10.18429/JACoW-IPAC2021-TUPAB318
[n] Y. H. Chin, “Influence of the Synchrotron Radiation on the Particle Dynamics in a Rectangular Undulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 809-812.
[n] M. Kodaira et al., “Design and Performance of the Electron Synchrotron for the 1-GeV Synchrotron Radiation Source at Sortec”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 409-412.
[n] J. G. Power, M. E. Conde, W. Gai, W. Liu, and P. Piot, “Pepper-Pot Based Diagnostics for the Measurement of the 4D Transverse Phase Space Distribution from an RF Photoinjector at the AWA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP005, pp. 3444-3446.
[n] C. L. Olson, C. A. Frost, R. A. Gerber, and J. R. Woodworth, “The IFA-2 Collective Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3349-3352.
[n] M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 968-970. doi:10.18429/JACoW-IPAC2019-MOPTS048
[n] P. Krejcik et al., “Recent Improvements in the SLC Positron System Performance”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 527-530.
[n] R. Kinjo et al., “End Field Termination for Bulk HTSC Staggered Array Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD029, pp. 3156-3158.
[n] W. M. Fawley and J.-L. Vay, “Fully Electromagnetic FEL Simulation via Lorentz-Boosted Frame Transformation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB01, pp. 48-51.
[n] M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Farokhi, “Self-Field in Free-Electron Laser with Planar Wiggler and Ion Channel Guiding”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP020, pp. XX-XX.
- C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
- S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
- C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
- M. A. Green, “Cooling Intrinsically Stable Superconducting Magnets with Supercritical Helium”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 669-671.
- R. F. Nylander, F. F. Bacci, M. V. Fazio, and J. D. Rogers, “Performance Tests of the 600-kW cw, 80-MHz, Radio-Frequency Systems for the FMIT Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3438-3441.
- F. Toufexis et al., “Automated Management of Libera SPARK Module IOCs in SPEAR3”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 51-55.
- J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
- F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
- A. Osa et al., “The RI Beams from the Tokai Radioactive Ion Accelerator Complex (TRIAC)”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-03, pp. XX-XX.
- L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3036-3039.
- S. Kashiwagi, G. Isoyama, R. Kato, N. Noda, K. Tsuchiya, and S. Yamamoto, “Strong Focusing Wiggler for SASE and FEL in the Far-Infrared Region at ISIR, Osaka University”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP059, pp. XX-XX.
- J. Norem et al., “Dark Current and X Ray Measurements of an 805 MHz Pillbox Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB003, pp. 1183-1185.
- P. K. Skowro, M. Giovannozzi, and A. Huschauer, “Linear and Non-Linear Optics Measurements in PS using Turn-by-Turn BPM Data”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1114-1117.
- C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468.
- C. M. Chu et al., “First Test of Orbit Response Matrix in Proton Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V042, pp. 1481-1483.
- M. Min, A. Mametjanov, and J. Fu, “Hybrid Programming and Performance for Beam Propagation Modeling”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC1, pp. 284-286.
- M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
- Z. Altinbas, J. P. Jamilkowski, D. Kayran, R. C. Lee, and B. Oerter, “The Machine Protection System for the R&D Energy Recovery LINAC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP277, pp. 630-632.
- T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
- H. Bluem, J. Rathke, T. Schultheiss, and M. Cole, “Thermal Structural Analysis of an SCRF Photocathode Electron Gun Cavity”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB12, pp. 119-121.
- K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
- Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
- A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968.
- R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
- Y. Shobuda, Y. H. Chin, M. Ikegami, and T. Toyama, “Stabilization of Beam Instability due to Space-Charge Effects at J-PARC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP072, pp. 4701-4703.
- A. Pisent, R. Celentano, and R. Zennaro, “Equivalent Lumped Circuit Study for the Field Stabilization of a Long Four-Vanes RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4086, pp. 968-970.
- K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2203-2205.
- M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
- R. A. Byrns, “Review of SC/RF Refrigeration Systems”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89D03, pp. XX-XX.
- R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
- J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1497-1500.
- M. Kim, J. Kim, S. W. Lee, I. H. Nam, and H. Suk, “Feasibility Study of a Laser-Driven High Energy Electron Acceleration in a Long Up-Ramp Density”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2576-2578.
- B. C. Brown et al., “Studies of Beam Properties and Main Injector Loss Control using Collimators in the Fermilab Booster to Main Injector Transfer Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS010, pp. 1670-1672.
- S. Morton, D. Bizzozero, L. Ge, Z. Li, E. Nanni, and W. H. Tan, “Damping Higher Order Modes for the Cool Copper Collider”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1342, this conference.
