Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. J. Bennett, “A Single Pulse Method for Measuring the Release Curves of Radioactive Nuclear Beam Targets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP21C, pp. 2383-2385.
[n] S. J. Wei et al., “HEPS Storage Ring BPM Development”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper FRAO06, unpublished.
[n] V. V. Nesterov and A. R. Donaldson, “High Current High Accuracy IGBT Pulse Generator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA11, pp. 1251-1253.
[n] J. Sekutowicz, “Higher Order Mode Coupler for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93G04, pp. XX-XX.
[n] R. J. Sachtschale, C. Dickey, and P. Morcombe, “Development of a Modular and Upgradeable Fast Kicker Magnet System for the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA10, pp. 1248-1250.
[n] F. Marti and A. Gavalya, “Axial Injection in the K500 Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-05, pp. 484-487.
[n] S. Y. Zhang and V. Ptitsyn, “Proton Beam Emittance Growth at RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS107, pp. 1886-1888.
[n] K. A. Heinemann, D. Appel?Â, D. P. Barber, O. Beznosov, and J. A. Ellison, “Spin Dynamics in Modern Electron Storage Rings: Computational and Theoretical Aspects”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 127-133. doi:10.18429/JACoW-ICAP2018-MOPLG03
[n] J. W. Kwan, E. Henestroza, L. E. Ahle, and D. P. Grote, “Design of a Compact High Current Density Injector for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH013, pp. 2105-2107.
[n] Y. Sun, Y. J. Pei, L. G. Shen, Z. Shu, and X. C. Wang, “Kanthal Alloy Based S-Band Collinear Load R&D for Linear Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA074, pp. 1491-1493.
[n] R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n] N. Solyak, J.-P. Carneiro, V. A. Lebedev, J.-F. Ostiguy, and A. Saini, “Lattice Design and Beam Dynamics Studies for Project X”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB014, pp. 876-878.
[n] M. A. Leonova, “MICE Spectrometer Solenoid Magnetic Field Measurements”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO15, pp. 1337-1339.
[n] A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3372-3375. doi:10.18429/JACoW-IPAC2018-THPAK063
[n] Y. Ma, D. Z. Guo, P. He, B. Liu, and Y. C. Yang, “Preparation and Characterization of Non-Evaporable Ti-Zr-V Getter Films for HEPS”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 125-127. doi:10.18429/JACoW-FLS2018-WEP2PT023
[n] C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1788-1791. doi:10.18429/JACoW-IPAC2019-TUPRB046
[n] A. V. Zlobin, Y. Alexahin, V. Kashikhin, and N. V. Mokhov, “Magnet Designs for Muon Collider Ring and Interaction Regions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB053, pp. 388-390.
[n] S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
[n] M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523.
[n] K. Hayashi, M. Irikura, M. Y. Miyake, Y. Okubo, and H. Urakata, “Development of High-power Microwave Devices in Toshiba”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA139, pp. 511-513.
[n] Z. Q. Li et al., “Developed Spoke Cavity Module for Main Linac of China ADS HOM Simulations and Damping Scheme for CEPC Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 393-395. doi:10.18429/JACoW-SRF2017-TUPB005
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. J. Bennett, “A Single Pulse Method for Measuring the Release Curves of Radioactive Nuclear Beam Targets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP21C, pp. 2383-2385.
- S. J. Wei et al., “HEPS Storage Ring BPM Development”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper FRAO06, unpublished.
- V. V. Nesterov and A. R. Donaldson, “High Current High Accuracy IGBT Pulse Generator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA11, pp. 1251-1253.
- J. Sekutowicz, “Higher Order Mode Coupler for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93G04, pp. XX-XX.
- R. J. Sachtschale, C. Dickey, and P. Morcombe, “Development of a Modular and Upgradeable Fast Kicker Magnet System for the Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA10, pp. 1248-1250.
- F. Marti and A. Gavalya, “Axial Injection in the K500 Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-05, pp. 484-487.
- S. Y. Zhang and V. Ptitsyn, “Proton Beam Emittance Growth at RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS107, pp. 1886-1888.
- K. A. Heinemann, D. Appel?Â, D. P. Barber, O. Beznosov, and J. A. Ellison, “Spin Dynamics in Modern Electron Storage Rings: Computational and Theoretical Aspects”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 127-133.
- J. W. Kwan, E. Henestroza, L. E. Ahle, and D. P. Grote, “Design of a Compact High Current Density Injector for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH013, pp. 2105-2107.
- Y. Sun, Y. J. Pei, L. G. Shen, Z. Shu, and X. C. Wang, “Kanthal Alloy Based S-Band Collinear Load R&D for Linear Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA074, pp. 1491-1493.
- R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 848-851.
- N. Solyak, J.-P. Carneiro, V. A. Lebedev, J.-F. Ostiguy, and A. Saini, “Lattice Design and Beam Dynamics Studies for Project X”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB014, pp. 876-878.
- M. A. Leonova, “MICE Spectrometer Solenoid Magnetic Field Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO15, pp. 1337-1339.
- A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3372-3375.
- Y. Ma, D. Z. Guo, P. He, B. Liu, and Y. C. Yang, “Preparation and Characterization of Non-Evaporable Ti-Zr-V Getter Films for HEPS”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 125-127.
- C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1788-1791.
- A. V. Zlobin, Y. Alexahin, V. Kashikhin, and N. V. Mokhov, “Magnet Designs for Muon Collider Ring and Interaction Regions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB053, pp. 388-390.
- S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
- M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2520-2523.
- K. Hayashi, M. Irikura, M. Y. Miyake, Y. Okubo, and H. Urakata, “Development of High-power Microwave Devices in Toshiba”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA139, pp. 511-513.
- Z. Q. Li et al., “Developed Spoke Cavity Module for Main Linac of China ADS HOM Simulations and Damping Scheme for CEPC Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 393-395.
Back to search