- K. Hatanaka, M. Fukuda, T. Yorita, T. Kawaguchi, K. Noda, and Y. Sakemi, “Application of HTS Wire to Magnets”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP085, pp. 224-226.
- E. Kadokura, T. Ishida, and T. Kawakubo, “Direct Measuring System of the Time Dependence of the Beam Size by a Non-destructive Beam Profile Monitor”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1652-1655.
- G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
- K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
- A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB036, pp. 933-935.
- M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
- C. S. Chen et al., “The Flexible Customized Supervisor and Control System for Utility in TPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1085-1087.
- M. Min and P. F. Fischer, “Performance Analysis on the IBM Blue Gene/P for Wakefield Calculations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP137, pp. 1737-1739.
- F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 364-369.
- K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
- B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 321-323.
- A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 13-16.
- G. Schaffer, “High Power UHF Components for DESY”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 208-213.
- R. S. Livingston, “Session IV Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
- J. P. Holzbauer, D. Passarelli, and Y. M. Pischalnikov, “Testing of SSR1 Production Tuner for PIP-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2681-2683.
- M. Yoshii et al., “Status of the J-PARC Ring RF Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC006, pp. 3281-3283.
- I. Reichel, “Frequency Map Studies for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN116, pp. 2987-2989.
- L. N. Blumberg et al., “Initial Performance of the AGS Slow External Beam”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 234-242.
- P. Craievich et al., “The FCCee Pre-Injector Complex”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2007-2010.
- A. W. Molvik et al., “New experimental measurements of electron clouds in ion beams with large tune depression”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAW02, pp. 288-292.
- M. Takao, “Impact of Betatron Motion on Path Lengthening and Momentum Aperture in a Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC072, pp. 3152-3154.
- K. P. Nesteruk, C. Calzolaio, and J. M. Schippers, “Alignment of a Magnetic Lattice Based on Particle Tracking”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 324-326.
- C. Barthe-Dejean et al., “Mechanical Engineering Design and Simulation for SPIRAL2 Accelerator @GANIL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 302-305.
- R. Ganter et al., “Peak Current Performances from Electron Sources based on Field Emission (Single Tip and Field Emitter Arrays (FEAs))”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THCAU04, pp. 781-784.
- F. Le Pimpec, A. Adelmann, S. Reiche, R. Zennaro, and B. Grigoryan, “Dark Current Studies for SwissFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD36, pp. 105-108.
- P. Piot, Y.-E. Sun, and K.-J. Kim, “Limiting Effects in the Round-To-Flat Beam Transformation”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP47, pp. 150-152.
- M. Pereira et al., “Feed-forward in the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHAULT01, pp. 1302-1305.
- E. Sombrowski and K. Rehlich, “First Experiences with jddd for PETRA Vacuum Controls”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUZ04, pp. 74-76.
- Y. H. Chin, “Longitudinal Beam Instabilities in the Barrier RF System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B004, pp. 1545-1547.
- S. Ninomiya, K. Hatanaka, Y. Sakemi, T. Kawaguchi, and N. Takahashi, “The Study of High Magnetic Field and AC Operation of High Temperature Superconducting Magnet”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM403, pp. XX-XX.
- B. Giaccone, D. Passarelli, M. Parise, T. Aiazzi, and V. Roger, “Experimental investigation of plasma processing for PIP-II SSR2 cavities”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP42, unpublished.
- I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
- M. P. Bourgarel, P. Attal, and E. Baron, “Modification of the GANIL Injectors”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-08, pp. 111-115.
- A. Kitagawa et al., “Status of ECR Ion Sources for Carbon-ion Radiotherapy in Japan”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper FRYA02, pp. 200-202.
- Y. Suetsugu, T. Ishibashi, S. Terui, H. Ishizaki, A. Kimura, and T. Sawhata, “Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3654-3656.
- J. Steimel et al., “Beam Commissioning Status and Results of the FNAL PIP2IT Linear Accelerator RFQ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1002-1004.
- D. E. Johnson, K. L. Duel, M. H. Gardner, T. R. Johnson, V. E. Scarpine, and R. Tesarek, “Fermilab Linac Laser Notcher”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3328-3330.
- Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 475-478.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
- A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
- E. Baron et al., “Preliminary Design of a New High Intensity Injection System for GANIL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-12, pp. 372-375.
- C. H. Ho et al., “The Status of S-Band RF Gun System at SRRC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA54, pp. 2009-2011.
- Y. Cai and I. Reichel, “New Method of Dispersion Correction in the PEP-II Low Energy Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A09, pp. 1069-1070.
- E. Sombrowski, P. Gessler, J. M. Meyer, A. Petrosyan, and K. Rehlich, “JDDD in Action”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP035, pp. 164-166.
- F. S. Carlier, E. H. Maclean, T. Persson, and R. Tomas, “Nonlinear Correction Strategies for the LHC Using Resonance Driving Terms”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 161-164.
- L. Emery, K. C. Harkay, and V. Sajaev, “Alternate Hybrid Mode Bunch Patterns for the Advanced Photon Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP002, pp. 1084-1086.
- T. C. Tseng et al., “The Auto-Alignment Girder System of TPS Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3649-3653.
- S. Mickat et al., “The SC CW LINAC Demonstrator ÔÇô 1st Test of an SC CH-cavity with Heavy Ions”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEC03, pp. 182-184.
- W. Tizzano, T. Connolley, S. Davies, M. Drakopoulos, and G. E. Howell, “Design and FEA of an Innovative Rotating Sic Filter for High-Energy X-Ray Beam”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 306-311.
- E. Sombrowski, R. Kammering, and K. R. Rehlich, “A HTML5 Web Interface for JAVA DOOCS Data Display”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1056-1058.
- F. Kramer et al., “Simulations and Measurements of the BPM Non Linearity and Kicker Timing Influence on the Tune Shift With Amplitude (TSWA) Measurement at BESSY II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2107-2109.
- J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
- I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL095, pp. 776-779.
- N. Nakamura, “Resistive-Wall Impedance Effects for the New KEK Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3095-3097.
- A. Noda, K. Chida, A. Mizobuchi, F. Soga, and M. Yoshizawa, “DC Septum Magnet for Beam Extraction”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 363-366.
- I. Reichel and A. Wolski, “Tracking Studies to Determine the Required Wiggler Aperture for the ILC Damping Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS137, pp. 879-881.
- L. E. Boon, R. J. Dejus, K. C. Harkay, and M. S. Jaski, “Comparison of Simulations and Analytical Theory of Radiation Heating on the Advanced Photon Source Superconducting Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC06, pp. 1148-1150.
- J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1828-1831.
- T. Tomimasu, “A 500 MeV Low Operating Cost Electron Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3523-3526.
- Y. H. Chin, “Analysis of Transverse Instabilities Observed at J-PARC MR and their Suppression using Feedback Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOYBB1, pp. 27-31.
- J. R. Calvey, K. C. Harkay, and C. Yao, “Ion Effects in the APS Particle Accumulator Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1123-1125.
- K. Tsuchiya, T. Ogitsu, N. Ohuchi, N. Toge, and T. Ozaki, “Construction of the Final Focus Superconducting Magnet System for KEKB”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D071, pp. 573-575.
- G. S. Brown, V. P. Suller, and E. Zinin, “Measurement of Bunch Length with an Image Dissector Tube”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2348-2351.
- A. Sattarov, E. F. Holik, A. D. McInturff, and P. M. McIntyre, “Nb3Sn Block-coil Dipole for High-field Substitution in the LHC Lattice”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP104, pp. 1033-1034.
- T. Yamamoto et al., “Application of Portable 950 keV X-Band Linac X-Ray Source to Condition Based Maintenance for Pump-Impeller”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP003, pp. 1293-1295.
- G. Maero et al., “Simulation of Cooling Mechanisms of Highly-charged Ions in the HITRAP Cooler Trap”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper WEM2C06, pp. 130-133.
- C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2239-2241.
- Y. H. Chin, “Influence of the Synchrotron Radiation on the Particle Dynamics in a Rectangular Undulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 809-812.
- M. Kodaira et al., “Design and Performance of the Electron Synchrotron for the 1-GeV Synchrotron Radiation Source at Sortec”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 409-412.
- J. G. Power, M. E. Conde, W. Gai, W. Liu, and P. Piot, “Pepper-Pot Based Diagnostics for the Measurement of the 4D Transverse Phase Space Distribution from an RF Photoinjector at the AWA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP005, pp. 3444-3446.
- C. L. Olson, C. A. Frost, R. A. Gerber, and J. R. Woodworth, “The IFA-2 Collective Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3349-3352.
- M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 968-970.
- P. Krejcik et al., “Recent Improvements in the SLC Positron System Performance”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 527-530.
- R. Kinjo et al., “End Field Termination for Bulk HTSC Staggered Array Undulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD029, pp. 3156-3158.
- W. M. Fawley and J.-L. Vay, “Fully Electromagnetic FEL Simulation via Lorentz-Boosted Frame Transformation”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB01, pp. 48-51.
- M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
Back to search